1SNMPTRAPD(8)                       Net-SNMP                       SNMPTRAPD(8)
2
3
4

NAME

6       snmptrapd - Receive and log SNMP trap messages.
7

SYNOPSIS

9       snmptrapd [OPTIONS] [LISTENING ADDRESSES]
10

DESCRIPTION

12       snmptrapd  is  an SNMP application that receives and logs SNMP TRAP and
13       INFORM messages.
14
15       Note: the default is to listen on UDP port 162 on all IPv4  interfaces.
16       Since  162  is  a  privileged  port, snmptrapd must typically be run as
17       root.
18

OPTIONS

20       -a      Ignore authenticationFailure traps.
21
22       -A      Append to the log file rather than truncating it.
23
24               Note that this needs to come before any  -Lf  options  that  it
25               should apply to.
26
27       -c FILE Read FILE as a configuration file (or a comma-separated list of
28               configuration files).
29
30       -C      Do not read any configuration files except the  one  optionally
31               specified by the -c option.
32
33       -d      Dump (in hexadecimal) the sent and received SNMP packets.
34
35       -D[TOKEN[,...]]
36               Turn  on  debugging output for the given TOKEN(s).  Try ALL for
37               extremely verbose output.
38
39       -f      Do not fork() from the calling shell.
40
41       -F FORMAT
42               When logging to standard output, use the format in  the  string
43               FORMAT.   See  the section FORMAT SPECIFICATIONS below for more
44               details.
45
46       -h, --help
47               Display a brief usage message and then exit.
48
49       -H      Display a list of configuration file directives  understood  by
50               the trap daemon and then exit.
51
52       -I [-]INITLIST
53               Specifies  which  modules should (or should not) be initialized
54               when snmptrapd starts up.  If the comma-separated  INITLIST  is
55               preceded  with a '-', it is the list of modules that should not
56               be started.  Otherwise this is the list  of  the  only  modules
57               that should be started.
58
59               To get a list of compiled modules, run snmptrapd with the argu‐
60               ments -Dmib_init -H (assuming debugging support has  been  com‐
61               piled in).
62
63       -L[efos]
64               Specify where logging output should be directed (standard error
65               or output, to a file or via syslog).  See  LOGGING  OPTIONS  in
66               snmpcmd(1) for details.
67
68       -m MIBLIST
69               Specifies  a  colon  separated  list of MIB modules to load for
70               this application.   This  overrides  the  environment  variable
71               MIBS.  See snmpcmd(1) for details.
72
73       -M DIRLIST
74               Specifies  a  colon separated list of directories to search for
75               MIBs.  This overrides the environment  variable  MIBDIRS.   See
76               snmpcmd(1) for details.
77
78       -n      Do  not attempt to translate source addresses of incoming pack‐
79               ets into hostnames.
80
81       -p FILE Save the process ID of the trap daemon in FILE.
82
83       -O [abeEfnqQsStTuUvxX]
84               Specifies how MIB objects and other output should be displayed.
85               See  the  section  OUTPUT OPTIONS in the snmpcmd(1) manual page
86               for details.
87
88       -t      Do not log traps to syslog.  This disables logging  to  syslog.
89               This  is  useful  if you want the snmptrapd application to only
90               run traphandle hooks and not to log any traps to any location.
91
92       -v, --version
93               Print version information for the trap daemon and then exit.
94
95       -x ADDRESS
96               Connect to the AgentX master agent on  the  specified  address,
97               rather than the default "/var/agentx/master".  See snmpd(8) for
98               details of the format of such addresses.
99
100       -X      Do not connect to a AgentX master agent
101
102       --name="value"
103               Allows one to specify  any  token  ("name")  supported  in  the
104               snmptrapd.conf  file  and  sets its value to "value". Overrides
105               the  corresponding  token  in  the  snmptrapd.conf  file.   See
106               snmptrapd.conf(5) for the full list of tokens.
107

