1Ezmap_params(3NCARG) NCAR GRAPHICS Ezmap_params(3NCARG)
2
6 Ezmap_params - This document briefly describes all internal parameters
7 of EZMAP.
8
10 EZMAP has a large group of internal parameters, each of which affects
11 the behavior of one or more of the EZMAP routines. The current values
12 of the internal parameters may be retrieved using the routines MAPGTC,
13 MAPGTI, MAPGTL, and MAPGTR. The values of most of the internal
14 parameters may be reset using the routines MAPSTC, MAPSTI, MAPSTL, and
15 MAPSTR; some of the parameters are intended for retrieval only and may
16 not be given new values in this way.
17 Parameter descriptions, in alphabetical order, of all EZMAP internal
19 parameters follow. Each description begins with a line giving the
20 parameter name and the intrinsic FORTRAN type of the parameter.
21 'AR' - Character
23 For retrieval only. The value of the map limits specifier JLTS
24 from the last call to MAPSET. The default value is 'MA'.
25 'Cn' - Integer
27 The character "n" is a digit between 1 and 8. Each 'Cn', if zero
28 or greater, specifies the color index of some part of the map.
29 The user must do the calls to GKS routines to define the color
30 indices. All default values are -1s, indicating no change in
31 color index from one part of the map to another.
32 'C1' - Integer
34 Color index for perimeter. See 'Cn', above.
35 'C2' - Integer
37 Color index for grid. See 'Cn', above.
38 'C3' - Integer
40 Color index for labels. See 'Cn', above.
41 'C4' - Integer
43 Color index for limb lines. See 'Cn', above.
44 'C5' - Integer
46 Color index for continent outlines. See 'Cn', above.
47 'C6' - Integer
49 Color index for U.S. state outlines. See 'Cn', above.
50 'C7' - Integer
52 Color index for outlines of countries of the world.
53 'C8' - Integer
55 Color index for outlines of counties of the world. See 'Cn',
56 above.
57 'DA' - Integer
59 Dashed-line pattern for the grids. A 16-bit quantity. The
60 default is 21845 (octal 52525 or binary 0101010101010101).
61 'DD' - Integer or Real
63 Distance between dots along a dotted line drawn by MAPIT. The
64 default value is 12 (out of 4096; see 'RE', below).
65 'DL' - Integer or Logical
67 If true (non-zero), user calls to MAPIT draw dotted lines. The
68 default is false (zero); lines drawn by MAPIT are solid or
69 dashed, depending on the current state of the Dashline package.
70 'DL' may be reset by a user version of MAPUSR or MPCHLN to
71 change the way in which the perimeter, the grid, the limb lines,
72 and the outlines are drawn.
73 'DO' - Integer or Logical
75 If true (non-zero), outlines are dotted. The default is false
76 (zero); outlines are solid.
77 'EL' - Integer or Logical
79 If true (non-zero), only that part of the map which falls inside
80 an ellipse inscribed within the normal rectangular perimeter is
81 drawn. This is particularly appropriate for use with azimuthal
82 projections and angular limits specifying a square, in which
83 case the ellipse becomes a circle, but it will work for any map.
84 The default value is false (zero).
85 'GD' - Real
87 The distance between points used to draw the grid, in degrees.
88 The default value is 1.; user values must fall between 0.001 and
89 10.0.
90 'GP' - Integer or Real
92 Specifies the way in which the grid, if drawn, is to be modified
93 near the poles on projections which map the poles into single
94 points; 'GP' is given a value of the form "1000*GLAT+GLON",
95 where GLAT is an integer between 0 and 90 and GLON is a positive
96 real between 0 and 360.
97 If GLAT is zero, all the latitude lines of the grid are drawn;
99 if GLAT is non-zero, latitude lines at latitudes from GLAT to
100 90, inclusive (South or North) are omitted.
101 If GLON is zero, no longitude lines are drawn near the poles; if
103 GLON is non-zero, only longitude lines of the grid at multiples
104 of GLON are drawn near the poles.
105 Examples: "'GP'=0" says "draw all the latitude lines of the
107 grid; omit longitude lines of the grid near the poles."
108 "'GP'=1" says "draw entire grid." "'GP'=75045" says "suppress
109 latitude lines of the grid above 75N and below 75S; near the
110 poles, draw the longitude lines of the grid only at multiples of
111 45 degrees." The default is "'GP'=90", which says "draw all
112 latitude lines of the grid; near the poles, omit longitude lines
113 of the grid except those at multiples of 90 degrees".
114 'GR' - Integer or Real
116 The desired grid spacing, in degrees. (Note that, when 'GT'
117 and/or 'GN' have values greater than zero, they are used in
118 place of 'GR'.) Giving 'GR' a value less than or equal to zero
119 suppresses the grid. The default value of 'GR' is 10 degrees.
120 'GT' and 'GN' - Integer or Real
122 The desired spacings of latitude and longitude grid lines,
123 respectively (in degrees); if either is less than or equal to
124 zero, the value of 'GR' is used instead.
125 'G1' - Integer
127 The group identifier to be used by MAPBLA or MPLNAM when putting
128 into the area map the group of edges that define the division of
129 the plotter frame into the projected images of geographic
130 entities.
