1NVME-ID-NS(1) NVMe Manual NVME-ID-NS(1)
2
3
4
6 nvme-show-regs - Reads and shows the defined NVMe controller registers
7 for NVMe over PCIe or the controller properties for NVMe over Fabrics.
8
10 nvme show-regs <device> [--human-readable | -H]
11 [--output-format=<FMT> | -o <FMT>]
12
14 For the NVMe over PCIe device given, sends an identify namespace
15 command and provides the result and returned structure. For the NVMe
16 over Fabrics device given, sends a fabric command and provides the
17 result and returned structure.
18
19 The <device> parameter is mandatory and must be the nvme admin
20 character device (ex: /dev/nvme0). For NVMe over PCIe, the program uses
21 knowledge of the sysfs layout to map the device to the pci resource
22 stored there and mmaps the memory to get access to the registers. For
23 NVMe over Fabrics, the programs sends a fabric command to get the
24 properties of the target NVMe controller. Only the supported properties
25 are displayed.
26
28 -H, --human-readable
29 Display registers or supported properties in human readable format.
30
31 -o <format>, --output-format=<format>
32 Set the reporting format to normal, json, or binary. Only one
33 output format can be used at a time.
34
36 · Show the NVMe over PCIe controller registers or the NVMe over
37 Fabric controller properties in a binary format:
38
39 # nvme show-regs /dev/nvme0 -o binary
40
41 · Show the NVMe over PCIe controller registers or the NVMe over
42 Fabric controller properties in a human readable format:
43
44 # nvme show-regs /dev/nvme0 -H
45
46 · Show the NVMe over PCIe controller registers or NVMe-oF controller
47 properties in a json format:
48
49 # nvme show-regs /dev/nvme0 -o json
50
52 Part of the nvme-user suite
53
54
55
56NVMe 04/24/2020 NVME-ID-NS(1)