FORMAT SPECIFICATIONS

109       snmptrapd  interprets format strings similarly to printf(3).  It under‐
110       stands the following formatting sequences:
111
112           %%  a literal %
113
114           %a  the contents of the agent-addr field of the PDU (v1 TRAPs only)
115
116           %A  the hostname corresponding to the contents  of  the  agent-addr
117               field  of  the PDU, if available, otherwise the contents of the
118               agent-addr field of the PDU (v1 TRAPs only).
119
120           %b  PDU transport address (Note: this is not  necessarily  an  IPv4
121               address).
122               Something like "[UDP: [172.16.10.12]:23456->[10.150.0.8]]"
123
124           %B  PDU  source hostname if available, otherwise PDU source address
125               (see note above)
126
127           %E  SNMPv3 context engine id
128
129           %h  current hour on the local system
130
131           %H  the hour field from the sysUpTime.0 varbind
132
133           %j  current minute on the local system
134
135           %J  the minute field from the sysUpTime.0 varbind
136
137           %k  current second on the local system
138
139           %K  the seconds field from the sysUpTime.0 varbind
140
141           %l  current day of month on the local system
142
143           %L  the day of month field from the sysUpTime.0 varbind
144
145           %m  current (numeric) month on the local system
146
147           %M  the numeric month field from the sysUpTime.0 varbind
148
149           %N  enterprise string
150
151           %P  security information from the PDU (community name  for  v1/v2c,
152               user and context for v3)
153
154           %q  trap sub-type (numeric, in decimal)
155
156           %s  SNMP version number (0: v1, 1: v2c, 2: v3)
157
158           %S  SNMPv3 security model version number
159
160           %t  decimal  number of seconds since the operating system epoch (as
161               returned by time(2))
162
163           %T  the value of the sysUpTime.0 varbind in seconds
164
165           %u  SNMPv3 security name, or v1/v2c community name
166
167           %v  list of variable-bindings from the notification payload.  These
168               will  be  separated  by a tab, or by a comma and a blank if the
169               alternate form is requested See also %V
170
171           %V  specifies  the  variable-bindings  separator.  This   takes   a
172               sequence  of  characters, up to the next % (to embed a % in the
173               string, use \%)
174
175           %w  trap type (numeric, in decimal)
176
177           %W  trap description
178
179           %y  current year on the local system
180
181           %Y  the year field from the sysUpTime.0 varbind
182
183       In addition to these values, an optional field width and precision  may
184       also be specified , just as in printf(3), and a flag value. The follow‐
185       ing flags are supported:
186
187           -   left justify
188
189           0   use leading zeros
190
191           #   use alternate form
192
193       The "use alternate form" flag changes the behavior  of  various  format
194       string sequences:
195
196              Time information will be displayed based on GMT (rather than the
197              local timezone)
198
199              The variable-bindings will be  a  comma-separated  list  (rather
200              than a tab-separated one)
201
202              The  system  uptime  will be broken down into a human-meaningful
203              format (rather than being a simple integer)
204
205   Examples:
206       To get a message like "14:03 TRAP3.1 from humpty.ucd.edu" you could use
207       something like this:
208
209              snmptrapd -P -F "%02.2h:%02.2j TRAP%w.%q from %A\n"
210
211       If you want the same thing but in GMT rather than local time, use
212
213              snmptrapd -P -F "%#02.2h:%#02.2j TRAP%w.%q from %A\n"
214

LISTENING ADDRESSES

216       By default, snmptrapd listens for incoming SNMP TRAP and INFORM packets
217       on UDP port 162 on all IPv4 interfaces.  However,  it  is  possible  to
218       modify  this behaviour by specifying one or more listening addresses as
219       arguments to snmptrapd.  See the snmpd(8) manual page for more informa‐
220       tion about the format of listening addresses.
221

NOTIFICATION-LOG-MIB SUPPORT

223       As  of  net-snmp  5.0, the snmptrapd application supports the NOTIFICA‐
224       TION-LOG-MIB.  It does this by opening an AgentX subagent connection to
225       the master snmpd agent and registering the notification log tables.  As
226       long as the snmpd application is started first, it will  attach  itself
227       to  it  and thus you should be able to view the last recorded notifica‐
228       tions  via  the   nlmLogTable   and   nlmLogVariableTable.    See   the
229       snmptrapd.conf  file  and  the  "doNotRetainNotificationLogs" token for
230       turning off  this  support.   See  the  NOTIFICATION-LOG-MIB  for  more
231       details about the MIB itself.
232

EXTENSIBILITY AND CONFIGURATION

234       See the snmptrapd.conf(5) manual page.
235

SEE ALSO

237       snmpcmd(1), snmpd(8), printf(3), snmptrapd.conf(5), syslog(8), traptoe‐
238       mail(1), variables(5)
239
240
241
242V5.9                              27 Apr 2014                     SNMPTRAPD(8)
Impressum