1MYSQLBINLOG(1) MySQL Database System MYSQLBINLOG(1)
2
6 mysqlbinlog - utility for processing binary log files
7
9 mysqlbinlog [options] log_file ...
10
12 The server's binary log consists of files containing “events” that
13 describe modifications to database contents. The server writes these
14 files in binary format. To display their contents in text format, use
15 the mysqlbinlog utility. You can also use mysqlbinlog to display the
16 contents of relay log files written by a replica server in a
17 replication setup because relay logs have the same format as binary
18 logs. The binary log and relay log are discussed further in
19 Section 5.4.4, “The Binary Log”, and Section 17.2.4, “Relay Log and
20 Replication Metadata Repositories”.
21 Invoke mysqlbinlog like this:
23 mysqlbinlog [options] log_file ...
25 For example, to display the contents of the binary log file named
27 binlog.000003, use this command:
28 mysqlbinlog binlog.0000003
30 The output includes events contained in binlog.000003. For
32 statement-based logging, event information includes the SQL statement,
33 the ID of the server on which it was executed, the timestamp when the
34 statement was executed, how much time it took, and so forth. For
35 row-based logging, the event indicates a row change rather than an SQL
36 statement. See Section 17.2.1, “Replication Formats”, for information
37 about logging modes.
38 Events are preceded by header comments that provide additional
40 information. For example:
41 # at 141
43 #100309 9:28:36 server id 123 end_log_pos 245
44 Query thread_id=3350 exec_time=11 error_code=0
45 In the first line, the number following at indicates the file offset,
47 or starting position, of the event in the binary log file.
48 The second line starts with a date and time indicating when the
50 statement started on the server where the event originated. For
51 replication, this timestamp is propagated to replica servers. server
52 id is the server_id value of the server where the event originated.
53 end_log_pos indicates where the next event starts (that is, it is the
54 end position of the current event + 1). thread_id indicates which
55 thread executed the event. exec_time is the time spent executing the
56 event, on a replication source server. On a replica, it is the
57 difference of the end execution time on the replica minus the beginning
58 execution time on the source. The difference serves as an indicator of
59 how much replication lags behind the source. error_code indicates the
60 result from executing the event. Zero means that no error occurred.
61 Note
63 When using event groups, the file offsets of events may be grouped
64 together and the comments of events may be grouped together. Do not
65 mistake these grouped events for blank file offsets.
66 The output from mysqlbinlog can be re-executed (for example, by using
68 it as input to mysql) to redo the statements in the log. This is useful
69 for recovery operations after an unexpected server exit. For other
70 usage examples, see the discussion later in this section and in
71 Section 7.5, “Point-in-Time (Incremental) Recovery”. To execute the
72 internal-use BINLOG statements used by mysqlbinlog, the user requires
73 the BINLOG_ADMIN privilege (or the deprecated SUPER privilege), or the
74 REPLICATION_APPLIER privilege plus the appropriate privileges to
75 execute each log event.
76 You can use mysqlbinlog to read binary log files directly and apply
78 them to the local MySQL server. You can also read binary logs from a
79 remote server by using the --read-from-remote-server option. To read
80 remote binary logs, the connection parameter options can be given to
81 indicate how to connect to the server. These options are --host,
82 --password, --port, --protocol, --socket, and --user.
83 When binary log files have been encrypted, which can be done from MySQL
85 8.0.14 onwards, mysqlbinlog cannot read them directly, but can read
86 them from the server using the --read-from-remote-server option. Binary
87 log files are encrypted when the server's binlog_encryption system
88 variable is set to ON. The SHOW BINARY LOGS statement shows whether a
89 particular binary log file is encrypted or unencrypted. Encrypted and
90 unencrypted binary log files can also be distinguished using the magic
91 number at the start of the file header for encrypted log files
92 (0xFD62696E), which differs from that used for unencrypted log files
93 (0xFE62696E). Note that from MySQL 8.0.14, mysqlbinlog returns a
94 suitable error if you attempt to read an encrypted binary log file
95 directly, but older versions of mysqlbinlog do not recognise the file
96 as a binary log file at all. For more information on binary log
97 encryption, see Section 17.3.2, “Encrypting Binary Log Files and Relay
98 Log Files”.
99 When binary log transaction payloads have been compressed, which can be
101 done from MySQL 8.0.20 onwards, mysqlbinlog versions from that release
102 on automatically decompress and decode the transaction payloads, and
103 print them as they would uncompressed events. Older versions of
104 mysqlbinlog cannot read compressed transaction payloads. When the
105 server's binlog_transaction_compression system variable is set to ON,
106 transaction payloads are compressed and then written to the server's
107 binary log file as a single event (a Transaction_payload_event). With
108 the --verbose option, mysqlbinlog adds comments stating the compression
109 algorithm used, the compressed payload size that was originally
110 received, and the resulting payload size after decompression.
111 Note
113 The end position (end_log_pos) that mysqlbinlog states for an
114 individual event that was part of a compressed transaction payload
115 is the same as the end position of the original compressed payload.
116 Multiple decompressed events can therefore have the same end
117 position.
118 mysqlbinlog's own connection compression does less if transaction
120 payloads are already compressed, but still operates on uncompressed
121 transactions and headers.
122 For more information on binary log transaction compression, see
124 Section 5.4.4.5, “Binary Log Transaction Compression”.
125 When running mysqlbinlog against a large binary log, be careful that
127 the filesystem has enough space for the resulting files. To configure
128 the directory that mysqlbinlog uses for temporary files, use the TMPDIR
129 environment variable.
130 mysqlbinlog sets the value of pseudo_replica_mode or pseudo_slave_mode
132 to true before executing any SQL statements. This system variable
133 affects the handling of XA transactions, the original_commit_timestamp
134 replication delay timestamp and the original_server_version system
135 variable, and unsupported SQL modes.
136 mysqlbinlog supports the following options, which can be specified on
138 the command line or in the [mysqlbinlog] and [client] groups of an
139 option file. For information about option files used by MySQL programs,
140 see Section 4.2.2.2, “Using Option Files”.
141 • --help, -? Display a help message and exit.
143 • --base64-output=value This option determines when events should be
145 displayed encoded as base-64 strings using BINLOG statements. The
146 option has these permissible values (not case-sensitive):
147 • AUTO ("automatic") or UNSPEC ("unspecified") displays BINLOG
149 statements automatically when necessary (that is, for format
150 description events and row events). If no --base64-output
151 option is given, the effect is the same as
152 --base64-output=AUTO.
153 Note
155 Automatic BINLOG display is the only safe behavior if you
156 intend to use the output of mysqlbinlog to re-execute
157 binary log file contents. The other option values are
158 intended only for debugging or testing purposes because
159 they may produce output that does not include all events in
160 executable form.
161 • NEVER causes BINLOG statements not to be displayed.
163 mysqlbinlog exits with an error if a row event is found that
164 must be displayed using BINLOG.
165 • DECODE-ROWS specifies to mysqlbinlog that you intend for row
167 events to be decoded and displayed as commented SQL statements
168 by also specifying the --verbose option. Like NEVER,
169 DECODE-ROWS suppresses display of BINLOG statements, but unlike
170 NEVER, it does not exit with an error if a row event is found.
171 For examples that show the effect of --base64-output and --verbose
173 on row event output, see the section called “MYSQLBINLOG ROW EVENT
174 DISPLAY”.
175 • --bind-address=ip_address On a computer having multiple network
177 interfaces, use this option to select which interface to use for
178 connecting to the MySQL server.
