1DAHDI_CFG(8) DAHDI_CFG(8)
2
3
4
6 dahdi_cfg - configures DAHDI kernel modules from /etc/dahdi/system.conf
7
9 dahdi_cfg [-c CFG_FILE] [-SNUM [-SCHANS]] [-s] [-f] [-t] [-v [-v ... ]
10 ]
11
12 dahdi_cfg -h
13
14
16 dahdi_cfg configures DAHDI interface cards from a config file.
17
18 You generally need to run it with a valid configurations in order for
19 DAHDI modules to work properly.
20
21 It must be run to configure every DAHDI span. Normally it is run from
22 the DAHDI init script.
23
24
26 -c CFG_FILE
27 Use an alternative configuration file instead of /etc/dahdi/sys‐
28 tem.conf
29
30 If CFG_FILE is '-', it is read from stdin.
31
32 -C CHANNELS
33 Only apply changes to channels in the specified range. Only
34 applicable when -S is in use.
35
36 -s
37 Only shutdown spans.
38
39 -S SPAN
40 Only apply changes to span no. SPAN. You also need to specify
41 the range of channels in the span explicitly with -C.
42
43 -f
44 Always configure every channel, even if it appears not to have
45 changed.
46
47 -t
48 Test mode. Don't do anything, just report what you wanted to do.
49
50 -v
51 Be more verbose. Add extra v-s for extra verbosity.
52
53 -h
54 Display a brief help message.
55
56
58 /etc/dahdi/system.conf
59 The default location for the configuration file.
60
61
63 dahdi_tool(8), dahdi_monitor(8), asterisk(8).
64
65
67 This manual page was written by Santiago Ruano Rincón <santiago@uni‐
68 cauca.edu.co> for the Debian system (but may be used by others). Per‐
69 mission is granted to copy, distribute and/or modify this document
70 under the terms of the GNU General Public License, Version 2 any later
71 version published by the Free Software Foundation.
72
73
74
75 16 Jun 2008 DAHDI_CFG(8)