1Mojo::IOLoop(3)       User Contributed Perl Documentation      Mojo::IOLoop(3)
2
3
4

NAME

6       Mojo::IOLoop - Minimalistic event loop
7

SYNOPSIS

9         use Mojo::IOLoop;
10
11         # Listen on port 3000
12         Mojo::IOLoop->server({port => 3000} => sub ($loop, $stream) {
13           $stream->on(read => sub ($stream, $bytes) {
14             # Process input chunk
15             say $bytes;
16
17             # Write response
18             $stream->write('HTTP/1.1 200 OK');
19           });
20         });
21
22         # Connect to port 3000
23         my $id = Mojo::IOLoop->client({port => 3000} => sub ($loop, $err, $stream) {
24           $stream->on(read => sub ($stream, $bytes) {
25             # Process input
26             say "Input: $bytes";
27           });
28
29           # Write request
30           $stream->write("GET / HTTP/1.1\x0d\x0a\x0d\x0a");
31         });
32
33         # Add a timer
34         Mojo::IOLoop->timer(5 => sub ($loop) { $loop->remove($id) });
35
36         # Start event loop if necessary
37         Mojo::IOLoop->start unless Mojo::IOLoop->is_running;
38

DESCRIPTION

40       Mojo::IOLoop is a very minimalistic event loop based on Mojo::Reactor,
41       it has been reduced to the absolute minimal feature set required to
42       build solid and scalable non-blocking clients and servers.
43
44       Depending on operating system, the default per-process and system-wide
45       file descriptor limits are often very low and need to be tuned for
46       better scalability. The "LIBEV_FLAGS" environment variable should also
47       be used to select the best possible EV backend, which usually defaults
48       to the not very scalable "select".
49
50         LIBEV_FLAGS=1    # select
51         LIBEV_FLAGS=2    # poll
52         LIBEV_FLAGS=4    # epoll (Linux)
53         LIBEV_FLAGS=8    # kqueue (*BSD, OS X)
54         LIBEV_FLAGS=64   # Linux AIO
55
56       The event loop will be resilient to time jumps if a monotonic clock is
57       available through Time::HiRes. A TLS certificate and key are also built
58       right in, to make writing test servers as easy as possible. Also note
59       that for convenience the "PIPE" signal will be set to "IGNORE" when
60       Mojo::IOLoop is loaded.
61
62       For better scalability (epoll, kqueue) and to provide non-blocking name
63       resolution, SOCKS5 as well as TLS support, the optional modules EV
64       (4.32+), Net::DNS::Native (0.15+), IO::Socket::Socks (0.64+) and
65       IO::Socket::SSL (2.009+) will be used automatically if possible.
66       Individual features can also be disabled with the "MOJO_NO_NNR",
67       "MOJO_NO_SOCKS" and "MOJO_NO_TLS" environment variables.
68
69       See "REAL-TIME WEB" in Mojolicious::Guides::Cookbook for more.
70

EVENTS

72       Mojo::IOLoop inherits all events from Mojo::EventEmitter and can emit
73       the following new ones.
74
75   finish
76         $loop->on(finish => sub ($loop) {...});
77
78       Emitted when the event loop wants to shut down gracefully and is just
79       waiting for all existing connections to be closed.
80
81   reset
82         $loop->on(reset => sub ($loop) {...});
83
84       Emitted when the event loop is reset, this usually happens after the
85       process is forked to clean up resources that cannot be shared.
86