179 • --binlog-row-event-max-size=N
181 ┌────────────────────┬─────────────────────────┐
183 │Command-Line Format │ --binlog-row-event-max- │
184 │ │ size=# │
185 ├────────────────────┼─────────────────────────┤
186 │Type │ Numeric │
187 ├────────────────────┼─────────────────────────┤
188 │Default Value │ 4294967040 │
189 ├────────────────────┼─────────────────────────┤
190 │Minimum Value │ 256 │
191 ├────────────────────┼─────────────────────────┤
192 │Maximum Value │ 18446744073709547520 │
193 └────────────────────┴─────────────────────────┘
194 Specify the maximum size of a row-based binary log event, in bytes.
195 Rows are grouped into events smaller than this size if possible.
196 The value should be a multiple of 256. The default is 4GB.
197 • --character-sets-dir=dir_name The directory where character sets
199 are installed. See Section 10.15, “Character Set Configuration”.
200 • --compress Compress all information sent between the client and the
202 server if possible. See Section 4.2.8, “Connection Compression
203 Control”.
204 This option was added in MySQL 8.0.17. As of MySQL 8.0.18 it is
206 deprecated. Expect it to be removed in a future version of MySQL.
207 See the section called “Configuring Legacy Connection Compression”.
208 • --compression-algorithms=value The permitted compression algorithms
210 for connections to the server. The available algorithms are the
211 same as for the protocol_compression_algorithms system variable.
212 The default value is uncompressed.
213 For more information, see Section 4.2.8, “Connection Compression
215 Control”.
216 This option was added in MySQL 8.0.18.
218 • --connection-server-id=server_id --connection-server-id specifies
220 the server ID that mysqlbinlog reports when it connects to the
221 server. It can be used to avoid a conflict with the ID of a replica
222 server or another mysqlbinlog process.
223 If the --read-from-remote-server option is specified, mysqlbinlog
225 reports a server ID of 0, which tells the server to disconnect
226 after sending the last log file (nonblocking behavior). If the
227 --stop-never option is also specified to maintain the connection to
228 the server, mysqlbinlog reports a server ID of 1 by default instead
229 of 0, and --connection-server-id can be used to replace that server
230 ID if required. See the section called “SPECIFYING THE MYSQLBINLOG
231 SERVER ID”.
232 • --database=db_name, -d db_name This option causes mysqlbinlog to
234 output entries from the binary log (local log only) that occur
235 while db_name is been selected as the default database by USE.
236 The --database option for mysqlbinlog is similar to the
238 --binlog-do-db option for mysqld, but can be used to specify only
239 one database. If --database is given multiple times, only the last
240 instance is used.
241 The effects of this option depend on whether the statement-based or
243 row-based logging format is in use, in the same way that the
244 effects of --binlog-do-db depend on whether statement-based or
245 row-based logging is in use.
246 Statement-based logging. The --database option works as follows:
248 • While db_name is the default database, statements are output
250 whether they modify tables in db_name or a different database.
251 • Unless db_name is selected as the default database, statements
253 are not output, even if they modify tables in db_name.
254 • There is an exception for CREATE DATABASE, ALTER DATABASE, and
256 DROP DATABASE. The database being created, altered, or dropped
257 is considered to be the default database when determining
258 whether to output the statement.
259 Suppose that the binary log was created by executing these
261 statements using statement-based-logging:
262 INSERT INTO test.t1 (i) VALUES(100);
264 INSERT INTO db2.t2 (j) VALUES(200);
265 USE test;
266 INSERT INTO test.t1 (i) VALUES(101);
267 INSERT INTO t1 (i) VALUES(102);
268 INSERT INTO db2.t2 (j) VALUES(201);
269 USE db2;
270 INSERT INTO test.t1 (i) VALUES(103);
271 INSERT INTO db2.t2 (j) VALUES(202);
272 INSERT INTO t2 (j) VALUES(203);
273 mysqlbinlog --database=test does not output the first two INSERT
275 statements because there is no default database. It outputs the
276 three INSERT statements following USE test, but not the three
277 INSERT statements following USE db2.
278 mysqlbinlog --database=db2 does not output the first two INSERT
280 statements because there is no default database. It does not output
281 the three INSERT statements following USE test, but does output the
282 three INSERT statements following USE db2.
283 Row-based logging. mysqlbinlog outputs only entries that change
285 tables belonging to db_name. The default database has no effect on
286 this. Suppose that the binary log just described was created using
287 row-based logging rather than statement-based logging. mysqlbinlog
288 --database=test outputs only those entries that modify t1 in the
289 test database, regardless of whether USE was issued or what the
290 default database is. If a server is running with binlog_format set
291 to MIXED and you want it to be possible to use mysqlbinlog with the
292 --database option, you must ensure that tables that are modified
293 are in the database selected by USE. (In particular, no
294 cross-database updates should be used.)
295 When used together with the --rewrite-db option, the --rewrite-db
297 option is applied first; then the --database option is applied,
298 using the rewritten database name. The order in which the options
299 are provided makes no difference in this regard.
300 • --debug[=debug_options], -# [debug_options] Write a debugging log.
302 A typical debug_options string is d:t:o,file_name. The default is
303 d:t:o,/tmp/mysqlbinlog.trace.
304 This option is available only if MySQL was built using WITH_DEBUG.
306 MySQL release binaries provided by Oracle are not built using this
307 option.
308 • --debug-check Print some debugging information when the program
310 exits.
311 This option is available only if MySQL was built using WITH_DEBUG.
313 MySQL release binaries provided by Oracle are not built using this
314 option.
315 • --debug-info Print debugging information and memory and CPU usage
317 statistics when the program exits.
318 This option is available only if MySQL was built using WITH_DEBUG.
320 MySQL release binaries provided by Oracle are not built using this
321 option.
322 • --default-auth=plugin A hint about which client-side authentication
324 plugin to use. See Section 6.2.17, “Pluggable Authentication”.
325 • --defaults-extra-file=file_name Read this option file after the
327 global option file but (on Unix) before the user option file. If
328 the file does not exist or is otherwise inaccessible, an error
329 occurs. If file_name is not an absolute path name, it is
330 interpreted relative to the current directory.
331 For additional information about this and other option-file
333 options, see Section 4.2.2.3, “Command-Line Options that Affect
334 Option-File Handling”.
335 • --defaults-file=file_name Use only the given option file. If the
337 file does not exist or is otherwise inaccessible, an error occurs.
338 If file_name is not an absolute path name, it is interpreted
339 relative to the current directory.
340 Exception: Even with --defaults-file, client programs read
342 .mylogin.cnf.
343 For additional information about this and other option-file
345 options, see Section 4.2.2.3, “Command-Line Options that Affect
346 Option-File Handling”.
347 • --defaults-group-suffix=str Read not only the usual option groups,
349 but also groups with the usual names and a suffix of str. For
350 example, mysqlbinlog normally reads the [client] and [mysqlbinlog]
351 groups. If this option is given as --defaults-group-suffix=_other,
352 mysqlbinlog also reads the [client_other] and [mysqlbinlog_other]
353 groups.
354 For additional information about this and other option-file
356 options, see Section 4.2.2.3, “Command-Line Options that Affect
357 Option-File Handling”.
358 • --disable-log-bin, -D Disable binary logging. This is useful for
360 avoiding an endless loop if you use the --to-last-log option and
361 are sending the output to the same MySQL server. This option also
362 is useful when restoring after an unexpected exit to avoid
363 duplication of the statements you have logged.
364 This option causes mysqlbinlog to include a SET sql_log_bin = 0
366 statement in its output to disable binary logging of the remaining
367 output. Manipulating the session value of the sql_log_bin system
368 variable is a restricted operation, so this option requires that
369 you have privileges sufficient to set restricted session variables.
370 See Section 5.1.9.1, “System Variable Privileges”.
371 • --exclude-gtids=gtid_set Do not display any of the groups listed in
373 the gtid_set.
374 • --force-if-open, -F Read binary log files even if they are open or
376 were not closed properly.
377 • --force-read, -f With this option, if mysqlbinlog reads a binary
379 log event that it does not recognize, it prints a warning, ignores
380 the event, and continues. Without this option, mysqlbinlog stops if
381 it reads such an event.
