1LOGGEN(1)                   The loggen manual page                   LOGGEN(1)
2
3
4

NAME

6       loggen - Generate syslog messages at a specified rate
7

SYNOPSIS

9       loggen [options]target [port]
10

DESCRIPTION

12       NOTE: The loggen application is distributed with the syslog-ng system
13       logging application, and is usually part of the syslog-ng package. The
14       latest version of the syslog-ng application is available at the
15       official syslog-ng website[1].
16
17       This manual page is only an abstract, for the complete documentation of
18       syslog-ng, see The syslog-ng Administrator Guide[2].
19
20       The loggen application is tool to test and stress-test your syslog
21       server and the connection to the server. It can send syslog messages to
22       the server at a specified rate, using a number of connection types and
23       protocols, including TCP, UDP, and unix domain sockets. The messages
24       can be generated automatically (repeating the PADDstring over and
25       over), or read from a file or the standard input.
26
27       When loggen finishes sending the messages, it displays the following
28       statistics:
29
30average rate: Average rate the messages were sent in
31           messages/second.
32
33count: The total number of messages sent.
34
35time: The time required to send the messages in seconds.
36
37average message size: The average size of the sent messages in
38           bytes.
39
40bandwidth: The average bandwidth used for sending the messages in
41           kilobytes/second.
42

OPTIONS

44       --active-connections <number-of-connections>
45           Number of connections loggen will use to send messages to the
46           destination. This option is usable only when using TCP or TLS
47           connections to the destination. Default value: 1
48
49           The loggen utility waits until every connection is established
50           before starting to send messages. See also the --idle-connections
51           option.
52
53       --csv or -C
54           Send the statistics of the sent messages to stdout as CSV. This can
55           be used for plotting the message rate.
56
57       --dgram or -D
58           Use datagram socket (UDP or unix-dgram) to send the messages to the
59           target. Requires the --inet option as well.
60
61       --dont-parse or -d
62           Do not parse the lines read from the input files, send them as
63           received.
64
65       --help or -h
66           Display a brief help message.
67
68       --idle-connections <number-of-connections>
69           Number of idle connections loggen will establish to the
70           destination. Note that loggen will not send any messages on idle
71           connections, but the connection is kept open using keep-alive
72           messages. This option is usable only when using TCP or TLS
73           connections to the destination. See also the --active-connections
74           option. Default value: 0
75
76       --inet or -i
77           Use the TCP (by default) or UDP (when used together with the
78           --dgram option) protocol to send the messages to the target.
79
80       --interval <seconds> or -I <seconds>
81           The number of seconds loggen will run. Default value: 10
82
83               Note
84               Note that when the --interval and --number are used together,
85               loggen will send messages until the period set in --interval
86               expires or the amount of messages set in --number is reached,
87               whichever happens first.
88
89       --ipv6 or -6
90           Specify the destination using its IPv6 address. Note that the
91           destination must have a real IPv6 address.
92
93       --loop-reading or -l
94           Read the file specified in --read-file option in loop: loggen will
95           start reading from the beginning of the file when it reaches the
96           end of the file.
97
98       --number <number-of-messages> or -n <number-of-messages>
99           Number of messages to generate.
100
101               Note
102               Note that when the --interval and --number are used together,
103               loggen will send messages until the period set in --interval
104               expires or the amount of messages set in --number is reached,
105               whichever happens first.
106
107       --no-framing or -F
108           Do not use the framing of the IETF-syslog protocol style, even if
109           the syslog-proto option is set.
110
111       --quiet or -Q
112           Output statistics only when the execution of loggen is finished. If
113           not set, the statistics are displayed every second.
114
115       --permanent or -T
116           Keep sending logs indefinitely, without time limit.
117
118       --rate <message/second> or -r <message/second>
119           The number of messages generated per second for every active
120           connection. Default value: 1000
121
122       --read-file <filename> or -R <filename>
123           Read the messages from a file and send them to the target. See also
124           the --skip-tokens option.
125
126           Specify - as the input file to read messages from the standard
127           input (stdio). Note that when reading messages from the standard
128           input, loggen can only use a single thread. The -R - parameters
129           must be placed at end of command, like: loggen 127.0.0.1 1061
130           --read-file -
131
132       --sdata <data-to-send> or -p <data-to-send>
133           Send the argument of the --sdata option as the SDATA part of
134           IETF-syslog (RFC5424 formatted) messages. Use it together with the
135           --syslog-proto option. For example: --sdata "[test name=\"value\"]
136
137       --size <message-size> or -s <message-size>
138           The size of a syslog message in bytes. Default value: 256. Minimum
139           value: 127 bytes, maximum value: 8192 bytes.
140
141       --skip-tokens <number>
142           Skips the specified number of space-separated tokens (words) at the
143           beginning of every line. For example, if the messages in the file
144           look like foo bar message, --skip-tokens 2 skips the foo bar part
145           of the line, and sends only the message part. Works only when used
146           together with the --read-file parameter. Default value: 0
147
148       --stream or -S
149           Use a stream socket (TCP or unix-stream) to send the messages to
150           the target.
151
152       --syslog-proto or -P
153           Use the new IETF-syslog message format as specified in RFC5424. By
154           default, loggen uses the legacy BSD-syslog message format (as
155           described in RFC3164). See also the --no-framing option.
156
157       --unix </path/to/socket> or -x </path/to/socket>
158           Use a UNIX domain socket to send the messages to the target.
159
160       --use-ssl or -U
161           Use an SSL-encrypted channel to send the messages to the target.
162           Note that it is not possible to check the certificate of the
163           target, or to perform mutual authentication.
164
165       --version or -V
166           Display version number of syslog-ng.
167