ATTRIBUTES

88       Mojo::IOLoop implements the following attributes.
89
90   max_accepts
91         my $max = $loop->max_accepts;
92         $loop   = $loop->max_accepts(1000);
93
94       The maximum number of connections this event loop is allowed to accept,
95       before shutting down gracefully without interrupting existing
96       connections, defaults to 0. Setting the value to 0 will allow this
97       event loop to accept new connections indefinitely. Note that up to half
98       of this value can be subtracted randomly to improve load balancing
99       between multiple server processes, and to make sure that not all of
100       them restart at the same time.
101
102   max_connections
103         my $max = $loop->max_connections;
104         $loop   = $loop->max_connections(100);
105
106       The maximum number of accepted connections this event loop is allowed
107       to handle concurrently, before stopping to accept new incoming
108       connections, defaults to 1000.
109
110   reactor
111         my $reactor = $loop->reactor;
112         $loop       = $loop->reactor(Mojo::Reactor->new);
113
114       Low-level event reactor, usually a Mojo::Reactor::Poll or
115       Mojo::Reactor::EV object with a default subscriber to the event "error"
116       in Mojo::Reactor.
117
118         # Watch if handle becomes readable or writable
119         Mojo::IOLoop->singleton->reactor->io($handle => sub ($reactor, $writable) {
120           say $writable ? 'Handle is writable' : 'Handle is readable';
121         });
122
123         # Change to watching only if handle becomes writable
124         Mojo::IOLoop->singleton->reactor->watch($handle, 0, 1);
125
126         # Remove handle again
127         Mojo::IOLoop->singleton->reactor->remove($handle);
128