382 • --get-server-public-key Request from the server the public key
384 required for RSA key pair-based password exchange. This option
385 applies to clients that authenticate with the caching_sha2_password
386 authentication plugin. For that plugin, the server does not send
387 the public key unless requested. This option is ignored for
388 accounts that do not authenticate with that plugin. It is also
389 ignored if RSA-based password exchange is not used, as is the case
390 when the client connects to the server using a secure connection.
391 If --server-public-key-path=file_name is given and specifies a
393 valid public key file, it takes precedence over
394 --get-server-public-key.
395 For information about the caching_sha2_password plugin, see
397 Section 6.4.1.2, “Caching SHA-2 Pluggable Authentication”.
398 • --hexdump, -H Display a hex dump of the log in comments, as
400 described in the section called “MYSQLBINLOG HEX DUMP FORMAT”. The
401 hex output can be helpful for replication debugging.
402 • --host=host_name, -h host_name Get the binary log from the MySQL
404 server on the given host.
405 • --idempotent Tell the MySQL Server to use idempotent mode while
407 processing updates; this causes suppression of any duplicate-key or
408 key-not-found errors that the server encounters in the current
409 session while processing updates. This option may prove useful
410 whenever it is desirable or necessary to replay one or more binary
411 logs to a MySQL Server which may not contain all of the data to
412 which the logs refer.
413 The scope of effect for this option includes the current
415 mysqlbinlog client and session only.
416 • --include-gtids=gtid_set Display only the groups listed in the
418 gtid_set.
419 • --local-load=dir_name, -l dir_name For data loading operations
421 corresponding to LOAD DATA statements, mysqlbinlog extracts the
422 files from the binary log events, writes them as temporary files to
423 the local file system, and writes LOAD DATA LOCAL statements to
424 cause the files to be loaded. By default, mysqlbinlog writes these
425 temporary files to an operating system-specific directory. The
426 --local-load option can be used to explicitly specify the directory
427 where mysqlbinlog should prepare local temporary files.
428 Because other processes can write files to the default
430 system-specific directory, it is advisable to specify the
431 --local-load option to mysqlbinlog to designate a different
432 directory for data files, and then designate that same directory by
433 specifying the --load-data-local-dir option to mysql when
434 processing the output from mysqlbinlog. For example:
435 mysqlbinlog --local-load=/my/local/data ...
437 | mysql --load-data-local-dir=/my/local/data ...
438 Important
440 These temporary files are not automatically removed by
441 mysqlbinlog or any other MySQL program.
442 • --login-path=name Read options from the named login path in the
444 .mylogin.cnf login path file. A “login path” is an option group
445 containing options that specify which MySQL server to connect to
446 and which account to authenticate as. To create or modify a login
447 path file, use the mysql_config_editor utility. See
448 mysql_config_editor(1).
449 For additional information about this and other option-file
451 options, see Section 4.2.2.3, “Command-Line Options that Affect
452 Option-File Handling”.
453 • --no-defaults Do not read any option files. If program startup
455 fails due to reading unknown options from an option file,
456 --no-defaults can be used to prevent them from being read.
457 The exception is that the .mylogin.cnf file is read in all cases,
459 if it exists. This permits passwords to be specified in a safer way
460 than on the command line even when --no-defaults is used. To create
461 .mylogin.cnf, use the mysql_config_editor utility. See
462 mysql_config_editor(1).
463 For additional information about this and other option-file
465 options, see Section 4.2.2.3, “Command-Line Options that Affect
466 Option-File Handling”.
467 • --offset=N, -o N Skip the first N entries in the log.
469 • --open-files-limit=N Specify the number of open file descriptors to
471 reserve.
472 • --password[=password], -p[password] The password of the MySQL
474 account used for connecting to the server. The password value is
475 optional. If not given, mysqlbinlog prompts for one. If given,
476 there must be no space between --password= or -p and the password
477 following it. If no password option is specified, the default is to
478 send no password.
479 Specifying a password on the command line should be considered
481 insecure. To avoid giving the password on the command line, use an
482 option file. See Section 6.1.2.1, “End-User Guidelines for Password
483 Security”.
484 To explicitly specify that there is no password and that
486 mysqlbinlog should not prompt for one, use the --skip-password
487 option.
488 • --plugin-dir=dir_name The directory in which to look for plugins.
490 Specify this option if the --default-auth option is used to specify
491 an authentication plugin but mysqlbinlog does not find it. See
492 Section 6.2.17, “Pluggable Authentication”.
493 • --port=port_num, -P port_num The TCP/IP port number to use for
495 connecting to a remote server.
496 • --print-defaults Print the program name and all options that it
498 gets from option files.
499 For additional information about this and other option-file
501 options, see Section 4.2.2.3, “Command-Line Options that Affect
502 Option-File Handling”.
503 • --print-table-metadata Print table related metadata from the binary
505 log. Configure the amount of table related metadata binary logged
506 using binlog-row-metadata.
507 • --protocol={TCP|SOCKET|PIPE|MEMORY} The transport protocol to use
509 for connecting to the server. It is useful when the other
510 connection parameters normally result in use of a protocol other
511 than the one you want. For details on the permissible values, see
512 Section 4.2.7, “Connection Transport Protocols”.
513 • --raw By default, mysqlbinlog reads binary log files and writes
515 events in text format. The --raw option tells mysqlbinlog to write
516 them in their original binary format. Its use requires that
517 --read-from-remote-server also be used because the files are
518 requested from a server. mysqlbinlog writes one output file for
519 each file read from the server. The --raw option can be used to
520 make a backup of a server's binary log. With the --stop-never
521 option, the backup is “live” because mysqlbinlog stays connected to
522 the server. By default, output files are written in the current
523 directory with the same names as the original log files. Output
524 file names can be modified using the --result-file option. For more
525 information, see the section called “USING MYSQLBINLOG TO BACK UP
526 BINARY LOG FILES”.
527 • --read-from-remote-source=type From MySQL 8.0.26, use
529 --read-from-remote-source, and before MySQL 8.0.26, use
530 --read-from-remote-master. Both options have the same effect. The
531 options read binary logs from a MySQL server with the
532 COM_BINLOG_DUMP or COM_BINLOG_DUMP_GTID commands by setting the
533 option value to either BINLOG-DUMP-NON-GTIDS or BINLOG-DUMP-GTIDS,
534 respectively. If --read-from-remote-source=BINLOG-DUMP-GTIDS or
535 --read-from-remote-master=BINLOG-DUMP-GTIDS is combined with
536 --exclude-gtids, transactions can be filtered out on the source,
537 avoiding unnecessary network traffic.
538 The connection parameter options are used with these options or the
540 --read-from-remote-server option. These options are --host,
541 --password, --port, --protocol, --socket, and --user. If none of
542 the remote options is specified, the connection parameter options
543 are ignored.
544 The REPLICATION SLAVE privilege is required to use these options.
546 • --read-from-remote-master=type Use this option before MySQL 8.0.26
548 rather than --read-from-remote-source. Both options have the same
549 effect.
550 • --read-from-remote-server, -R Read the binary log from a MySQL
552 server rather than reading a local log file. This option requires
553 that the remote server be running. It works only for binary log
554 files on the remote server, not relay log files.
555 The connection parameter options are used with this option or the
557 --read-from-remote-master option. These options are --host,
558 --password, --port, --protocol, --socket, and --user. If neither of
559 the remote options is specified, the connection parameter options
560 are ignored.
561 The REPLICATION SLAVE privilege is required to use this option.
563 This option is like
565 --read-from-remote-master=BINLOG-DUMP-NON-GTIDS.
566 • --result-file=name, -r name Without the --raw option, this option
568 indicates the file to which mysqlbinlog writes text output. With
569 --raw, mysqlbinlog writes one binary output file for each log file
570 transferred from the server, writing them by default in the current
571 directory using the same names as the original log file. In this
572 case, the --result-file option value is treated as a prefix that
573 modifies output file names.