131 'G2' - Integer
133 The group identifier to be used by MAPBLA or MPLNAM when putting
134 into the area map the group of edges that define the division of
135 the plotter frame into vertical strips.
136 'IN' - Integer or Logical
138 For retrieval only. Initialization flag. If true (non-zero), it
139 says that EZMAP is in need of initialization (by a CALL MAPINT).
140 The default value is true (non-zero).
141 'LA' - Integer or Logical
143 If true (non-zero), label the meridians and the poles. The
144 default is true (non-zero).
145 'LS' - Integer
147 Controls label size. A character width, to be used in a call to
148 PWRIT. The default value is 1, which gives a character width of
149 12 plotter units.
150 'MV' - Integer or Real
152 Minimum vector length for MAPIT. A point closer to the previous
153 point than this is omitted. The default value is 4 (out of 4096;
154 see 'RE', below).
155 'OU' - Character
157 Says which set of outline data are be used by MAPLOT, MAPBLA,
158 and MAPBLM. The possible values are 'NO' (no outlines), 'CO'
159 (continental outlines), 'US' (U.S. state outlines), 'PS'
160 (continental outlines plus international outlines plus U.S.
161 outlines), and 'PO' (continental outlines plus international
162 outlines). Default is 'CO'.
163 'PE' - Integer or Logical
165 If true (non-zero), draw the perimeter. The default is true
166 (non-zero).
167 'PN' - Integer or Real
169 For retrieval only. The value of PLON from the last call to
170 MAPROJ. The default value is zero.
171 'PR' - Character
173 For retrieval only. The value of the projection specifier JPRJ
174 from the last call to MAPROJ. The default value is 'CE'.
175 'PT' - Integer or Real
177 For retrieval only. The value of PLAT from the last call to
178 MAPROJ. The default value is zero.
179 'Pn' - Integer or Real
181 For retrieval only. The character "n" is a digit from 1 to 8,
182 inclusive. Retrieves values from the call to MAPSET. P1 through
183 P4 specify PLM1(1), PLM2(1), PLM3(1), and PLM4(1), while P5
184 through P8 specify PLM1(2), PLM2(2), PLM3(2), and PLM4(2).
185 Default values are all zero.
186 'RE' - Integer or Real
188 The width of the target plotter, in plotter units. The default
189 value is 4096.
190 'RO' - Integer or Real
192 For retrieval only. The value of ROTA from the last call to
193 MAPROJ. The default value is zero.
194 'SA' - Integer or Real
196 If 'SA' is greater than 1., a satellite-view projection replaces
197 the orthographic. The value is the distance of the satellite
198 from the center of the earth, in multiples of the earth's
199 radius. The default value is zero. See also 'S1' and 'S2',
200 below.
201 'S1' and 'S2' - Integer or Real
203 Used only when 'SA' is greater than 1. Both are angles, in
204 degrees. 'S1' measures the angle between the line to the center
205 of the earth and the line of sight (to which the projection
206 plane is perpendicular). If 'S1' is zero, the projection shows
207 the earth as seen by a satellite looking straight down; call
208 this the "basic view". If 'S1' is non-zero, 'S2' measures the
209 angle from the positive u axis of the basic view to the line OP,
210 where O is the origin of the basic view and P is the projection
211 of the desired line of sight on the basic view. 'S2' is positive
212 if measured counter-clockwise.
213 'SR' - Real
215 A search radius, in degrees, used by MAPINT in finding the
216 latitude/longitude range of a map. The default value is 1.; user
217 values must lie between 0.001 and 10.0. Should not be changed
218 except by advice of a consultant.
219 'VS' - Integer
221 The vertical-stripping parameter, which determines whether
222 MAPBLA and MPLNAM put into the area map edge group 'G2',
223 defining a set of vertical strips. A negative or zero value of
224 'VS' prevents MAPBLA and MPLNAM from doing this. A value greater
225 than zero requests that it be done and specifies the number of
226 vertical strips to be created. The default value of 'VS' is 1.
227 'XL', 'XR', 'YB', and 'YT' - Real
229 For retrieval only. The parameters XLOW, XROW, YBOW, and YTOW
230 from the last call to MAPPOS. Defaults are 0.05, 0.95, 0.05, and
231 0.95, respectively.
232
234 Online: mapgtc, mapgti, mapgtl, mapgtr, mappos, maproj, maprst, mapsav,
235 mapset, mapstc, mapsti, mapstl, mapstr, mpchln, mpfnme, mpgetc, mpgeti,
236 mpgetl, mpgetr, mpglty, mpiaty, mpifnb, mpilnb, mpiola, mpiosa, mpipai,
237 mpipan, mpipar, mpisci, mplnam, mplndm, mplndr, mplnri, mpname, mprset,
238 mpsetc, mpseti, mpsetl, mpsetr,
239 Hardcopy: NCAR Graphics Contouring and Mapping Tutorial
241
243 Copyright (C) 1987-2009
244 University Corporation for Atmospheric Research
245 The use of this Software is governed by a License Agreement.
246UNIX March 1993 Ezmap_params(3NCARG)