1
2FENCE_AGENT(8)              System Manager's Manual             FENCE_AGENT(8)
3
4
5

NAME

7       fence_virsh - Fence agent for virsh
8

DESCRIPTION

10       fence_virsh  is an I/O Fencing agent which can be used with the virtual
11       machines managed by libvirt. It logs via ssh to a dom0  and  there  run
12       virsh command, which does all work.
13
14       By  default,  virsh needs root account to do properly work. So you must
15       allow ssh login in your sshd_config.
16
17       fence_virsh accepts options on the command line as well as from  stdin.
18       Fenced  sends  parameters  through  stdin  when  it  execs  the  agent.
19       fence_virsh can be run by itself with command line  options.   This  is
20       useful for testing and for turning outlets on or off from scripts.
21
22       Vendor URL: http://libvirt.org
23

PARAMETERS

25
26
27       -o, --action=[action]
28              Fencing action (Default Value: reboot)
29
30       -c, --command-prompt=[prompt]
31              Force  Python  regex  for command prompt (Default Value: ['\[EX‐
32              PECT\]#'])
33
34       -k, --identity-file=[filename]
35              Identity file (private key) for SSH
36
37       -4, --inet4-only
38              Forces agent to use IPv4 addresses only
39
40       -6, --inet6-only
41              Forces agent to use IPv6 addresses only
42
43       -a, --ip=[ip]
44              IP address or hostname of fencing device This parameter  is  al‐
45              ways required.
46
47       -u, --ipport=[port]
48              TCP/UDP  port  to use for connection with device (Default Value:
49              22)
50
51       -p, --password=[password]
52              Login password or passphrase
53
54       -S, --password-script=[script]
55              Script to run to retrieve password
56
57       -n, --plug=[id]
58              Physical plug number on device, UUID or  identification  of  ma‐
59              chine This parameter is always required.
60
61       -x, --ssh
62              Use SSH connection (Default Value: 1)
63
64       --ssh-options=[options]
65              SSH  options  to use (Default Value: -t '/bin/bash -c "PS1=\[EX‐
66              PECT\]# /bin/bash --noprofile --norc"')
67
68       -l, --username=[name]
69              Login name This parameter is always required.
70
71       -q, --quiet
72              Disable logging to stderr. Does not affect --verbose or --debug-
73              file or logging to syslog.
74
75       -v, --verbose
76              Verbose  mode.  Multiple  -v flags can be stacked on the command
77              line (e.g., -vvv) to increase verbosity.
78
79       --verbose-level
80              Level of debugging detail in output. Defaults to the  number  of
81              --verbose  flags  specified on the command line, or to 1 if ver‐
82              bose=1 in a  stonith  device  configuration  (i.e.,  on  stdin).
83
84
85       -D, --debug-file=[debugfile]
86              Write debug information to given file
87
88       -V, --version
89              Display version information and exit
90
91       -h, --help
92              Display help and exit
93
94       -C, --separator=[char]
95              Separator for CSV created by 'list' operation (Default Value: ,)
96
97
98       --delay=[seconds]
99              Wait X seconds before fencing  is  started  (Default  Value:  0)
100
101
102       --disable-timeout=[true/false]
103              Disable  timeout (true/false) (default: true when run from Pace‐
104              maker 2.0+)
105
106       --login-timeout=[seconds]
107              Wait X seconds for cmd prompt after  login  (Default  Value:  5)
108
109
110       --missing-as-off
111              Missing port returns OFF instead of failure
112
113       --power-timeout=[seconds]
114              Test  X  seconds  for status change after ON/OFF (Default Value:
115              20)
116
117       --power-wait=[seconds]
118              Wait X seconds after issuing ON/OFF (Default Value: 0)
119
120       --shell-timeout=[seconds]
121              Wait X seconds for cmd prompt  after  issuing  command  (Default
122              Value: 3)
123
124       --stonith-status-sleep=[seconds]
125              Sleep  X  seconds  between  status calls during a STONITH action
126              (Default Value: 1)
127
128       --retry-on=[attempts]
129              Count of attempts to retry power on  (Default  Value:  1)
130
131
132       --use-sudo
133              Use  sudo  (without  password)  when  calling 3rd party software
134
135
136       --ssh-path=[path]
137              Path to ssh binary (Default Value: /usr/bin/ssh)
138
139       --sudo-path=[path]
140              Path to sudo binary (Default Value: /usr/bin/sudo)
141
142