574 • --require-row-format Require row-based binary logging format for
576 events. This option enforces row-based replication events for
577 mysqlbinlog output. The stream of events produced with this option
578 would be accepted by a replication channel that is secured using
579 the REQUIRE_ROW_FORMAT option of the CHANGE REPLICATION SOURCE TO
580 statement (from MySQL 8.0.23) or CHANGE MASTER TO statement (before
581 MySQL 8.0.23). binlog_format=ROW must be set on the server where
582 the binary log was written. When you specify this option,
583 mysqlbinlog stops with an error message if it encounters any events
584 that are disallowed under the REQUIRE_ROW_FORMAT restrictions,
585 including LOAD DATA INFILE instructions, creating or dropping
586 temporary tables, INTVAR, RAND, or USER_VAR events, and
587 non-row-based events within a DML transaction. mysqlbinlog also
588 prints a SET @@session.require_row_format statement at the start of
589 its output to apply the restrictions when the output is executed,
590 and does not print the SET @@session.pseudo_thread_id statement.
591 This option was added in MySQL 8.0.19.
593 • --rewrite-db='from_name->to_name' When reading from a row-based or
595 statement-based log, rewrite all occurrences of from_name to
596 to_name. Rewriting is done on the rows, for row-based logs, as well
597 as on the USE clauses, for statement-based logs.
598 Warning
600 Statements in which table names are qualified with database
601 names are not rewritten to use the new name when using this
602 option.
603 The rewrite rule employed as a value for this option is a string
604 having the form 'from_name->to_name', as shown previously, and for
605 this reason must be enclosed by quotation marks.
606 To employ multiple rewrite rules, specify the option multiple
608 times, as shown here:
609 mysqlbinlog --rewrite-db='dbcurrent->dbold' --rewrite-db='dbtest->dbcurrent' \
611 binlog.00001 > /tmp/statements.sql
612 When used together with the --database option, the --rewrite-db
614 option is applied first; then --database option is applied, using
615 the rewritten database name. The order in which the options are
616 provided makes no difference in this regard.
617 This means that, for example, if mysqlbinlog is started with
619 --rewrite-db='mydb->yourdb' --database=yourdb, then all updates to
620 any tables in databases mydb and yourdb are included in the output.
621 On the other hand, if it is started with
622 --rewrite-db='mydb->yourdb' --database=mydb, then mysqlbinlog
623 outputs no statements at all: since all updates to mydb are first
624 rewritten as updates to yourdb before applying the --database
625 option, there remain no updates that match --database=mydb.
626 • --server-id=id Display only those events created by the server
628 having the given server ID.
629 • --server-id-bits=N Use only the first N bits of the server_id to
631 identify the server. If the binary log was written by a mysqld with
632 server-id-bits set to less than 32 and user data stored in the most
633 significant bit, running mysqlbinlog with --server-id-bits set to
634 32 enables this data to be seen.
635 This option is supported only by the version of mysqlbinlog
637 supplied with the NDB Cluster distribution, or built with NDB
638 Cluster support.
639 • --server-public-key-path=file_name The path name to a file in PEM
641 format containing a client-side copy of the public key required by
642 the server for RSA key pair-based password exchange. This option
643 applies to clients that authenticate with the sha256_password or
644 caching_sha2_password authentication plugin. This option is ignored
645 for accounts that do not authenticate with one of those plugins. It
646 is also ignored if RSA-based password exchange is not used, as is
647 the case when the client connects to the server using a secure
648 connection.
649 If --server-public-key-path=file_name is given and specifies a
651 valid public key file, it takes precedence over
652 --get-server-public-key.
653 For sha256_password, this option applies only if MySQL was built
655 using OpenSSL.
656 For information about the sha256_password and caching_sha2_password
658 plugins, see Section 6.4.1.3, “SHA-256 Pluggable Authentication”,
659 and Section 6.4.1.2, “Caching SHA-2 Pluggable Authentication”.
660 • --set-charset=charset_name Add a SET NAMES charset_name statement
662 to the output to specify the character set to be used for
663 processing log files.
664 • --shared-memory-base-name=name On Windows, the shared-memory name
666 to use for connections made using shared memory to a local server.
667 The default value is MYSQL. The shared-memory name is
668 case-sensitive.
669 This option applies only if the server was started with the
671 shared_memory system variable enabled to support shared-memory
672 connections.
673 • --short-form, -s Display only the statements contained in the log,
675 without any extra information or row-based events. This is for
676 testing only, and should not be used in production systems. It is
677 deprecated, and you should expect it to be removed in a future
678 release.
679 • --skip-gtids[=(true|false)] Do not display any GTIDs in the output.
681 This is needed when writing to a dump file from one or more binary
682 logs containing GTIDs, as shown in this example:
683 mysqlbinlog --skip-gtids binlog.000001 > /tmp/dump.sql
685 mysqlbinlog --skip-gtids binlog.000002 >> /tmp/dump.sql
686 mysql -u root -p -e "source /tmp/dump.sql"
687 The use of this option is otherwise not normally recommended in
689 production.
690 • --socket=path, -S path For connections to localhost, the Unix
692 socket file to use, or, on Windows, the name of the named pipe to
693 use.
694 On Windows, this option applies only if the server was started with
696 the named_pipe system variable enabled to support named-pipe
697 connections. In addition, the user making the connection must be a
698 member of the Windows group specified by the
699 named_pipe_full_access_group system variable.
700 • --ssl* Options that begin with --ssl specify whether to connect to
702 the server using encryption and indicate where to find SSL keys and
703 certificates. See the section called “Command Options for Encrypted
704 Connections”.
705 • --ssl-fips-mode={OFF|ON|STRICT} Controls whether to enable FIPS
707 mode on the client side. The --ssl-fips-mode option differs from
708 other --ssl-xxx options in that it is not used to establish
709 encrypted connections, but rather to affect which cryptographic
710 operations to permit. See Section 6.8, “FIPS Support”.
711 These --ssl-fips-mode values are permitted:
713 • OFF: Disable FIPS mode.
715 • ON: Enable FIPS mode.
717 • STRICT: Enable “strict” FIPS mode.
719 Note
722 If the OpenSSL FIPS Object Module is not available, the only
723 permitted value for --ssl-fips-mode is OFF. In this case,
724 setting --ssl-fips-mode to ON or STRICT causes the client to
725 produce a warning at startup and to operate in non-FIPS mode.
726 • --start-datetime=datetime Start reading the binary log at the first
728 event having a timestamp equal to or later than the datetime
729 argument. The datetime value is relative to the local time zone on
730 the machine where you run mysqlbinlog. The value should be in a
731 format accepted for the DATETIME or TIMESTAMP data types. For
732 example:
733 mysqlbinlog --start-datetime="2005-12-25 11:25:56" binlog.000003
735 This option is useful for point-in-time recovery. See Section 7.5,
737 “Point-in-Time (Incremental) Recovery”.
738 • --start-position=N, -j N Start decoding the binary log at the log
740 position N, including in the output any events that begin at
741 position N or after. The position is a byte point in the log file,
742 not an event counter; it needs to point to the starting position of
743 an event to generate useful output. This option applies to the
744 first log file named on the command line.
745 This option is useful for point-in-time recovery. See Section 7.5,
747 “Point-in-Time (Incremental) Recovery”.
748 • --stop-datetime=datetime Stop reading the binary log at the first
750 event having a timestamp equal to or later than the datetime
751 argument. See the description of the --start-datetime option for
752 information about the datetime value.
753 This option is useful for point-in-time recovery. See Section 7.5,
755 “Point-in-Time (Incremental) Recovery”.
756 • --stop-never This option is used with --read-from-remote-server. It
758 tells mysqlbinlog to remain connected to the server. Otherwise
759 mysqlbinlog exits when the last log file has been transferred from
760 the server. --stop-never implies --to-last-log, so only the first
761 log file to transfer need be named on the command line.
762 --stop-never is commonly used with --raw to make a live binary log
764 backup, but also can be used without --raw to maintain a continuous
765 text display of log events as the server generates them.
