1QMI-NETWORK(1)                   User Commands                  QMI-NETWORK(1)
2
3
4

NAME

6       qmi-network - Simple network management of QMI devices
7

SYNOPSIS

9       qmi-network [OPTIONS] [DEVICE] [COMMAND]
10

DESCRIPTION

12       Simple network management of QMI devices
13
14   Commands:
15       start  Start network connection
16
17       stop   Stop network connection
18
19       status Query network connection status
20

OPTIONS

22       --profile=[PATH]
23              Use the profile in the specified path
24
25       --help Show help options
26
27       --version
28              Show version
29
30       Notes:
31
32              1)  [DEVICE]  is given as the full path to the cdc-wdm character
33              device, e.g.:
34
35              /dev/cdc-wdm0
36
37              2) The qmi-network script requires a profile to work. Unless ex‐
38              plicitly  specified  with `--profile', the file is assumed to be
39              available in the following path:
40
41              /etc/qmi-network.conf
42
43              3) The APN to use should be configured in the  profile,  in  the
44              following way (e.g. assuming APN is called 'internet'):
45
46              APN=internet
47
48              4)  Optional  APN user/password strings may be given in the fol‐
49              lowing way:
50
51              APN_USER=user APN_PASS=password
52
53              5) Optional IP_TYPE strings may be given in the following way:
54
55              IP_TYPE=[4|6]
56
57              6) If you want to instruct the qmi-network  script  to  use  the
58              qmi-proxy setup, you can do so by configuring the following line
59              in the profile:
60
61              PROXY=yes
62
63              7) To instruct the qmi-network script to use an already existing
64              Profile ID, or to create a new one on the fly, use the following
65              configuration in the profile:
66
67       PROFILE=number
68              # to use the profile-id number
69
70       PROFILE=auto
71              # to create a temporary profile on the fly
72
73              8) Once the qmi-network script reports a  successful  connection
74              you  still need to run a DHCP client on the associated WWAN net‐
75              work interface.
76

78       Copyright © 2013-2021 Aleksander Morgado License GPLv2+: GNU  GPL  ver‐
79       sion 2 or later <http://gnu.org/licenses/gpl-2.0.html>
80       This  is  free  software:  you  are free to change and redistribute it.
81       There is NO WARRANTY, to the extent permitted by law.
82

SEE ALSO

84       The full documentation for qmi-network is maintained as a Texinfo  man‐
85       ual.   If  the  info and qmi-network programs are properly installed at
86       your site, the command
87
88              info qmi-network
89
90       should give you access to the complete manual.
91
92
93
94qmi-network 1.30.2              September 2021                  QMI-NETWORK(1)
Impressum