1IBQUERYERRORS(8)              OpenIB Diagnostics              IBQUERYERRORS(8)
2
3
4

NAME

6       IBQUERYERRORS - query and report IB port counters
7

SYNOPSIS

9       ibqueryerrors [options]
10

DESCRIPTION

12       The  default behavior is to report the port error counters which exceed
13       a threshold for each port in the fabric.  The default threshold is zero
14       (0).  Error fields can also be suppressed entirely.
15
16       In  addition  to  reporting  errors  on  every port.  ibqueryerrors can
17       report the port transmit and receive data as well as report  full  link
18       information to the remote port if available.
19

OPTIONS

21       -s,  --suppress <err1,err2,...> Suppress the errors listed in the comma
22       separated list provided.
23
24       -c, --suppress-common Suppress some of the common "side  effect"  coun‐
25       ters.   These  counters  usually do not indicate an error condition and
26       can be usually be safely ignored.
27
28       -r, --report-port Report the  port  information.   This  includes  LID,
29       port,  external  port (if applicable), link speed setting, remote GUID,
30       remote port, remote external port  (if  applicable),  and  remote  node
31       description information.
32
33       --data Include the optional transmit and receive data counters.
34
35       --threshold-file  <filename>  Specify an alternate threshold file.  The
36       default is /etc/infiniband-diags/error_thresholds
37
38       --switch  print data for switch's only
39
40       --ca  print data for CA's only
41
42       --skip-sl  Use the default sl for queries. This is not recommended when
43       using a QoS aware routing engine as it can cause a credit deadlock.
44
45       --router  print data for routers only
46
47       --clear-errors -k Clear error counters after read.
48
49       --clear-counts -K Clear data counters after read.
50
51       CAUTION  clearing  data  or  error counters will occur regardless of if
52       they are printed or not.  See --counters and --data for details on con‐
53       trolling which counters are printed.
54
55       --details include receive error and transmit discard details
56
57       --counters print data counters only
58
59   Partial Scan flags
60       The  node  to  start a partial scan can be specified with the following
61       addresses.
62
63       --port-guid, -G <port_guid>  Specify a port_guid
64
65       -D, --Direct <dr_path>     The address specified is a directed route
66
67          Examples:
68             -D "0"          # self port
69             -D "0,1,2,1,4"  # out via port 1, then 2, ...
70
71             (Note the second number in the path specified must match the port being
72             used.  This can be specified using the port selection flag '-P' or the
73             port found through the automatic selection process.)
74
75       Note: For switches results are printed for all ports  not  just  switch
76       port 0.
77
78       -S <port_guid> same as "-G". (provided only for backward compatibility)
79
80   Cache File flags
81       --load-cache  <filename>  Load  and  use  the cached ibnetdiscover data
82       stored in the specified filename.  May be  useful  for  outputting  and
83       learning about other fabrics or a previous state of a fabric.
84
85   Port Selection flags
86       -C, --Ca <ca_name>    use the specified ca_name.
87
88       -P, --Port <ca_port>    use the specified ca_port.
89
90   Local port Selection
91       Multiple  port/Multiple CA support: when no IB device or port is speci‐
92       fied (see the "local umad parameters"  below),  the  libibumad  library
93       selects the port to use by the following criteria:
94
95          1. the first port that is ACTIVE.
96
97          2. if not found, the first port that is UP (physical link up).
98
99          If  a  port  and/or  CA  name  is  specified,  the libibumad library
100          attempts to fulfill the user request, and will fail  if  it  is  not
101          possible.
102
103          For example:
104
105              ibaddr                 # use the first port (criteria #1 above)
106              ibaddr -C mthca1       # pick the best port from "mthca1" only.
107              ibaddr -P 2            # use the second (active/up) port from the first available IB device.
108              ibaddr -C mthca0 -P 2  # use the specified port only.
109
110   Configuration flags
111       --config, -z  <config_file> Specify alternate config file.
112          Default: /etc/infiniband-diags/ibdiag.conf
113
114       --outstanding_smps, -o <val>
115              Specify  the  number of outstanding SMP's which should be issued
116              during the scan
117
118              Default: 2
119
120       --node-name-map <node-name-map> Specify a node name map.
121          This file maps GUIDs to more user friendly names.   See  FILES  sec‐
122          tion.
123
124       -t,  --timeout  <timeout_ms>  override  the  default  timeout  for  the
125       solicited mads.
126
127       -y, --m_key <key>
128              use the specified M_key for requests. If non-numeric value (like
129              'x') is specified then a value will be prompted for.
130
131   Debugging flags
132       -d     raise  the  IB debugging level.  May be used several times (-ddd
133              or -d -d -d).
134
135       -e     show send and receive errors (timeouts and others)
136
137       -h, --help      show the usage message
138
139       -v, --verbose
140              increase the application verbosity level.  May be  used  several
141              times (-vv or -v -v -v)
142
143       -V, --version     show the version info.
144
145       -R  (This option is obsolete and does nothing)
146