766 With --stop-never, by default, mysqlbinlog reports a server ID of 1
768 when it connects to the server. Use --connection-server-id to
769 explicitly specify an alternative ID to report. It can be used to
770 avoid a conflict with the ID of a replica server or another
771 mysqlbinlog process. See the section called “SPECIFYING THE
772 MYSQLBINLOG SERVER ID”.
773 • --stop-never-slave-server-id=id This option is deprecated; expect
775 it to be removed in a future release. Use the
776 --connection-server-id option instead to specify a server ID for
777 mysqlbinlog to report.
778 • --stop-position=N Stop decoding the binary log at the log position
780 N, excluding from the output any events that begin at position N or
781 after. The position is a byte point in the log file, not an event
782 counter; it needs to point to a spot after the starting position of
783 the last event you want to include in the output. The event
784 starting before position N and finishing at or after the position
785 is the last event to be processed. This option applies to the last
786 log file named on the command line.
787 This option is useful for point-in-time recovery. See Section 7.5,
789 “Point-in-Time (Incremental) Recovery”.
790 • --tls-ciphersuites=ciphersuite_list The permissible ciphersuites
792 for encrypted connections that use TLSv1.3. The value is a list of
793 one or more colon-separated ciphersuite names. The ciphersuites
794 that can be named for this option depend on the SSL library used to
795 compile MySQL. For details, see Section 6.3.2, “Encrypted
796 Connection TLS Protocols and Ciphers”.
797 This option was added in MySQL 8.0.16.
799 • --tls-version=protocol_list The permissible TLS protocols for
801 encrypted connections. The value is a list of one or more
802 comma-separated protocol names. The protocols that can be named for
803 this option depend on the SSL library used to compile MySQL. For
804 details, see Section 6.3.2, “Encrypted Connection TLS Protocols and
805 Ciphers”.
806 • --to-last-log, -t Do not stop at the end of the requested binary
808 log from a MySQL server, but rather continue printing until the end
809 of the last binary log. If you send the output to the same MySQL
810 server, this may lead to an endless loop. This option requires
811 --read-from-remote-server.
812 • --user=user_name, -u user_name The user name of the MySQL account
814 to use when connecting to a remote server.
815 • --verbose, -v Reconstruct row events and display them as commented
817 SQL statements, with table partition information where applicable.
818 If this option is given twice (by passing in either "-vv" or
819 "--verbose --verbose"), the output includes comments to indicate
820 column data types and some metadata, and informational log events
821 such as row query log events if the binlog_rows_query_log_events
822 system variable is set to TRUE.
823 For examples that show the effect of --base64-output and --verbose
825 on row event output, see the section called “MYSQLBINLOG ROW EVENT
826 DISPLAY”.
827 • --verify-binlog-checksum, -c Verify checksums in binary log files.
829 • --version, -V Display version information and exit.
831 The mysqlbinlog version number shown when using this option is 3.4.
833 • --zstd-compression-level=level The compression level to use for
835 connections to the server that use the zstd compression algorithm.
836 The permitted levels are from 1 to 22, with larger values
837 indicating increasing levels of compression. The default zstd
838 compression level is 3. The compression level setting has no effect
839 on connections that do not use zstd compression.
840 For more information, see Section 4.2.8, “Connection Compression
842 Control”.
843 This option was added in MySQL 8.0.18.
845 You can pipe the output of mysqlbinlog into the mysql client to execute
847 the events contained in the binary log. This technique is used to
848 recover from an unexpected exit when you have an old backup (see
849 Section 7.5, “Point-in-Time (Incremental) Recovery”). For example:
850 mysqlbinlog binlog.000001 | mysql -u root -p
852 Or:
854 mysqlbinlog binlog.[0-9]* | mysql -u root -p
856 If the statements produced by mysqlbinlog may contain BLOB values,
858 these may cause problems when mysql processes them. In this case,
859 invoke mysql with the --binary-mode option.
860 You can also redirect the output of mysqlbinlog to a text file instead,
862 if you need to modify the statement log first (for example, to remove
863 statements that you do not want to execute for some reason). After
864 editing the file, execute the statements that it contains by using it
865 as input to the mysql program:
866 mysqlbinlog binlog.000001 > tmpfile
868 ... edit tmpfile ...
869 mysql -u root -p < tmpfile
870 When mysqlbinlog is invoked with the --start-position option, it
872 displays only those events with an offset in the binary log greater
873 than or equal to a given position (the given position must match the
874 start of one event). It also has options to stop and start when it sees
875 an event with a given date and time. This enables you to perform
876 point-in-time recovery using the --stop-datetime option (to be able to
877 say, for example, “roll forward my databases to how they were today at
878 10:30 a.m.”).
879 Processing multiple files. If you have more than one binary log to
881 execute on the MySQL server, the safe method is to process them all
882 using a single connection to the server. Here is an example that
883 demonstrates what may be unsafe:
884 mysqlbinlog binlog.000001 | mysql -u root -p # DANGER!!
886 mysqlbinlog binlog.000002 | mysql -u root -p # DANGER!!
887 Processing binary logs this way using multiple connections to the
889 server causes problems if the first log file contains a CREATE
890 TEMPORARY TABLE statement and the second log contains a statement that
891 uses the temporary table. When the first mysql process terminates, the
892 server drops the temporary table. When the second mysql process
893 attempts to use the table, the server reports “unknown table.”
894 To avoid problems like this, use a single mysql process to execute the
896 contents of all binary logs that you want to process. Here is one way
897 to do so:
898 mysqlbinlog binlog.000001 binlog.000002 | mysql -u root -p
900 Another approach is to write all the logs to a single file and then
902 process the file:
903 mysqlbinlog binlog.000001 > /tmp/statements.sql
905 mysqlbinlog binlog.000002 >> /tmp/statements.sql
906 mysql -u root -p -e "source /tmp/statements.sql"
907 From MySQL 8.0.12, you can also supply multiple binary log files to
909 mysqlbinlog as streamed input using a shell pipe. An archive of
910 compressed binary log files can be decompressed and provided directly
911 to mysqlbinlog. In this example, binlog-files_1.gz contains multiple
912 binary log files for processing. The pipeline extracts the contents of
913 binlog-files_1.gz, pipes the binary log files to mysqlbinlog as
914 standard input, and pipes the output of mysqlbinlog into the mysql
915 client for execution:
916 gzip -cd binlog-files_1.gz | ./mysqlbinlog - | ./mysql -uroot -p
918 You can specify more than one archive file, for example:
920 gzip -cd binlog-files_1.gz binlog-files_2.gz | ./mysqlbinlog - | ./mysql -uroot -p
922 For streamed input, do not use --stop-position, because mysqlbinlog
924 cannot identify the last log file to apply this option.
925 LOAD DATA operations. mysqlbinlog can produce output that reproduces a
927 LOAD DATA operation without the original data file. mysqlbinlog copies
928 the data to a temporary file and writes a LOAD DATA LOCAL statement
929 that refers to the file. The default location of the directory where
930 these files are written is system-specific. To specify a directory
931 explicitly, use the --local-load option.
932 Because mysqlbinlog converts LOAD DATA statements to LOAD DATA LOCAL
934 statements (that is, it adds LOCAL), both the client and the server
935 that you use to process the statements must be configured with the
936 LOCAL capability enabled. See Section 6.1.6, “Security Considerations
937 for LOAD DATA LOCAL”.
938 Warning
940 The temporary files created for LOAD DATA LOCAL statements are not
941 automatically deleted because they are needed until you actually
942 execute those statements. You should delete the temporary files
943 yourself after you no longer need the statement log. The files can
944 be found in the temporary file directory and have names like
945 original_file_name-#-#.
