1gssproxy_selinux(8) SELinux Policy gssproxy gssproxy_selinux(8)
2
3
4
6 gssproxy_selinux - Security Enhanced Linux Policy for the gssproxy pro‐
7 cesses
8
10 Security-Enhanced Linux secures the gssproxy processes via flexible
11 mandatory access control.
12
13 The gssproxy processes execute with the gssproxy_t SELinux type. You
14 can check if you have these processes running by executing the ps com‐
15 mand with the -Z qualifier.
16
17 For example:
18
19 ps -eZ | grep gssproxy_t
20
21
22
24 The gssproxy_t SELinux type can be entered via the gssproxy_exec_t file
25 type.
26
27 The default entrypoint paths for the gssproxy_t domain are the follow‐
28 ing:
29
30 /usr/sbin/gssproxy
31
33 SELinux defines process types (domains) for each process running on the
34 system
35
36 You can see the context of a process using the -Z option to ps
37
38 Policy governs the access confined processes have to files. SELinux
39 gssproxy policy is very flexible allowing users to setup their gssproxy
40 processes in as secure a method as possible.
41
42 The following process types are defined for gssproxy:
43
44 gssproxy_t
45
46 Note: semanage permissive -a gssproxy_t can be used to make the process
47 type gssproxy_t permissive. SELinux does not deny access to permissive
48 process types, but the AVC (SELinux denials) messages are still gener‐
49 ated.
50
51
53 SELinux policy is customizable based on least access required.
54 gssproxy policy is extremely flexible and has several booleans that al‐
55 low you to manipulate the policy and run gssproxy with the tightest ac‐
56 cess possible.
57
58
59
60 If you want to allow all domains to execute in fips_mode, you must turn
61 on the fips_mode boolean. Enabled by default.
62
63 setsebool -P fips_mode 1
64
65
66
67 If you want to allow confined applications to run with kerberos, you
68 must turn on the kerberos_enabled boolean. Enabled by default.
69
70 setsebool -P kerberos_enabled 1
71
72
73
74 If you want to allow system to run with NIS, you must turn on the
75 nis_enabled boolean. Disabled by default.
76
77 setsebool -P nis_enabled 1
78
79
80
82 The SELinux process type gssproxy_t can manage files labeled with the
83 following file types. The paths listed are the default paths for these
84 file types. Note the processes UID still need to have DAC permissions.
85
86 cluster_conf_t
87
88 /etc/cluster(/.*)?
89
90 cluster_var_lib_t
91
92 /var/lib/pcsd(/.*)?
93 /var/lib/cluster(/.*)?
94 /var/lib/openais(/.*)?
95 /var/lib/pengine(/.*)?
96 /var/lib/corosync(/.*)?
97 /usr/lib/heartbeat(/.*)?
98 /var/lib/heartbeat(/.*)?
99 /var/lib/pacemaker(/.*)?
100
101 cluster_var_run_t
102
103 /var/run/crm(/.*)?
104 /var/run/cman_.*
105 /var/run/rsctmp(/.*)?
106 /var/run/aisexec.*
107 /var/run/heartbeat(/.*)?
108 /var/run/pcsd-ruby.socket
109 /var/run/corosync-qnetd(/.*)?
110 /var/run/corosync-qdevice(/.*)?
111 /var/run/corosync.pid
112 /var/run/cpglockd.pid
113 /var/run/rgmanager.pid
114 /var/run/cluster/rgmanager.sk
115
116 gssproxy_var_lib_t
117
118 /var/lib/gssproxy(/.*)?
119
120 gssproxy_var_run_t
121
122 /var/run/gssproxy.pid
123 /var/run/gssproxy.sock
124 /var/run/gssproxy.default.sock
125
126 krb5_host_rcache_t
127
128 /var/tmp/krb5_0.rcache2
129 /var/cache/krb5rcache(/.*)?
