1DUNE-UTOP(1)                      Dune Manual                     DUNE-UTOP(1)
2
3
4

NAME

6       dune-utop - Load library in utop
7

SYNOPSIS

9       dune utop [OPTION]... [DIR] [ARGS]...
10

DESCRIPTION

12       dune utop DIR build and run utop toplevel with libraries defined in DIR
13

OPTIONS

15       --build-info
16           Show build information.
17
18       --context=CONTEXT (absent=default)
19           Select context where to build/run utop.
20
21       -f, --force
22           Force actions associated to aliases to be re-executed even if their
23           dependencies haven't changed.
24
25       --help[=FMT] (default=auto)
26           Show this help in format FMT. The value FMT must be one of `auto',
27           `pager', `groff' or `plain'. With `auto', the format is `pager` or
28           `plain' whenever the TERM env var is `dumb' or undefined.
29
30       --sandbox=VAL (absent DUNE_SANDBOX env)
31           Sandboxing mode to use by default. Some actions require a certain
32           sandboxing mode, so they will ignore this setting. The allowed
33           values are: none, symlink, copy.
34
35       --version
36           Show version information.
37
38       -w, --watch
39           Instead of terminating build after completion, wait continuously
40           for file changes.
41

COMMON OPTIONS

43       These options are common to all commands.
44
45       --always-show-command-line
46           Always show the full command lines of programs executed by dune
47
48       --auto-promote
49           Automatically promote files. This is similar to running dune
50           promote after the build.
51
52       --build-dir=FILE (absent DUNE_BUILD_DIR env)
53           Specified build directory. _build if unspecified
54
55       --cache=VAL (absent DUNE_CACHE env)
56           Activate binary cache (either `disabled' or `enabled'). Default is
57           `disabled'.
58
59       --cache-check-probability=VAL (absent=0. or
60       DUNE_CACHE_CHECK_PROBABILITY env)
61           Probability cached rules are rerun to check for reproducibility
62
63       --cache-duplication=VAL (absent DUNE_CACHE_DUPLICATION env)
64           Binary cache duplication mode
65
66       --cache-transport=VAL (absent DUNE_CACHE_TRANSPORT env)
67           Binary cache protocol
68
69       --config-file=FILE
70           Load this configuration file instead of the default one.
71
72       --debug-artifact-substitution
73           Print debugging info about artifact substitution
74
75       --debug-backtraces
76           Always print exception backtraces.
77
78       --debug-dependency-path
79           In case of error, print the dependency path from the targets on the
80           command line to the rule that failed.
81
82       --debug-findlib
83           Debug the findlib sub-system.
84
85       --default-target=TARGET (absent=@@default)
86           Set the default target that when none is specified to dune build.
87
88       --diff-command=VAL
89           Shell command to use to diff files. Use - to disable printing the
90           diff.
91
92       --disable-promotion (absent DUNE_DISABLE_PROMOTION env)
93           Disable all promotion rules
94
95       --display=MODE
96           Control the display mode of Dune. See dune-config(5) for more
97           details.
98
99       --ignore-promoted-rules
100           Ignore rules with (mode promote), except ones with (only ...). The
101           variable %{ignoring_promoted_rules} in dune files reflects whether
102           this option was passed or not.
103
104       --instrument-with=BACKENDS (absent DUNE_INSTRUMENT_WITH env)
105           "Enable instrumentation by BACKENDS. BACKENDS is a comma-separated
106           list of library names, each one of which must declare an
107           instrumentation backend.
108
109       -j JOBS
110           Run no more than JOBS commands simultaneously.
111
112       --no-buffer
113           Do not buffer the output of commands executed by dune. By default
114           dune buffers the output of subcommands, in order to prevent
115           interleaving when multiple commands are executed in parallel.
116           However, this can be an issue when debugging long running tests.
117           With --no-buffer, commands have direct access to the terminal. Note
118           that as a result their output won't be captured in the log file.
119           You should use this option in conjunction with -j 1, to avoid
120           interleaving. Additionally you should use --verbose as well, to
121           make sure that commands are printed before they are being executed.
122
123       --no-config
124           Do not load the configuration file
125
126       --no-print-directory
127           Suppress "Entering directory" messages
128
129       --only-packages=PACKAGES
130           Ignore stanzas referring to a package that is not in PACKAGES.
131           PACKAGES is a comma-separated list of package names. Note that this
132           has the same effect as deleting the relevant stanzas from dune
133           files. It is mostly meant for releases. During development, it is
134           likely that what you want instead is to build a particular
135           <package>.install target.
136
137       -p PACKAGES, --for-release-of-packages=PACKAGES (required)
138           Shorthand for --release --only-packages PACKAGE. You must use this
139           option in your <package>.opam files, in order to build only what's
140           necessary when your project contains multiple packages as well as
141           getting reproducible builds.
142
143       --profile=VAL (absent DUNE_PROFILE env)
144           Select the build profile, for instance dev or release. The default
145           is dev.
146
147       --promote-install-files[=VAL] (default=true)
148           Promote the generated <package>.install files to the source tree
149
150       --release
151           Put dune into a reproducible release mode. This is in fact a
152           shorthand for --root . --ignore-promoted-rules --no-config
153           --profile release --always-show-command-line
154           --promote-install-files --default-target @install. You should use
155           this option for release builds. For instance, you must use this
156           option in your <package>.opam files. Except if you already use -p,
157           as -p implies this option.
158
159       --root=DIR
160           Use this directory as workspace root instead of guessing it. Note
161           that this option doesn't change the interpretation of targets given
162           on the command line. It is only intended for scripts.
163
164       --store-orig-source-dir (absent DUNE_STORE_ORIG_SOURCE_DIR env)
165           Store original source location in dune-package metadata
166
167       --terminal-persistence=MODE
168           Changes how the log of build results are displayed to the console
169           between rebuilds while in --watch mode. Supported modes: preserve,
170           clear-on-rebuild.
171
172       --trace-file=FILE
173           Output trace data in catapult format (compatible with
174           chrome://tracing)
175
176       --verbose
177           Same as --display verbose
178
179       --workspace=FILE (absent DUNE_WORKSPACE env)
180           Use this specific workspace file instead of looking it up.
181
182       -x VAL
183           Cross-compile using this toolchain.
184