946
948 The --hexdump option causes mysqlbinlog to produce a hex dump of the
949 binary log contents:
950 mysqlbinlog --hexdump source-bin.000001
952 The hex output consists of comment lines beginning with #, so the
954 output might look like this for the preceding command:
955 /*!40019 SET @@SESSION.max_insert_delayed_threads=0*/;
957 /*!50003 SET @OLD_COMPLETION_TYPE=@@COMPLETION_TYPE,COMPLETION_TYPE=0*/;
958 # at 4
959 #051024 17:24:13 server id 1 end_log_pos 98
960 # Position Timestamp Type Master ID Size Master Pos Flags
961 # 00000004 9d fc 5c 43 0f 01 00 00 00 5e 00 00 00 62 00 00 00 00 00
962 # 00000017 04 00 35 2e 30 2e 31 35 2d 64 65 62 75 67 2d 6c |..5.0.15.debug.l|
963 # 00000027 6f 67 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |og..............|
964 # 00000037 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
965 # 00000047 00 00 00 00 9d fc 5c 43 13 38 0d 00 08 00 12 00 |.......C.8......|
966 # 00000057 04 04 04 04 12 00 00 4b 00 04 1a |.......K...|
967 # Start: binlog v 4, server v 5.0.15-debug-log created 051024 17:24:13
968 # at startup
969 ROLLBACK;
970 Hex dump output currently contains the elements in the following list.
972 This format is subject to change. For more information about binary log
973 format, see MySQL Internals: The Binary Log[1].
974 • Position: The byte position within the log file.
976 • Timestamp: The event timestamp. In the example shown, '9d fc 5c 43'
978 is the representation of '051024 17:24:13' in hexadecimal.
979 • Type: The event type code.
981 • Master ID: The server ID of the replication source server that
983 created the event.
984 • Size: The size in bytes of the event.
986 • Master Pos: The position of the next event in the original source's
988 binary log file.
989 • Flags: Event flag values.
991
993 The following examples illustrate how mysqlbinlog displays row events
994 that specify data modifications. These correspond to events with the
995 WRITE_ROWS_EVENT, UPDATE_ROWS_EVENT, and DELETE_ROWS_EVENT type codes.
996 The --base64-output=DECODE-ROWS and --verbose options may be used to
997 affect row event output.
998 Suppose that the server is using row-based binary logging and that you
1000 execute the following sequence of statements:
1001 CREATE TABLE t
1003 (
1004 id INT NOT NULL,
1005 name VARCHAR(20) NOT NULL,
1006 date DATE NULL
1007 ) ENGINE = InnoDB;
1008 START TRANSACTION;
1009 INSERT INTO t VALUES(1, 'apple', NULL);
1010 UPDATE t SET name = 'pear', date = '2009-01-01' WHERE id = 1;
1011 DELETE FROM t WHERE id = 1;
1012 COMMIT;
1013 By default, mysqlbinlog displays row events encoded as base-64 strings
1015 using BINLOG statements. Omitting extraneous lines, the output for the
1016 row events produced by the preceding statement sequence looks like
1017 this:
1018 shell> mysqlbinlog log_file
1020 ...
1021 # at 218
1022 #080828 15:03:08 server id 1 end_log_pos 258 Write_rows: table id 17 flags: STMT_END_F
1023 BINLOG '
1024 fAS3SBMBAAAALAAAANoAAAAAABEAAAAAAAAABHRlc3QAAXQAAwMPCgIUAAQ=
1025 fAS3SBcBAAAAKAAAAAIBAAAQABEAAAAAAAEAA//8AQAAAAVhcHBsZQ==
1026 '/*!*/;
1027 ...
1028 # at 302
1029 #080828 15:03:08 server id 1 end_log_pos 356 Update_rows: table id 17 flags: STMT_END_F
1030 BINLOG '
1031 fAS3SBMBAAAALAAAAC4BAAAAABEAAAAAAAAABHRlc3QAAXQAAwMPCgIUAAQ=
1032 fAS3SBgBAAAANgAAAGQBAAAQABEAAAAAAAEAA////AEAAAAFYXBwbGX4AQAAAARwZWFyIbIP
1033 '/*!*/;
1034 ...
1035 # at 400
1036 #080828 15:03:08 server id 1 end_log_pos 442 Delete_rows: table id 17 flags: STMT_END_F
1037 BINLOG '
1038 fAS3SBMBAAAALAAAAJABAAAAABEAAAAAAAAABHRlc3QAAXQAAwMPCgIUAAQ=
1039 fAS3SBkBAAAAKgAAALoBAAAQABEAAAAAAAEAA//4AQAAAARwZWFyIbIP
1040 '/*!*/;
1041 To see the row events as comments in the form of “pseudo-SQL”
1043 statements, run mysqlbinlog with the --verbose or -v option. This
1044 output level also shows table partition information where applicable.
1045 The output contains lines beginning with ###:
1046 shell> mysqlbinlog -v log_file
1048 ...
1049 # at 218
1050 #080828 15:03:08 server id 1 end_log_pos 258 Write_rows: table id 17 flags: STMT_END_F
1051 BINLOG '
1052 fAS3SBMBAAAALAAAANoAAAAAABEAAAAAAAAABHRlc3QAAXQAAwMPCgIUAAQ=
1053 fAS3SBcBAAAAKAAAAAIBAAAQABEAAAAAAAEAA//8AQAAAAVhcHBsZQ==
1054 '/*!*/;
1055 ### INSERT INTO test.t
1056 ### SET
1057 ### @1=1
1058 ### @2='apple'
1059 ### @3=NULL
1060 ...
1061 # at 302
1062 #080828 15:03:08 server id 1 end_log_pos 356 Update_rows: table id 17 flags: STMT_END_F
1063 BINLOG '
1064 fAS3SBMBAAAALAAAAC4BAAAAABEAAAAAAAAABHRlc3QAAXQAAwMPCgIUAAQ=
1065 fAS3SBgBAAAANgAAAGQBAAAQABEAAAAAAAEAA////AEAAAAFYXBwbGX4AQAAAARwZWFyIbIP
1066 '/*!*/;
1067 ### UPDATE test.t
1068 ### WHERE
1069 ### @1=1
1070 ### @2='apple'
1071 ### @3=NULL
1072 ### SET
1073 ### @1=1
1074 ### @2='pear'
1075 ### @3='2009:01:01'
1076 ...
1077 # at 400
1078 #080828 15:03:08 server id 1 end_log_pos 442 Delete_rows: table id 17 flags: STMT_END_F
1079 BINLOG '
1080 fAS3SBMBAAAALAAAAJABAAAAABEAAAAAAAAABHRlc3QAAXQAAwMPCgIUAAQ=
1081 fAS3SBkBAAAAKgAAALoBAAAQABEAAAAAAAEAA//4AQAAAARwZWFyIbIP
1082 '/*!*/;
1083 ### DELETE FROM test.t
1084 ### WHERE
1085 ### @1=1
1086 ### @2='pear'
1087 ### @3='2009:01:01'
1088 Specify --verbose or -v twice to also display data types and some
1090 metadata for each column, and informational log events such as row
1091 query log events if the binlog_rows_query_log_events system variable is
1092 set to TRUE. The output contains an additional comment following each
1093 column change:
1094 shell> mysqlbinlog -vv log_file
1096 ...
1097 # at 218
1098 #080828 15:03:08 server id 1 end_log_pos 258 Write_rows: table id 17 flags: STMT_END_F
1099 BINLOG '
1100 fAS3SBMBAAAALAAAANoAAAAAABEAAAAAAAAABHRlc3QAAXQAAwMPCgIUAAQ=
1101 fAS3SBcBAAAAKAAAAAIBAAAQABEAAAAAAAEAA//8AQAAAAVhcHBsZQ==
1102 '/*!*/;
1103 ### INSERT INTO test.t
1104 ### SET
1105 ### @1=1 /* INT meta=0 nullable=0 is_null=0 */
1106 ### @2='apple' /* VARSTRING(20) meta=20 nullable=0 is_null=0 */
1107 ### @3=NULL /* VARSTRING(20) meta=0 nullable=1 is_null=1 */
1108 ...