ACTIONS

144
145
146       on     Power on machine.
147
148       off    Power off machine.
149
150       reboot Reboot machine.
151
152       status This returns the status of the plug/virtual machine.
153
154       list   List available plugs with aliases/virtual machines if  there  is
155              support for more then one device. Returns N/A otherwise.
156
157       list-status
158              List  available  plugs  with  aliases/virtual machines and their
159              power state if it can be obtained without  additional  commands.
160
161
162       monitor
163              Check the health of fence device
164
165       metadata
166              Display the XML metadata describing this resource.
167
168       manpage
169               The operational behavior of this is not known.
170
171       validate-all
172              Validate if all required parameters are entered.
173
174

STDIN PARAMETERS

176
177
178       action Fencing action (Default Value: reboot)
179
180       command_prompt
181              Force  Python  regex  for command prompt (Default Value: ['\[EX‐
182              PECT\]#']) Obsoletes: cmd_prompt
183
184       identity_file
185              Identity file (private key) for SSH
186
187       inet4_only
188              Forces agent to use IPv4 addresses only
189
190       inet6_only
191              Forces agent to use IPv6 addresses only
192
193       ip     IP address or hostname of fencing device This parameter  is  al‐
194              ways required. Obsoletes: ipaddr
195
196       ipport TCP/UDP  port  to use for connection with device (Default Value:
197              22)
198
199       password
200              Login password or passphrase Obsoletes: passwd
201
202       password_script
203              Script to run  to  retrieve  password  Obsoletes:  passwd_script
204
205
206       plug   Physical  plug  number  on device, UUID or identification of ma‐
207              chine This parameter is always required. Obsoletes:  port
208
209
210       ssh    Use SSH connection (Default Value: 1) Obsoletes: secure
211
212       ssh_options
213              SSH  options  to use (Default Value: -t '/bin/bash -c "PS1=\[EX‐
214              PECT\]# /bin/bash --noprofile --norc"')
215
216       username
217              Login name This parameter is always required.  Obsoletes:  login
218
219
220       quiet  Disable logging to stderr. Does not affect --verbose or --debug-
221              file or logging to syslog.
222
223       verbose
224              Verbose mode. Multiple -v flags can be stacked  on  the  command
225              line (e.g., -vvv) to increase verbosity.
226
227       verbose_level
228              Level  of  debugging detail in output. Defaults to the number of
229              --verbose flags specified on the command line, or to 1  if  ver‐
230              bose=1  in  a  stonith  device  configuration  (i.e., on stdin).
231
232
233       debug_file
234              Write debug information to given file Obsoletes: debug
235
236       version
237              Display version information and exit
238
239       help   Display help and exit
240
241       separator
242              Separator for CSV created by 'list' operation (Default Value: ,)
243
244
245       delay  Wait  X  seconds  before  fencing  is started (Default Value: 0)
246
247
248       disable_timeout
249              Disable timeout (true/false) (default: true when run from  Pace‐
250              maker 2.0+)
251
252       login_timeout
253              Wait  X  seconds  for  cmd prompt after login (Default Value: 5)
254
255
256       missing_as_off
257              Missing port returns OFF instead of failure
258
259       power_timeout
260              Test X seconds for status change after  ON/OFF  (Default  Value:
261              20)
262
263       power_wait
264              Wait X seconds after issuing ON/OFF (Default Value: 0)
265
266       shell_timeout
267              Wait  X  seconds  for  cmd prompt after issuing command (Default
268              Value: 3)
269
270       stonith_status_sleep
271              Sleep X seconds between status calls  during  a  STONITH  action
272              (Default Value: 1)
273
274       retry_on
275              Count  of  attempts  to  retry power on (Default Value: 1)
276
277
278       use_sudo
279              Use sudo (without password) when calling 3rd party software  Ob‐
280              soletes: sudo
281
282       ssh_path
283              Path to ssh binary (Default Value: /usr/bin/ssh)
284
285       sudo_path
286              Path to sudo binary (Default Value: /usr/bin/sudo)
287
288
289
290fence_virsh (Fence Agent)         2009-10-20                    FENCE_AGENT(8)
Impressum