1Math::PlanePath::DiamonUdsSeprirCaoln(t3r)ibuted Perl DoMcautmhe:n:tPaltainoenPath::DiamondSpiral(3)
2
3
4

NAME

6       Math::PlanePath::DiamondSpiral -- integer points around a diamond
7       shaped spiral
8

SYNOPSIS

10        use Math::PlanePath::DiamondSpiral;
11        my $path = Math::PlanePath::DiamondSpiral->new;
12        my ($x, $y) = $path->n_to_xy (123);
13

DESCRIPTION

15       This path makes a diamond shaped spiral.
16
17                       19                    3
18                     /    \
19                   20   9  18                2
20                 /    /   \   \
21               21  10   3   8  17            1
22             /    /   /   \  \   \
23           22  11   4   1---2   7  16    <- Y=0
24             \    \   \       /   /
25               23  12   5---6  15  ...      -1
26                 \   \        /   /
27                   24  13--14  27           -2
28                     \        /
29                       25--26               -3
30
31                        ^
32           -3  -2  -1  X=0  1   2   3
33
34       This is not simply the "SquareSpiral" rotated, it spirals around
35       faster, with side lengths following a pattern 1,1,1,1, 2,2,2,2,
36       3,3,3,3, etc, if the flat kink at the bottom (like N=13 to N=14) is
37       treated as part of the lower right diagonal.
38
39       Going diagonally on the sides as done here is like cutting the corners
40       of the "SquareSpiral", which is how it gets around in fewer steps than
41       the "SquareSpiral".  See "PentSpiralSkewed", "HexSpiralSkewed" and
42       "HeptSpiralSkewed" for similar cutting just 3, 2 or 1 of the corners.
43
44       N=1,5,13,25,etc on the Y negative axis is the "centred square numbers"
45       2*k*(k+1)+1.
46
47   N Start
48       The default is to number points starting N=1 as shown above.  An
49       optional "n_start" can give a different start, with the same shape etc.
50       For example to start at 0,
51
52           n_start => 0         18
53                              /   \
54                            19   8  17
55                          /   /   \   \
56                        20   9   2   7  16
57                      /   /   /   \   \   \
58                    21  10   3   0-- 1   6  15
59                      \   \   \       /   /
60                        22  11   4-- 5  14  ...
61                          \   \       /   /
62                            23  12--13  26
63                              \       /
64                                24--25
65
66       N=0,1,6,15,28,etc on the X axis is the hexagonal numbers k*(2k-1).
67       N=0,3,10,21,36,etc on the negative X axis is the hexagonal numbers of
68       the "second kind" k*(2k-1) for k<0.  Combining those two is the
69       triangular numbers 0,1,3,6,10,15,21,etc, k*(k+1)/2, on the X axis
70       alternately positive and negative.
71
72       N=0,2,8,18,etc on the Y axis is 2*squares, 2*Y^2.  N=0,4,12,24,etc on
73       the negative Y axis is 2*pronic, 2*Y*(Y+1).
74

FUNCTIONS

76       See "FUNCTIONS" in Math::PlanePath for behaviour common to all path
77       classes.
78
79       "$path = Math::PlanePath::DiamondSpiral->new ()"
80       "$path = Math::PlanePath::DiamondSpiral->new (n_start => $n)"
81           Create and return a new diamond spiral object.
82
83       "($x,$y) = $path->n_to_xy ($n)"
84           Return the X,Y coordinates of point number $n on the path.
85
86           For "$n < 1" the return is an empty list, it being considered the
87           path starts at 1.
88
89       "$n = $path->xy_to_n ($x,$y)"
90           Return the point number for coordinates "$x,$y".  $x and $y are
91           each rounded to the nearest integer, which has the effect of
92           treating each point in the path as a square of side 1, so the
93           entire plane is covered.
94
95       "($n_lo, $n_hi) = $path->rect_to_n_range ($x1,$y1, $x2,$y2)"
96           The returned range is exact, meaning $n_lo and $n_hi are the
97           smallest and biggest in the rectangle.
98

