1SNMP::Info::CiscoStack(U3s)er Contributed Perl DocumentatSiNoMnP::Info::CiscoStack(3)
2
6 SNMP::Info::CiscoStack - SNMP Interface to data from CISCO-STACK-MIB
7
9 Max Baker
10
12 # Let SNMP::Info determine the correct subclass for you.
13 my $ciscostack = new SNMP::Info(
14 AutoSpecify => 1,
15 Debug => 1,
16 DestHost => 'myswitch',
17 Community => 'public',
18 Version => 2
19 )
20 or die "Can't connect to DestHost.\n";
21 my $class = $ciscostack->class();
23 print "SNMP::Info determined this device to fall under subclass : $class\n";
24
26 SNMP::Info::CiscoStack is a subclass of SNMP::Info that provides an
27 interface to the "CISCO-STACK-MIB". This MIB is used across the
28 Catalyst family under CatOS and IOS.
29 Use or create in a subclass of SNMP::Info. Do not use directly.
31 Inherited Classes
33 none.
34 Required MIBs
36 CISCO-STACK-MIB
37
39 $stack->broadcast()
40 ("sysBroadcast")
41 $stack->fan()
43 ("chassisFanStatus")
44 $stack->model()
46 ("chassisModel")
47 $stack->netmask()
49 ("sysNetMask")
50 $stack->ps1_type()
52 ("chassisPs1Type")
53 $stack->ps2_type()
55 ("chassisPs2Type")
56 $stack->ps1_status()
58 ("chassisPs1Status")
59 $stack->ps2_status()
61 ("chassisPs2Status")
62 $stack->serial()
64 ("chassisSerialNumberString") or ("chassisSerialNumber")
65 $stack->slots()
67 ("chassisNumSlots")
68
70 Interface Tables
71 $stack->i_physical()
72 Returns a map to IID for ports that are physical ports, not vlans,
73 etc.
74 $stack->i_type()
76 Crosses p_port() with p_type() and returns the results.
77 Overrides with "ifType" if p_type() isn't available.
79 $stack->i_duplex()
81 Returns reference to hash of iid to current link duplex setting.
82 First checks for fixed gigabit ports which are always full duplex.
84 Next, if the port is not operational and reported port duplex
85 ("portDuplex") is auto then the operational duplex can not be
86 determined. Otherwise it uses the reported port duplex
87 ("portDuplex").
88 $stack->i_duplex_admin()
90 Returns reference to hash of iid to administrative duplex setting.
91 First checks for fixed gigabit ports which are always full duplex.
93 Next checks the port administrative speed ("portAdminSpeed") which
94 if set to autonegotiate then the duplex will also autonegotiate,
95 otherwise it uses the reported port duplex ("portDuplex").
96 $stack->i_speed_admin()
98 Returns reference to hash of iid to administrative speed setting.
99 "portAdminSpeed"
101 $stack->set_i_speed_admin(speed, ifIndex)
103 Sets port speed, must be supplied with speed and port C<ifIndex>
104 Speed choices are 'auto', '10', '100', '1000'
106 Crosses $stack->p_port() with $stack->p_duplex() to
108 utilize port C<ifIndex>.
109 Example:
111 my %if_map = reverse %{$stack->interfaces()};
112 $stack->set_i_speed_admin('auto', $if_map{'FastEthernet0/1'})
113 or die "Couldn't change port speed. ",$stack->error(1);
114 $stack->set_i_duplex_admin(duplex, ifIndex)
116 Sets port duplex, must be supplied with duplex and port C<ifIndex>
117 Speed choices are 'auto', 'half', 'full'
119 Crosses $stack->p_port() with $stack->p_duplex() to
121 utilize port C<ifIndex>.
122 Example:
124 my %if_map = reverse %{$stack->interfaces()};
125 $stack->set_i_duplex_admin('auto', $if_map{'FastEthernet0/1'})
126 or die "Couldn't change port duplex. ",$stack->error(1);
127 Module table
129 This table holds configuration information for each of the blades
130 installed in the Catalyst device.
131 $stack->m_type()
133 ("moduleType")
134 $stack->m_model()
136 ("moduleModel")
137 $stack->m_serial()
139 ("moduleSerialNumber")
140 $stack->m_status()
142 ("moduleStatus")
143 $stack->m_name()
145 ("moduleName")
146 $stack->m_ports()
148 ("moduleNumPorts")
149 $stack->m_ports_status()
151 Returns a list of space separated status strings for the ports.
152 To see the status of port 4 :
154 @ports_status = split(' ', $stack->m_ports_status() );
156 $port4 = $ports_status[3];
157 ("modulePortStatus")
159 $stack->m_ports_hwver()
161 ("moduleHwVersion")
162 $stack->m_ports_fwver()
164 ("moduleFwVersion")
165 $stack->m_ports_swver()
167 ("moduleSwVersion")
168 $stack->m_ports_ip()
170 ("moduleIPAddress")
171 $stack->m_ports_sub1()
173 ("moduleSubType")
174 $stack->m_ports_sub2()
176 ("moduleSubType2")
177 Modules - Router Blades
179 $stack->m_ip()
180 ("moduleIPAddress")
181 $stack->m_sub1()
183 ("moduleSubType")
184 $stack->m_sub2()
186 ("moduleSubType2")
187 Port Entry Table ("CISCO-STACK-MIB::portTable")
189 $stack->p_name()
190 ("portName")
191 $stack->p_type()
193 ("portType")
194 $stack->p_status()
196 ("portOperStatus")
197 $stack->p_status2()
199 ("portAdditionalStatus")
200 $stack->p_speed()
202 ("portAdminSpeed")
203 $stack->p_duplex()
205 ("portDuplex")
206 $stack->p_port()
208 ("portIfIndex")
209 $stack->p_rx_flow_control()
211 Can be either "on" "off" or "disagree"
212 "Indicates the receive flow control operational status of the port.
214 If the port could not agree with the far end on a link protocol,
215 its operational status will be disagree(3)."
216 "portOperRxFlowControl"
218 $stack->p_tx_flow_control()
220 Can be either "on" "off" or "disagree"
221 "Indicates the transmit flow control operational status of the
223 port. If the port could not agree with the far end on a link
224 protocol, its operational status will be disagree(3)."
225 "portOperTxFlowControl"
227 $stack->p_rx_flow_control_admin()
229 Can be either "on" "off" or "desired"
230 "Indicates the receive flow control administrative status set on
232 the port. If the status is set to on(1), the port will require the
233 far end to send flow control. If the status is set to off(2), the
234 port will not allow far end to send flow control. If the status is
235 set to desired(3), the port will allow the far end to send the flow
236 control."
237 "portAdminRxFlowControl"
239 $stack->p_tx_flow_control_admin()
241 Can be either "on" "off" or "desired"
242 "Indicates the transmit flow control administrative status set on
244 the port. If the status is set to on(1), the port will send flow
245 control to the far end. If the status is set to off(2), the port
246 will not send flow control to the far end. If the status is set to
247 desired(3), the port will send flow control to the far end if the
248 far end supports it."
249 "portAdminTxFlowControl"
251 Port Capability Table ("CISCO-STACK-MIB::portCpbTable")
253 $stack->p_speed_admin()
254 ("portCpbSpeed")
255 $stack->p_duplex_admin()
257 ("portCpbDuplex")
258
260 $stack->munge_port_status()
261 Munges binary byte describing each port into ascii, and returns an
262 ascii list separated by spaces.
263perl v5.34.0 2021-09-13 SNMP::Info::CiscoStack(3)