1109 # at 302
1110 #080828 15:03:08 server id 1 end_log_pos 356 Update_rows: table id 17 flags: STMT_END_F
1111 BINLOG '
1112 fAS3SBMBAAAALAAAAC4BAAAAABEAAAAAAAAABHRlc3QAAXQAAwMPCgIUAAQ=
1113 fAS3SBgBAAAANgAAAGQBAAAQABEAAAAAAAEAA////AEAAAAFYXBwbGX4AQAAAARwZWFyIbIP
1114 '/*!*/;
1115 ### UPDATE test.t
1116 ### WHERE
1117 ### @1=1 /* INT meta=0 nullable=0 is_null=0 */
1118 ### @2='apple' /* VARSTRING(20) meta=20 nullable=0 is_null=0 */
1119 ### @3=NULL /* VARSTRING(20) meta=0 nullable=1 is_null=1 */
1120 ### SET
1121 ### @1=1 /* INT meta=0 nullable=0 is_null=0 */
1122 ### @2='pear' /* VARSTRING(20) meta=20 nullable=0 is_null=0 */
1123 ### @3='2009:01:01' /* DATE meta=0 nullable=1 is_null=0 */
1124 ...
1125 # at 400
1126 #080828 15:03:08 server id 1 end_log_pos 442 Delete_rows: table id 17 flags: STMT_END_F
1127 BINLOG '
1128 fAS3SBMBAAAALAAAAJABAAAAABEAAAAAAAAABHRlc3QAAXQAAwMPCgIUAAQ=
1129 fAS3SBkBAAAAKgAAALoBAAAQABEAAAAAAAEAA//4AQAAAARwZWFyIbIP
1130 '/*!*/;
1131 ### DELETE FROM test.t
1132 ### WHERE
1133 ### @1=1 /* INT meta=0 nullable=0 is_null=0 */
1134 ### @2='pear' /* VARSTRING(20) meta=20 nullable=0 is_null=0 */
1135 ### @3='2009:01:01' /* DATE meta=0 nullable=1 is_null=0 */
1136 You can tell mysqlbinlog to suppress the BINLOG statements for row
1138 events by using the --base64-output=DECODE-ROWS option. This is similar
1139 to --base64-output=NEVER but does not exit with an error if a row event
1140 is found. The combination of --base64-output=DECODE-ROWS and --verbose
1141 provides a convenient way to see row events only as SQL statements:
1142 shell> mysqlbinlog -v --base64-output=DECODE-ROWS log_file
1144 ...
1145 # at 218
1146 #080828 15:03:08 server id 1 end_log_pos 258 Write_rows: table id 17 flags: STMT_END_F
1147 ### INSERT INTO test.t
1148 ### SET
1149 ### @1=1
1150 ### @2='apple'
1151 ### @3=NULL
1152 ...
1153 # at 302
1154 #080828 15:03:08 server id 1 end_log_pos 356 Update_rows: table id 17 flags: STMT_END_F
1155 ### UPDATE test.t
1156 ### WHERE
1157 ### @1=1
1158 ### @2='apple'
1159 ### @3=NULL
1160 ### SET
1161 ### @1=1
1162 ### @2='pear'
1163 ### @3='2009:01:01'
1164 ...
1165 # at 400
1166 #080828 15:03:08 server id 1 end_log_pos 442 Delete_rows: table id 17 flags: STMT_END_F
1167 ### DELETE FROM test.t
1168 ### WHERE
1169 ### @1=1
1170 ### @2='pear'
1171 ### @3='2009:01:01'
1172 Note
1175 You should not suppress BINLOG statements if you intend to
1176 re-execute mysqlbinlog output.
1177 The SQL statements produced by --verbose for row events are much more
1179 readable than the corresponding BINLOG statements. However, they do not
1180 correspond exactly to the original SQL statements that generated the
1181 events. The following limitations apply:
1182 • The original column names are lost and replaced by @N, where N is a
1184 column number.
1185 • Character set information is not available in the binary log, which
1187 affects string column display:
1188 • There is no distinction made between corresponding binary and
1190 nonbinary string types (BINARY and CHAR, VARBINARY and VARCHAR,
1191 BLOB and TEXT). The output uses a data type of STRING for
1192 fixed-length strings and VARSTRING for variable-length strings.
1193 • For multibyte character sets, the maximum number of bytes per
1195 character is not present in the binary log, so the length for
1196 string types is displayed in bytes rather than in characters.
1197 For example, STRING(4) is used as the data type for values from
1198 either of these column types:
1199 CHAR(4) CHARACTER SET latin1
1201 CHAR(2) CHARACTER SET ucs2
1202 • Due to the storage format for events of type UPDATE_ROWS_EVENT,
1204 UPDATE statements are displayed with the WHERE clause preceding
1205 the SET clause.
1206 Proper interpretation of row events requires the information from the
1208 format description event at the beginning of the binary log. Because
1209 mysqlbinlog does not know in advance whether the rest of the log
1210 contains row events, by default it displays the format description
1211 event using a BINLOG statement in the initial part of the output.
1212 If the binary log is known not to contain any events requiring a BINLOG
1214 statement (that is, no row events), the --base64-output=NEVER option
1215 can be used to prevent this header from being written.
1216
1218 By default, mysqlbinlog reads binary log files and displays their
1219 contents in text format. This enables you to examine events within the
1220 files more easily and to re-execute them (for example, by using the
1221 output as input to mysql). mysqlbinlog can read log files directly
1222 from the local file system, or, with the --read-from-remote-server
1223 option, it can connect to a server and request binary log contents from
1224 that server. mysqlbinlog writes text output to its standard output, or
1225 to the file named as the value of the --result-file=file_name option if
1226 that option is given.
1227 • mysqlbinlog Backup Capabilities
1229 • mysqlbinlog Backup Options
1231 • Static and Live Backups
1233 • Output File Naming
1235 • Example: mysqldump + mysqlbinlog for Backup and Restore
1237 • mysqlbinlog Backup Restrictions
1239 mysqlbinlog Backup Capabilities
1240 mysqlbinlog can read binary log files and write new files containing
1242 the same content—that is, in binary format rather than text format.
1243 This capability enables you to easily back up a binary log in its
1244 original format. mysqlbinlog can make a static backup, backing up a
1245 set of log files and stopping when the end of the last file is reached.
1246 It can also make a continuous (“live”) backup, staying connected to the
1247 server when it reaches the end of the last log file and continuing to
1248 copy new events as they are generated. In continuous-backup operation,
1249 mysqlbinlog runs until the connection ends (for example, when the
1250 server exits) or mysqlbinlog is forcibly terminated. When the
1251 connection ends, mysqlbinlog does not wait and retry the connection,
1252 unlike a replica server. To continue a live backup after the server has
1253 been restarted, you must also restart mysqlbinlog.
1254 Important
1256 mysqlbinlog can back up both encrypted and unencrypted binary log
1257 files . However, copies of encrypted binary log files that are
1258 generated using mysqlbinlog are stored in an unencrypted format.
1259 mysqlbinlog Backup Options
1260 Binary log backup requires that you invoke mysqlbinlog with two options
1262 at minimum:
1263 • The --read-from-remote-server (or -R) option tells mysqlbinlog to
1265 connect to a server and request its binary log. (This is similar to
1266 a replica server connecting to its replication source server.)
1267 • The --raw option tells mysqlbinlog to write raw (binary) output,
1269 not text output.
1270 Along with --read-from-remote-server, it is common to specify other
1272 options: --host indicates where the server is running, and you may also
1273 need to specify connection options such as --user and --password.
1274 Several other options are useful in conjunction with --raw:
1276 • --stop-never: Stay connected to the server after reaching the end
1278 of the last log file and continue to read new events.
1279 • --connection-server-id=id: The server ID that mysqlbinlog reports
1281 when it connects to a server. When --stop-never is used, the
1282 default reported server ID is 1. If this causes a conflict with the
1283 ID of a replica server or another mysqlbinlog process, use
1284 --connection-server-id to specify an alternative server ID. See the
1285 section called “SPECIFYING THE MYSQLBINLOG SERVER ID”.
1286 • --result-file: A prefix for output file names, as described later.