METHODS

130       Mojo::IOLoop inherits all methods from Mojo::EventEmitter and
131       implements the following new ones.
132
133   acceptor
134         my $server = Mojo::IOLoop->acceptor($id);
135         my $server = $loop->acceptor($id);
136         my $id     = $loop->acceptor(Mojo::IOLoop::Server->new);
137
138       Get Mojo::IOLoop::Server object for id or turn object into an acceptor.
139
140   client
141         my $id = Mojo::IOLoop->client(address => '127.0.0.1', port => 3000, sub {...});
142         my $id = $loop->client(address => '127.0.0.1', port => 3000, sub {...});
143         my $id = $loop->client({address => '127.0.0.1', port => 3000} => sub {...});
144
145       Open a TCP/IP or UNIX domain socket connection with
146       Mojo::IOLoop::Client and create a stream object (usually
147       Mojo::IOLoop::Stream), takes the same arguments as "connect" in
148       Mojo::IOLoop::Client.
149
150   is_running
151         my $bool = Mojo::IOLoop->is_running;
152         my $bool = $loop->is_running;
153
154       Check if event loop is running.
155
156   next_tick
157         my $undef = Mojo::IOLoop->next_tick(sub ($loop) {...});
158         my $undef = $loop->next_tick(sub ($loop) {...});
159
160       Execute callback as soon as possible, but not before returning or other
161       callbacks that have been registered with this method, always returns
162       "undef".
163
164         # Perform operation on next reactor tick
165         Mojo::IOLoop->next_tick(sub ($loop) {...});
166
167   one_tick
168         Mojo::IOLoop->one_tick;
169         $loop->one_tick;
170
171       Run event loop until an event occurs.
172
173         # Don't block longer than 0.5 seconds
174         my $id = Mojo::IOLoop->timer(0.5 => sub ($loop) {});
175         Mojo::IOLoop->one_tick;
176         Mojo::IOLoop->remove($id);
177
178   recurring
179         my $id = Mojo::IOLoop->recurring(3 => sub ($loop) {...});
180         my $id = $loop->recurring(0 => sub ($loop) {...});
181         my $id = $loop->recurring(0.25 => sub ($loop) {...});
182
183       Create a new recurring timer, invoking the callback repeatedly after a
184       given amount of time in seconds.
185
186         # Perform operation every 5 seconds
187         Mojo::IOLoop->recurring(5 => sub ($loop) {...});
188
189   remove
190         Mojo::IOLoop->remove($id);
191         $loop->remove($id);
192
193       Remove anything with an id, connections will be dropped gracefully by
194       allowing them to finish writing all data in their write buffers.
195
196   reset
197         Mojo::IOLoop->reset;
198         $loop->reset;
199         $loop->reset({freeze => 1});
200
201       Remove everything and stop the event loop.
202
203       These options are currently available:
204
205       freeze
206           freeze => 1
207
208         Freeze the current state of the event loop in time before resetting
209         it. This will prevent active connections from getting closed
210         immediately, which can help with many unintended side effects when
211         processes are forked. Note that this option is EXPERIMENTAL and might
212         change without warning!
213
214   server
215         my $id = Mojo::IOLoop->server(port => 3000, sub {...});
216         my $id = $loop->server(port => 3000, sub {...});
217         my $id = $loop->server({port => 3000} => sub {...});
218
219       Accept TCP/IP and UNIX domain socket connections with
220       Mojo::IOLoop::Server and create stream objects (usually
221       Mojo::IOLoop::Stream, takes the same arguments as "listen" in
222       Mojo::IOLoop::Server.
223
224         # Listen on random port
225         my $id = Mojo::IOLoop->server({address => '127.0.0.1'} => sub ($loop, $stream, $id) {...});
226         my $port = Mojo::IOLoop->acceptor($id)->port;
227
228   singleton
229         my $loop = Mojo::IOLoop->singleton;
230
231       The global Mojo::IOLoop singleton, used to access a single shared event
232       loop object from everywhere inside the process.
233
234         # Many methods also allow you to take shortcuts
235         Mojo::IOLoop->timer(2 => sub { Mojo::IOLoop->stop });
236         Mojo::IOLoop->start;
237
238         # Restart active timer
239         my $id = Mojo::IOLoop->timer(3 => sub { say 'Timeout!' });
240         Mojo::IOLoop->singleton->reactor->again($id);
241
242         # Turn file descriptor into handle and watch if it becomes readable
243         my $handle = IO::Handle->new_from_fd($fd, 'r');
244         Mojo::IOLoop->singleton->reactor->io($handle => sub ($reactor, $writable) {
245           say $writable ? 'Handle is writable' : 'Handle is readable';
246         })->watch($handle, 1, 0);
247
248   start
249         Mojo::IOLoop->start;
250         $loop->start;
251
252       Start the event loop, this will block until "stop" is called. Note that
253       some reactors stop automatically if there are no events being watched
254       anymore.
255
256         # Start event loop only if it is not running already
257         Mojo::IOLoop->start unless Mojo::IOLoop->is_running;
258
259   stop
260         Mojo::IOLoop->stop;
261         $loop->stop;
262
263       Stop the event loop, this will not interrupt any existing connections
264       and the event loop can be restarted by running "start" again.
265
266   stop_gracefully
267         Mojo::IOLoop->stop_gracefully;
268         $loop->stop_gracefully;
269
270       Stop accepting new connections and wait for already accepted
271       connections to be closed, before stopping the event loop.
272
273   stream
274         my $stream = Mojo::IOLoop->stream($id);
275         my $stream = $loop->stream($id);
276         my $id     = $loop->stream(Mojo::IOLoop::Stream->new);
277
278       Get Mojo::IOLoop::Stream object for id or turn object into a
279       connection.
280
281         # Increase inactivity timeout for connection to 300 seconds
282         Mojo::IOLoop->stream($id)->timeout(300);
283
284   subprocess
285         my $subprocess = Mojo::IOLoop->subprocess;
286         my $subprocess = $loop->subprocess;
287         my $subprocess = $loop->subprocess(sub ($subprocess) {...}, sub ($subprocess, $err, @results) {...});
288
289       Build Mojo::IOLoop::Subprocess object to perform computationally
290       expensive operations in subprocesses, without blocking the event loop.
291       Callbacks will be passed along to "run" in Mojo::IOLoop::Subprocess.
292
293         # Operation that would block the event loop for 5 seconds
294         Mojo::IOLoop->subprocess->run_p(sub {
295           sleep 5;
296           return '♥', 'Mojolicious';
297         })->then(sub (@results) {
298           say "I $results[0] $results[1]!";
299         })->catch(sub ($err) {
300           say "Subprocess error: $err";
301         });
302
303   timer
304         my $id = Mojo::IOLoop->timer(3 => sub ($loop) {...});
305         my $id = $loop->timer(0 => sub ($loop) {...});
306         my $id = $loop->timer(0.25 => sub ($loop) {...});
307
308       Create a new timer, invoking the callback after a given amount of time
309       in seconds.
310
311         # Perform operation in 5 seconds
312         Mojo::IOLoop->timer(5 => sub ($loop) {...});
313

DEBUGGING

315       You can set the "MOJO_IOLOOP_DEBUG" environment variable to get some
316       advanced diagnostics information printed to "STDERR".
317
318         MOJO_IOLOOP_DEBUG=1
319

SEE ALSO

321       Mojolicious, Mojolicious::Guides, <https://mojolicious.org>.
322
323
324
325perl v5.34.0                      2021-07-22                   Mojo::IOLoop(3)
Impressum