EXAMPLES

169       The following command generates 100 messages per second for ten
170       minutes, and sends them to port 2010 of the localhost via TCP. Each
171       message is 300 bytes long.
172
173           loggen --stream --size 300 --rate 100 --interval 600 127.0.0.1 2010
174
175       The following command is similar to the one above, but uses the UDP
176       protocol.
177
178           loggen --inet --dgram --size 300 --rate 100 --interval 600 127.0.0.1 2010
179
180       Send a single message on TCP6 to the ::1 IPv6 address, port 1061:
181
182           loggen --ipv6 --number 1 ::1 1061
183
184       Send a single message on UDP6 to the ::1 IPv6 address, port 1061:
185
186           loggen --ipv6 --dgram --number 1 ::1 1061
187
188       Send a single message using a unix domain-socket:
189
190           loggen --unix --stream --number 1 </path/to/socket>
191
192       Read messages from the standard input (stdio) and send them to the
193       localhost:
194
195           loggen 127.0.0.1 1061 --read-file -
196

FILES

198       /usr/local/bin/loggen
199

SEE ALSO

201       syslog-ng.conf(5)
202
203           Note
204           For the detailed documentation of see The 3.33 Administrator
205           Guide[3]
206
207           If you experience any problems or need help with syslog-ng, visit
208           the syslog-ng mailing list[4].
209
210           For news and notifications about of syslog-ng, visit the syslog-ng
211           blogs[5].
212

AUTHOR

214       This manual page was written by the Balabit Documentation Team
215       <documentation@balabit.com>.
216

NOTES

219        1. the official syslog-ng website
220           https://www.balabit.com/log-management
221
222        2. The syslog-ng Administrator Guide
223           https://www.balabit.com/support/documentation/
224
225        3. The  3.33 Administrator Guide
226           https://www.balabit.com/documents/syslog-ng-ose-latest-guides/en/syslog-ng-ose-guide-admin/html/index.html
227
228        4. syslog-ng mailing list
229           https://lists.balabit.hu/mailman/listinfo/syslog-ng
230
231        5. syslog-ng blogs
232           https://syslog-ng.org/blogs/
233
234
235
2363.33                              07/19/2021                         LOGGEN(1)
Impressum