EXIT STATUS

148       -1 if scan fails.
149
150       0 if scan succeeds without errors beyond thresholds
151
152       1 if errors are found beyond thresholds or inconsistencies are found in
153       check mode.
154

FILES

156   ERROR THRESHOLD
157       /etc/infiniband-diags/error_thresholds
158
159       Define threshold values for errors.  File format is simple  "name=val".
160       Comments begin with '#'
161
162       Example:
163
164          # Define thresholds for error counters
165          SymbolErrorCounter=10
166          LinkErrorRecoveryCounter=10
167          VL15Dropped=100
168
169   CONFIG FILE
170       /etc/infiniband-diags/ibdiag.conf
171
172       A  global config file is provided to set some of the common options for
173       all tools.  See supplied config file for details.
174
175   NODE NAME MAP FILE FORMAT
176       The node name map is used to specify user friendly names for  nodes  in
177       the output.  GUIDs are used to perform the lookup.
178
179       This  functionality  is  provided  by  the  opensm-libs  package.   See
180       opensm(8) for the file location for your installation.
181
182       Generically:
183
184          # comment
185          <guid> "<name>"
186
187       Example:
188
189          # IB1
190          # Line cards
191          0x0008f104003f125c "IB1 (Rack 11 slot 1   ) ISR9288/ISR9096 Voltaire sLB-24D"
192          0x0008f104003f125d "IB1 (Rack 11 slot 1   ) ISR9288/ISR9096 Voltaire sLB-24D"
193          0x0008f104003f10d2 "IB1 (Rack 11 slot 2   ) ISR9288/ISR9096 Voltaire sLB-24D"
194          0x0008f104003f10d3 "IB1 (Rack 11 slot 2   ) ISR9288/ISR9096 Voltaire sLB-24D"
195          0x0008f104003f10bf "IB1 (Rack 11 slot 12  ) ISR9288/ISR9096 Voltaire sLB-24D"
196
197          # Spines
198          0x0008f10400400e2d "IB1 (Rack 11 spine 1   ) ISR9288 Voltaire sFB-12D"
199          0x0008f10400400e2e "IB1 (Rack 11 spine 1   ) ISR9288 Voltaire sFB-12D"
200          0x0008f10400400e2f "IB1 (Rack 11 spine 1   ) ISR9288 Voltaire sFB-12D"
201          0x0008f10400400e31 "IB1 (Rack 11 spine 2   ) ISR9288 Voltaire sFB-12D"
202          0x0008f10400400e32 "IB1 (Rack 11 spine 2   ) ISR9288 Voltaire sFB-12D"
203
204          # GUID   Node Name
205          0x0008f10400411a08 "SW1  (Rack  3) ISR9024 Voltaire 9024D"
206          0x0008f10400411a28 "SW2  (Rack  3) ISR9024 Voltaire 9024D"
207          0x0008f10400411a34 "SW3  (Rack  3) ISR9024 Voltaire 9024D"
208          0x0008f104004119d0 "SW4  (Rack  3) ISR9024 Voltaire 9024D"
209

AUTHOR

211       Ira Weiny
212              < ira.weiny@intel.com >
213
214
215
216
217                                  2016-09-26                  IBQUERYERRORS(8)
Impressum