FORMULAS

100   Rectangle to N Range
101       Within each row N increases as X moves away from the Y axis, and within
102       each column similarly N increases as Y moves away from the X axis.  So
103       in a rectangle the maximum N is at one of the four corners.
104
105                     |
106           x1,y2 M---|----M x2,y2
107                 |   |    |
108              -------O---------
109                 |   |    |
110                 |   |    |
111           x1,y1 M---|----M x1,y1
112                     |
113
114       For any two columns x1 and x2 with x1<x2, the values in column x2 are
115       all bigger if x2>-x1.  This is so even when x1 and x2 are on the same
116       side of the origin, ie. both positive or both negative.
117
118       For any two rows y1 and y2, the values in the part of the row with X>0
119       are bigger if y2>=-y1, and in the part of the row with X<=0 it's
120       y2>-y1, or equivalently y2>=-y1+1.  So the biggest corner is at
121
122           max_x = (x2 > -x1             ? x2 : x1)
123           max_y = (y2 >= -y1+(max_x<=0) ? y2 : y1)
124
125       The minimum is similar but a little simpler.  In any column the minimum
126       is at Y=0, and in any row the minimum is at X=0.  So at 0,0 if that's
127       in the rectangle, or the edge on the side nearest the origin when not.
128
129           min_x = / if x2 < 0 then x2
130                   | if x1 > 0 then x1
131                   \ else           0
132
133           min_y = / if y2 < 0 then y2
134                   | if y1 > 0 then y1
135                   \ else           0
136

OEIS

138       Entries in Sloane's Online Encyclopedia of Integer Sequences related to
139       this path include
140
141           <http://oeis.org/A010751> (etc)
142
143           n_start=1
144             A130883    N on X axis, 2*n^2-n+1
145             A058331    N on Y axis, 2*n^2 + 1
146             A001105    N on column X=1, 2*n^2
147             A084849    N on X negative axis, 2*n^2+n+1
148             A001844    N on Y negative axis, centred squares 2*n^2+2n+1
149             A215471    N with >=5 primes among its 8 neighbours
150             A215468    sum 8 neighbours N
151
152             A217015    N permutation points order SquareSpiral rotate -90,
153                          value DiamondSpiral N at each
154             A217296    inverse permutation
155
156           n_start=0
157             A010751    X coordinate, runs 1 inc, 2 dec, 3 inc, etc
158             A305258    Y coordinate
159             A053616    abs(Y), runs k to 0 to k
160             A000384    N on X axis, hexagonal numbers
161             A001105    N on Y axis, 2*n^2 (and cf similar A184636)
162             A014105    N on X negative axis, second hexagonals
163             A046092    N on Y negative axis, 2*pronic
164             A003982    delta(abs(X)+abs(Y)), 1 when N on Y negative axis
165                          which is where move "outward" to next ring
166
167           n_start=-1
168             A188551    N positions of turns, from N=1 up
169             A188552      and which are primes
170

SEE ALSO

172       Math::PlanePath, Math::PlanePath::DiamondArms,
173       Math::PlanePath::AztecDiamondRings, Math::PlanePath::SquareSpiral,
174       Math::PlanePath::HexSpiralSkewed, Math::PlanePath::PyramidSides,
175       Math::PlanePath::ToothpickSpiral
176

HOME PAGE

178       <http://user42.tuxfamily.org/math-planepath/index.html>
179

LICENSE

181       Copyright 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019,
182       2020 Kevin Ryde
183
184       This file is part of Math-PlanePath.
185
186       Math-PlanePath is free software; you can redistribute it and/or modify
187       it under the terms of the GNU General Public License as published by
188       the Free Software Foundation; either version 3, or (at your option) any
189       later version.
190
191       Math-PlanePath is distributed in the hope that it will be useful, but
192       WITHOUT ANY WARRANTY; without even the implied warranty of
193       MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
194       General Public License for more details.
195
196       You should have received a copy of the GNU General Public License along
197       with Math-PlanePath.  If not, see <http://www.gnu.org/licenses/>.
198
199
200
201perl v5.34.0                      2021-07-22 Math::PlanePath::DiamondSpiral(3)
Impressum