1systemd_modules_load_seSlEiLniunxu(x8)Policy systemd_modsuylsetse_mldo_amdodules_load_selinux(8)
2
3
4

NAME

6       systemd_modules_load_selinux  -  Security Enhanced Linux Policy for the
7       systemd_modules_load processes
8

DESCRIPTION

10       Security-Enhanced Linux secures the systemd_modules_load processes  via
11       flexible mandatory access control.
12
13       The   systemd_modules_load  processes  execute  with  the  systemd_mod‐
14       ules_load_t SELinux type. You can check if  you  have  these  processes
15       running by executing the ps command with the -Z qualifier.
16
17       For example:
18
19       ps -eZ | grep systemd_modules_load_t
20
21
22

ENTRYPOINTS

24       The  systemd_modules_load_t  SELinux  type  can be entered via the sys‐
25       temd_modules_load_exec_t file type.
26
27       The default entrypoint paths for the systemd_modules_load_t domain  are
28       the following:
29
30       /usr/lib/systemd/systemd-modules-load
31

PROCESS TYPES

33       SELinux defines process types (domains) for each process running on the
34       system
35
36       You can see the context of a process using the -Z option to ps
37
38       Policy governs the access confined processes have  to  files.   SELinux
39       systemd_modules_load  policy  is  very flexible allowing users to setup
40       their systemd_modules_load processes in as secure a method as possible.
41
42       The following process types are defined for systemd_modules_load:
43
44       systemd_modules_load_t
45
46       Note: semanage permissive -a systemd_modules_load_t can be used to make
47       the  process  type  systemd_modules_load_t permissive. SELinux does not
48       deny access to permissive process types, but the AVC (SELinux  denials)
49       messages are still generated.
50
51

BOOLEANS

53       SELinux  policy  is  customizable based on least access required.  sys‐
54       temd_modules_load policy is extremely flexible and has several booleans
55       that  allow  you  to manipulate the policy and run systemd_modules_load
56       with the tightest access possible.
57
58
59
60       If you want to allow all domains to execute in fips_mode, you must turn
61       on the fips_mode boolean. Enabled by default.
62
63       setsebool -P fips_mode 1
64
65
66
67       If  you  want  to  allow  system  to run with NIS, you must turn on the
68       nis_enabled boolean. Disabled by default.
69
70       setsebool -P nis_enabled 1
71
72
73
74       If you want to disable kernel module loading, you must turn on the  se‐
75       cure_mode_insmod boolean. Enabled by default.
76
77       setsebool -P secure_mode_insmod 1
78
79
80

MANAGED FILES

82       The  SELinux  process  type systemd_modules_load_t can manage files la‐
83       beled with the following file types.  The paths listed are the  default
84       paths  for these file types.  Note the processes UID still need to have
85       DAC permissions.
86
87       cluster_conf_t
88
89            /etc/cluster(/.*)?
90
91       cluster_var_lib_t
92
93            /var/lib/pcsd(/.*)?
94            /var/lib/cluster(/.*)?
95            /var/lib/openais(/.*)?
96            /var/lib/pengine(/.*)?
97            /var/lib/corosync(/.*)?
98            /usr/lib/heartbeat(/.*)?
99            /var/lib/heartbeat(/.*)?
100            /var/lib/pacemaker(/.*)?
101
102       cluster_var_run_t
103
104            /var/run/crm(/.*)?
105            /var/run/cman_.*
106            /var/run/rsctmp(/.*)?
107            /var/run/aisexec.*
108            /var/run/heartbeat(/.*)?
109            /var/run/pcsd-ruby.socket
110            /var/run/corosync-qnetd(/.*)?
111            /var/run/corosync-qdevice(/.*)?
112            /var/run/corosync.pid
113            /var/run/cpglockd.pid
114            /var/run/rgmanager.pid
115            /var/run/cluster/rgmanager.sk
116
117       krb5_host_rcache_t
118
119            /var/tmp/krb5_0.rcache2
120            /var/cache/krb5rcache(/.*)?
121            /var/tmp/nfs_0
122            /var/tmp/DNS_25
123            /var/tmp/host_0
124            /var/tmp/imap_0
125            /var/tmp/HTTP_23
126            /var/tmp/HTTP_48
127            /var/tmp/ldap_55
128            /var/tmp/ldap_487
129            /var/tmp/ldapmap1_0
130
131       root_t
132
133            /sysroot/ostree/deploy/.*-atomic/deploy(/.*)?
134            /
135            /initrd
136
137       tracefs_t
138
139            /sys/kernel/tracing
140
141

FILE CONTEXTS

143       SELinux requires files to have an extended attribute to define the file
144       type.
145
146       You can see the context of a file using the -Z option to ls
147
148       Policy  governs  the  access  confined  processes  have to these files.
149       SELinux systemd_modules_load policy is very flexible allowing users  to
150       setup  their  systemd_modules_load  processes  in as secure a method as
151       possible.
152
153       STANDARD FILE CONTEXT
154
155       SELinux defines the file context types for the systemd_modules_load, if
156       you wanted to store files with these types in a diffent paths, you need
157       to execute the semanage command to specify alternate labeling and  then
158       use restorecon to put the labels on disk.
159
160       semanage  fcontext  -a -t systemd_modules_load_unit_file_t '/srv/mysys‐
161       temd_modules_load_content(/.*)?'
162       restorecon -R -v /srv/mysystemd_modules_load_content
163
164       Note: SELinux often uses regular expressions  to  specify  labels  that
165       match multiple files.
166
167       The following file types are defined for systemd_modules_load:
168
169
170
171       systemd_modules_load_exec_t
172
173       -  Set  files with the systemd_modules_load_exec_t type, if you want to
174       transition an executable to the systemd_modules_load_t domain.
175
176
177
178       systemd_modules_load_unit_file_t
179
180       - Set files with the systemd_modules_load_unit_file_t type, if you want
181       to treat the files as systemd modules load unit content.
182
183
184
185       Note:  File context can be temporarily modified with the chcon command.
186       If you want to permanently change the file context you need to use  the
187       semanage fcontext command.  This will modify the SELinux labeling data‐
188       base.  You will need to use restorecon to apply the labels.
189
190

COMMANDS

192       semanage fcontext can also be used to manipulate default  file  context
193       mappings.
194
195       semanage  permissive  can  also  be used to manipulate whether or not a
196       process type is permissive.
197
198       semanage module can also be used to enable/disable/install/remove  pol‐
199       icy modules.
200
201       semanage boolean can also be used to manipulate the booleans
202
203
204       system-config-selinux is a GUI tool available to customize SELinux pol‐
205       icy settings.
206
207

AUTHOR

209       This manual page was auto-generated using sepolicy manpage .
210
211

SEE ALSO

213       selinux(8),   systemd_modules_load(8),   semanage(8),    restorecon(8),
214       chcon(1), sepolicy(8), setsebool(8)
215
216
217
218systemd_modules_load               21-11-19    systemd_modules_load_selinux(8)
Impressum