130 /var/tmp/nfs_0
131 /var/tmp/DNS_25
132 /var/tmp/host_0
133 /var/tmp/imap_0
134 /var/tmp/HTTP_23
135 /var/tmp/HTTP_48
136 /var/tmp/ldap_55
137 /var/tmp/ldap_487
138 /var/tmp/ldapmap1_0
139
140 krb5_keytab_t
141
142 /var/kerberos/krb5(/.*)?
143 /etc/krb5.keytab
144 /etc/krb5kdc/kadm5.keytab
145 /var/kerberos/krb5kdc/kadm5.keytab
146
147 root_t
148
149 /sysroot/ostree/deploy/.*-atomic/deploy(/.*)?
150 /
151 /initrd
152
153 security_t
154
155 /selinux
156
157 systemd_passwd_var_run_t
158
159 /var/run/systemd/ask-password(/.*)?
160 /var/run/systemd/ask-password-block(/.*)?
161
162 user_tmp_t
163
164 /dev/shm/mono.*
165 /var/run/user(/.*)?
166 /tmp/.ICE-unix(/.*)?
167 /tmp/.X11-unix(/.*)?
168 /dev/shm/pulse-shm.*
169 /tmp/.X0-lock
170 /tmp/hsperfdata_root
171 /var/tmp/hsperfdata_root
172 /home/[^/]+/tmp
173 /home/[^/]+/.tmp
174 /tmp/gconfd-[^/]+
175
176
178 SELinux requires files to have an extended attribute to define the file
179 type.
180
181 You can see the context of a file using the -Z option to ls
182
183 Policy governs the access confined processes have to these files.
184 SELinux gssproxy policy is very flexible allowing users to setup their
185 gssproxy processes in as secure a method as possible.
186
187 STANDARD FILE CONTEXT
188
189 SELinux defines the file context types for the gssproxy, if you wanted
190 to store files with these types in a diffent paths, you need to execute
191 the semanage command to specify alternate labeling and then use re‐
192 storecon to put the labels on disk.
193
194 semanage fcontext -a -t gssproxy_unit_file_t '/srv/mygssproxy_con‐
195 tent(/.*)?'
196 restorecon -R -v /srv/mygssproxy_content
197
198 Note: SELinux often uses regular expressions to specify labels that
199 match multiple files.
200
201 The following file types are defined for gssproxy:
202
203
204
205 gssproxy_exec_t
206
207 - Set files with the gssproxy_exec_t type, if you want to transition an
208 executable to the gssproxy_t domain.
209
210
211
212 gssproxy_unit_file_t
213
214 - Set files with the gssproxy_unit_file_t type, if you want to treat
215 the files as gssproxy unit content.
216
217
218
219 gssproxy_var_lib_t
220
221 - Set files with the gssproxy_var_lib_t type, if you want to store the
222 gssproxy files under the /var/lib directory.
223
224
225
226 gssproxy_var_run_t
227
228 - Set files with the gssproxy_var_run_t type, if you want to store the
229 gssproxy files under the /run or /var/run directory.
230
231
232 Paths:
233 /var/run/gssproxy.pid, /var/run/gssproxy.sock,
234 /var/run/gssproxy.default.sock
235
236
237 Note: File context can be temporarily modified with the chcon command.
238 If you want to permanently change the file context you need to use the
239 semanage fcontext command. This will modify the SELinux labeling data‐
240 base. You will need to use restorecon to apply the labels.
241
242
244 semanage fcontext can also be used to manipulate default file context
245 mappings.
246
247 semanage permissive can also be used to manipulate whether or not a
248 process type is permissive.
249
250 semanage module can also be used to enable/disable/install/remove pol‐
251 icy modules.
252
253 semanage boolean can also be used to manipulate the booleans
254
255
256 system-config-selinux is a GUI tool available to customize SELinux pol‐
257 icy settings.
258
259
261 This manual page was auto-generated using sepolicy manpage .
262
263
265 selinux(8), gssproxy(8), semanage(8), restorecon(8), chcon(1), sepol‐
266 icy(8), setsebool(8)
267
268
269
270gssproxy 21-11-19 gssproxy_selinux(8)