1288 Static and Live Backups
1289 To back up a server's binary log files with mysqlbinlog, you must
1291 specify file names that actually exist on the server. If you do not
1292 know the names, connect to the server and use the SHOW BINARY LOGS
1293 statement to see the current names. Suppose that the statement produces
1294 this output:
1295 mysql> SHOW BINARY LOGS;
1297 +---------------+-----------+-----------+
1298 | Log_name | File_size | Encrypted |
1299 +---------------+-----------+-----------+
1300 | binlog.000130 | 27459 | No |
1301 | binlog.000131 | 13719 | No |
1302 | binlog.000132 | 43268 | No |
1303 +---------------+-----------+-----------+
1304 With that information, you can use mysqlbinlog to back up the binary
1306 log to the current directory as follows (enter each command on a single
1307 line):
1308 • To make a static backup of binlog.000130 through binlog.000132, use
1310 either of these commands:
1311 mysqlbinlog --read-from-remote-server --host=host_name --raw
1313 binlog.000130 binlog.000131 binlog.000132
1314 mysqlbinlog --read-from-remote-server --host=host_name --raw
1315 --to-last-log binlog.000130
1316 The first command specifies every file name explicitly. The second
1318 names only the first file and uses --to-last-log to read through
1319 the last. A difference between these commands is that if the server
1320 happens to open binlog.000133 before mysqlbinlog reaches the end of
1321 binlog.000132, the first command does not read it, but the second
1322 command does.
1323 • To make a live backup in which mysqlbinlog starts with
1325 binlog.000130 to copy existing log files, then stays connected to
1326 copy new events as the server generates them:
1327 mysqlbinlog --read-from-remote-server --host=host_name --raw
1329 --stop-never binlog.000130
1330 With --stop-never, it is not necessary to specify --to-last-log to
1332 read to the last log file because that option is implied.
1333 Output File Naming
1334 Without --raw, mysqlbinlog produces text output and the --result-file
1336 option, if given, specifies the name of the single file to which all
1337 output is written. With --raw, mysqlbinlog writes one binary output
1338 file for each log file transferred from the server. By default,
1339 mysqlbinlog writes the files in the current directory with the same
1340 names as the original log files. To modify the output file names, use
1341 the --result-file option. In conjunction with --raw, the --result-file
1342 option value is treated as a prefix that modifies the output file
1343 names.
1344 Suppose that a server currently has binary log files named
1346 binlog.000999 and up. If you use mysqlbinlog --raw to back up the
1347 files, the --result-file option produces output file names as shown in
1348 the following table. You can write the files to a specific directory by
1349 beginning the --result-file value with the directory path. If the
1350 --result-file value consists only of a directory name, the value must
1351 end with the pathname separator character. Output files are overwritten
1352 if they exist.
1353 ┌─────────────────────┬────────────────────────────┐
1355 │--result-file Option │ Output File Names │
1356 ├─────────────────────┼────────────────────────────┤
1357 │--result-file=x │ xbinlog.000999 and up │
1358 ├─────────────────────┼────────────────────────────┤
1359 │--result-file=/tmp/ │ /tmp/binlog.000999 and up │
1360 ├─────────────────────┼────────────────────────────┤
1361 │--result-file=/tmp/x │ /tmp/xbinlog.000999 and up │
1362 └─────────────────────┴────────────────────────────┘
1363 Example: mysqldump + mysqlbinlog for Backup and Restore
1364 The following example describes a simple scenario that shows how to use
1366 mysqldump and mysqlbinlog together to back up a server's data and
1367 binary log, and how to use the backup to restore the server if data
1368 loss occurs. The example assumes that the server is running on host
1369 host_name and its first binary log file is named binlog.000999. Enter
1370 each command on a single line.
1371 Use mysqlbinlog to make a continuous backup of the binary log:
1373 mysqlbinlog --read-from-remote-server --host=host_name --raw
1375 --stop-never binlog.000999
1376 Use mysqldump to create a dump file as a snapshot of the server's data.
1378 Use --all-databases, --events, and --routines to back up all data, and
1379 --master-data=2 to include the current binary log coordinates in the
1380 dump file.
1381 mysqldump --host=host_name --all-databases --events --routines --master-data=2> dump_file
1383 Execute the mysqldump command periodically to create newer snapshots as
1385 desired.
1386 If data loss occurs (for example, if the server unexpectedly exits),
1388 use the most recent dump file to restore the data:
1389 mysql --host=host_name -u root -p < dump_file
1391 Then use the binary log backup to re-execute events that were written
1393 after the coordinates listed in the dump file. Suppose that the
1394 coordinates in the file look like this:
1395 -- CHANGE MASTER TO MASTER_LOG_FILE='binlog.001002', MASTER_LOG_POS=27284;
1397 If the most recent backed-up log file is named binlog.001004,
1399 re-execute the log events like this:
1400 mysqlbinlog --start-position=27284 binlog.001002 binlog.001003 binlog.001004
1402 | mysql --host=host_name -u root -p
1403 You might find it easier to copy the backup files (dump file and binary
1405 log files) to the server host to make it easier to perform the restore
1406 operation, or if MySQL does not allow remote root access. mysqlbinlog
1407 Backup Restrictions
1408 Binary log backups with mysqlbinlog are subject to these restrictions:
1410 • mysqlbinlog does not automatically reconnect to the MySQL server if
1412 the connection is lost (for example, if a server restart occurs or
1413 there is a network outage).
1414 • The delay for a backup is similar to the delay for a replica
1416 server.
1417
1419 When invoked with the --read-from-remote-server option, mysqlbinlog
1420 connects to a MySQL server, specifies a server ID to identify itself,
1421 and requests binary log files from the server. You can use mysqlbinlog
1422 to request log files from a server in several ways:
1423 • Specify an explicitly named set of files: For each file,
1425 mysqlbinlog connects and issues a Binlog dump command. The server
1426 sends the file and disconnects. There is one connection per file.
1427 • Specify the beginning file and --to-last-log: mysqlbinlog connects
1429 and issues a Binlog dump command for all files. The server sends
1430 all files and disconnects.
1431 • Specify the beginning file and --stop-never (which implies
1433 --to-last-log): mysqlbinlog connects and issues a Binlog dump
1434 command for all files. The server sends all files, but does not
1435 disconnect after sending the last one.
1436 With --read-from-remote-server only, mysqlbinlog connects using a
1438 server ID of 0, which tells the server to disconnect after sending the
1439 last requested log file.
1440 With --read-from-remote-server and --stop-never, mysqlbinlog connects
1442 using a nonzero server ID, so the server does not disconnect after
1443 sending the last log file. The server ID is 1 by default, but this can
1444 be changed with --connection-server-id.
1445 Thus, for the first two ways of requesting files, the server
1447 disconnects because mysqlbinlog specifies a server ID of 0. It does not
1448 disconnect if --stop-never is given because mysqlbinlog specifies a
1449 nonzero server ID.
1450
1452 Copyright © 1997, 2021, Oracle and/or its affiliates.
1453 This documentation is free software; you can redistribute it and/or
1455 modify it only under the terms of the GNU General Public License as
1456 published by the Free Software Foundation; version 2 of the License.
1457 This documentation is distributed in the hope that it will be useful,
1459 but WITHOUT ANY WARRANTY; without even the implied warranty of
1460 MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
1461 General Public License for more details.
1462 You should have received a copy of the GNU General Public License along
1464 with the program; if not, write to the Free Software Foundation, Inc.,
1465 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA or see
1466 http://www.gnu.org/licenses/.
1467
1470 1. MySQL Internals: The Binary Log
1471 https://dev.mysql.com/doc/internals/en/binary-log.html
1472
1474 For more information, please refer to the MySQL Reference Manual, which
1475 may already be installed locally and which is also available online at
1476 http://dev.mysql.com/doc/.
1477
1479 Oracle Corporation (http://dev.mysql.com/).
1480MySQL 8.0 09/04/2021 MYSQLBINLOG(1)