MORE HELP

186       Use `dune COMMAND --help' for help on a single command.
187

ENVIRONMENT

189       These environment variables affect the execution of utop:
190
191       DUNE_BUILD_DIR
192           Specified build directory. _build if unspecified
193
194       DUNE_CACHE
195           Activate binary cache (either `disabled' or `enabled'). Default is
196           `disabled'.
197
198       DUNE_CACHE_CHECK_PROBABILITY
199           Probability cached rules are rerun to check for reproducibility
200
201       DUNE_CACHE_DUPLICATION
202           Binary cache duplication mode
203
204       DUNE_CACHE_TRANSPORT
205           Binary cache protocol
206
207       DUNE_DISABLE_PROMOTION
208           Disable all promotion rules
209
210       DUNE_INSTRUMENT_WITH
211           "Enable instrumentation by BACKENDS. BACKENDS is a comma-separated
212           list of library names, each one of which must declare an
213           instrumentation backend.
214
215       DUNE_PROFILE
216           Build profile. dev if unspecified or release if -p is set.
217
218       DUNE_SANDBOX
219           Sandboxing mode to use by default. (see --sandbox)
220
221       DUNE_STORE_ORIG_SOURCE_DIR
222           Store original source location in dune-package metadata
223
224       DUNE_WORKSPACE
225           Use this specific workspace file instead of looking it up.
226

BUGS

228       Check bug reports at https://github.com/ocaml/dune/issues
229
230
231
232Dune n/a                                                          DUNE-UTOP(1)
Impressum