1VLAN manipulation action in tc(8)    Linux   VLAN manipulation action in tc(8)
2
3
4

NAME

6       vlan - vlan manipulation module
7

SYNOPSIS

9       tc  ... action vlan { pop | pop_eth | PUSH | MODIFY | PUSH_ETH } [ CON‐
10               TROL ]
11
12       PUSH := push [ protocol VLANPROTO ]  [ priority VLANPRIO ] id VLANID
13
14       MODIFY := modify [ protocol VLANPROTO ]    [  priority  VLANPRIO  ]  id
15               VLANID
16
17       PUSH_ETH := push_eth dst_mac LLADDR src_mac LLADDR
18
19       CONTROL  :=  {  reclassify | pipe | drop | continue | pass | goto chain
20               CHAIN_INDEX }
21

DESCRIPTION

23       The vlan action allows to perform 802.1Q  en-  or  decapsulation  on  a
24       packet, reflected by the operation modes POP, PUSH and MODIFY.  The POP
25       mode is simple, as no further information is required to just drop  the
26       outer-most  VLAN  encapsulation.  The  PUSH and MODIFY modes require at
27       least a VLANID and allow to optionally choose the VLANPROTO to use.
28
29       The vlan action can also be used to add or  remove  the  base  Ethernet
30       header.  The  pop_eth  mode, which takes no argument, is used to remove
31       the base Ethernet header. All existing VLANs must have been  previously
32       dropped. The opposite operation, adding a base Ethernet header, is done
33       with the push_eth mode. In that case,  the  packet  must  have  no  MAC
34       header  (stacking  MAC  headers  is not permitted). This mode is mostly
35       useful when a previous action has encapsulated the whole original frame
36       behind a network header and one needs to prepend an Ethernet header be‐
37       fore forwarding the resulting packet.
38
39

OPTIONS

41       pop    Decapsulation mode, no further arguments allowed.
42
43       push   Encapsulation mode. Requires at least id option.
44
45       modify Replace mode. Existing 802.1Q tag is replaced. Requires at least
46              id option.
47
48       pop_eth
49              Ethernet header decapsulation mode. Only works on a plain Ether‐
50              net header: VLANs, if any, must be removed first.
51
52       push_eth
53              Ethernet header encapsulation mode. The Ethertype  is  automati‐
54              cally set using the network header type. Chaining Ethernet head‐
55              ers is not allowed: the packet must have no MAC header when  us‐
56              ing this mode. Requires the dst_mac and src_mac options.
57
58       id VLANID
59              Specify  the VLAN ID to encapsulate into.  VLANID is an unsigned
60              16bit integer, the format is detected automatically (e.g. prefix
61              with '0x' for hexadecimal interpretation, etc.).
62
63       protocol VLANPROTO
64              Choose  the  VLAN  protocol  to use. At the time of writing, the
65              kernel accepts only 802.1Q or 802.1ad.
66
67       priority VLANPRIO
68              Choose the VLAN priority to use. Decimal number in range of 0-7.
69
70       dst_mac LLADDR
71              Choose the destination MAC address to use.
72
73       src_mac LLADDR
74              Choose the source MAC address to use.
75
76       CONTROL
77              How to continue after executing this action.
78
79              reclassify
80                     Restarts classification by jumping back to the first fil‐
81                     ter attached to this action's parent.
82
83              pipe   Continue with the next action, this is the default.
84
85              drop   Packet will be dropped without running further actions.
86
87              continue
88                     Continue classification with next filter in line.
89
90              pass   Return  to calling qdisc for packet processing. This ends
91                     the classification process.
92

EXAMPLES

94       The following example encapsulates incoming ICMP packets on  eth0  from
95       10.0.0.2 into VLAN ID 123:
96
97              #tc qdisc add dev eth0 handle ffff: ingress
98              #tc filter add dev eth0 parent ffff: pref 11 protocol ip \
99                   u32 match ip protocol 1 0xff flowid 1:1 \
100                       match ip src 10.0.0.2 flowid 1:1 \
101                   action vlan push id 123
102
103       Here  is  an example of the pop function: Incoming VLAN packets on eth0
104       are decapsulated and the classification process then restarted for  the
105       plain packet:
106
107              #tc qdisc add dev eth0 handle ffff: ingress
108              #tc filter add dev $ETH parent ffff: pref 1 protocol 802.1Q \
109                   u32 match u32 0 0 flowid 1:1 \
110                   action vlan pop reclassify
111
112       For an example of the pop_eth and push_eth modes, see tc-mpls(8).
113
114

SEE ALSO

116       tc(8), tc-mpls(8)
117
118
119
120iproute2                          12 Jan 2015VLAN manipulation action in tc(8)
Impressum