1LOSETUP(8) System Administration LOSETUP(8)
2
6 losetup - set up and control loop devices
7
9 Get info:
10 losetup [loopdev]
12 losetup -l [-a]
14 losetup -j file [-o offset]
16 Detach a loop device:
18 losetup -d loopdev ...
20 Detach all associated loop devices:
22 losetup -D
24 Set up a loop device:
26 losetup [-o offset] [--sizelimit size] [--sector-size size] [-Pr]
28 [--show] -f loopdev file
29 Resize a loop device:
31 losetup -c loopdev
33
35 losetup is used to associate loop devices with regular files or block
36 devices, to detach loop devices, and to query the status of a loop
37 device. If only the loopdev argument is given, the status of the
38 corresponding loop device is shown. If no option is given, all loop
39 devices are shown.
40 Note that the old output format (i.e., losetup -a) with comma-delimited
42 strings is deprecated in favour of the --list output format.
43 It’s possible to create more independent loop devices for the same
45 backing file. This setup may be dangerous, can cause data loss,
46 corruption and overwrites. Use --nooverlap with --find during setup to
47 avoid this problem.
48 The loop device setup is not an atomic operation when used with --find,
50 and losetup does not protect this operation by any lock. The number of
51 attempts is internally restricted to a maximum of 16. It is recommended
52 to use for example flock1 to avoid a collision in heavily parallel use
53 cases.
54
56 The size and offset arguments may be followed by the multiplicative
57 suffixes KiB (=1024), MiB (=1024*1024), and so on for GiB, TiB, PiB,
58 EiB, ZiB and YiB (the "iB" is optional, e.g., "K" has the same meaning
59 as "KiB") or the suffixes KB (=1000), MB (=1000*1000), and so on for
60 GB, TB, PB, EB, ZB and YB.
61 -a, --all
63 Show the status of all loop devices. Note that not all information
64 is accessible for non-root users. See also --list. The old output
65 format (as printed without --list) is deprecated.
66 -d, --detach loopdev...
68 Detach the file or device associated with the specified loop
69 device(s). Note that since Linux v3.7 kernel uses "lazy device
70 destruction". The detach operation does not return EBUSY error
71 anymore if device is actively used by system, but it is marked by
72 autoclear flag and destroyed later.
73 -D, --detach-all
75 Detach all associated loop devices.
76 -f, --find [file]
78 Find the first unused loop device. If a file argument is present,
79 use the found device as loop device. Otherwise, just print its
80 name.
81 --show
83 Display the name of the assigned loop device if the -f option and a
84 file argument are present.
85 -L, --nooverlap
87 Check for conflicts between loop devices to avoid situation when
88 the same backing file is shared between more loop devices. If the
89 file is already used by another device then re-use the device
90 rather than a new one. The option makes sense only with --find.
91 -j, --associated file [-o offset]
93 Show the status of all loop devices associated with the given file.
94 -o, --offset offset
96 The data start is moved offset bytes into the specified file or
97 device. The offset may be followed by the multiplicative suffixes;
98 see above.
99 --sizelimit size
101 The data end is set to no more than size bytes after the data
102 start. The size may be followed by the multiplicative suffixes; see
103 above.
104 -b, --sector-size size
106 Set the logical sector size of the loop device in bytes (since
107 Linux 4.14). The option may be used when create a new loop device
108 as well as stand-alone command to modify sector size of the already
109 existing loop device.
110 -c, --set-capacity loopdev
112 Force the loop driver to reread the size of the file associated
113 with the specified loop device.
114 -P, --partscan
116 Force the kernel to scan the partition table on a newly created
117 loop device. Note that the partition table parsing depends on
118 sector sizes. The default is sector size is 512 bytes, otherwise
119 you need to use the option --sector-size together with --partscan.
120 -r, --read-only
122 Set up a read-only loop device.
123 --direct-io[=on|off]
125 Enable or disable direct I/O for the backing file. The optional
126 argument can be either on or off. If the argument is omitted, it
127 defaults to off.
128 -v, --verbose
130 Verbose mode.
131 -l, --list
133 If a loop device or the -a option is specified, print the default
134 columns for either the specified loop device or all loop devices;
135 the default is to print info about all devices. See also --output,
136 --noheadings, --raw, and --json.
137 -O, --output column[,column]...
139 Specify the columns that are to be printed for the --list output.
140 Use --help to get a list of all supported columns.
141 --output-all
143 Output all available columns.
144 -n, --noheadings
146 Don’t print headings for --list output format.
147 --raw
149 Use the raw --list output format.
150 -J, --json
152 Use JSON format for --list output.
153 -V, --version
155 Display version information and exit.
156 -h, --help
158 Display help text and exit.
159
161 Cryptoloop is no longer supported in favor of dm-crypt. For more
162 details see cryptsetup(8).
163
165 losetup returns 0 on success, nonzero on failure. When losetup displays
166 the status of a loop device, it returns 1 if the device is not
167 configured and 2 if an error occurred which prevented determining the
168 status of the device.
169
171 Since version 2.37 losetup uses LOOP_CONFIGURE ioctl to setup a new
172 loop device by one ioctl call. The old versions use LOOP_SET_FD and
173 LOOP_SET_STATUS64 ioctls to do the same.
174
176 LOOPDEV_DEBUG=all
177 enables debug output.
178
180 /dev/loop[0..N]
181 loop block devices
182 /dev/loop-control
184 loop control device
185
187 The following commands can be used as an example of using the loop
188 device.
189 # dd if=/dev/zero of=~/file.img bs=1024k count=10
191 # losetup --find --show ~/file.img
192 /dev/loop0
193 # mkfs -t ext2 /dev/loop0
194 # mount /dev/loop0 /mnt
195 ...
196 # umount /dev/loop0
197 # losetup --detach /dev/loop0
198
200 Karel Zak <kzak@redhat.com>, based on the original version from
201 Theodore Ts’o <tytso@athena.mit.edu>.
202
204 For bug reports, use the issue tracker at
205 https://github.com/karelzak/util-linux/issues.
206
208 The losetup command is part of the util-linux package which can be
209 downloaded from Linux Kernel Archive
210 <https://www.kernel.org/pub/linux/utils/util-linux/>.
211util-linux 2.37.2 2021-06-02 LOSETUP(8)