1Diagrams(n) Tk Diagrams Diagrams(n)
2______________________________________________________________________________
6
8 Diagrams - User documentation of the Diagrams package
9
11 package require Tcl 8.4
12 package require Tk 8.4
14 package require Diagrams 0.2
16 ::Diagrams::drawin canvas
18 ::Diagrams::saveps filename
20 ::Diagrams::direction newdir
22 ::Diagrams::currentpos pos
24 ::Diagrams::getpos anchor obj
26 ::Diagrams::position xcoord ycoord
28 ::Diagrams::box text width height
30 ::Diagrams::plaintext text width height
32 ::Diagrams::circle text radius
34 ::Diagrams::slanted text width height angle
36 ::Diagrams::diamond text width height
38 ::Diagrams::drum text width height
40 ::Diagrams::arrow text length heads
42 ::Diagrams::line args
44 ::Diagrams::attach anchor
46 ::Diagrams::color name
48 ::Diagrams::fillcolor name
50 ::Diagrams::textcolor name
52 ::Diagrams::usegap use
54 ::Diagrams::xgap value
56 ::Diagrams::ygap value
58 ::Diagrams::textfont name
60 ::Diagrams::linewidth pixels
62 ::Diagrams::linestyle style
64 ::Diagrams::pushstate
66 ::Diagrams::popstate
68 ::Diagrams::computepos
70 ::Diagrams::boxcoords x1 y1 x2 y2
72 ::Diagrams::moveobject obj
74______________________________________________________________________________
76
78 The Diagrams package is meant to help drawing diagrams, like flow‐
79 charts. The philosophy is that you should be concentrating on the con‐
80 tents of the diagram, rather than the exact positioning and sizing of
81 all items within it. The Diagrams package uses a few simple rules to
82 layout the items:
83 · Each item (or object) in the diagram has a number of "anchors" -
85 places where arrows and lines can be connected to.
86 · You can draw an arrow or a line from an object in a preset
88 direction
89 · Sizing and positioning should be done as automatic as possible:
91 this is achieved for instance by drawing boxes and circles with
92 text, rather than first drawing a rectangle and then drawing the
93 text inside it or vice versa.
94 The commands within this package can be split up in several categories.
96 Each category is described in a separate section.
97
99 ::Diagrams::drawin canvas
100 Set the canvas widget in which to draw
101 widget canvas
103 Widget to draw in
104 ::Diagrams::saveps filename
107 Save the drawing in a PostScript file
108 filename string
110 Name of the file to save the drawing in
111 ::Diagrams::direction newdir
114 Set the direction for moving the current position. The direc‐
115 tion is one of: north northeast east southeast south south‐
116 west west northwest N NE E SE S SW
117 W NW up up-right left down-right down down-left left
118 up-left centre center C
119 newdir string
121 New direction
122 ::Diagrams::currentpos pos
125 Set the current position explicitly (argument must be a position
126 "object")
127 pos list
129 New position (retrieve via getpos for instance)
130 ::Diagrams::getpos anchor obj
133 Get the position of a particular "anchor" point of an object
134 anchor should be one of the direction strings
135 anchor string
137 Name of the anchor (one of the directions - see the
138 direction command
139 obj list
141 The object in question
142 ::Diagrams::position xcoord ycoord
145 Create a position "object"
146 xcoord float
148 X-coordinate of the position
149 ycoord float
151 Y-coordinate of the position
152
154 ::Diagrams::box text width height
155 Draw a box from the current position (width and height are both
156 optional; if not given, the text determines the width and
157 height)
158 string text
160 Text to be shown inside the box
161 float width
163 Width (if any) of the box in pixels
164 float height
166 Height (if any) of the box in pixels
167 ::Diagrams::plaintext text width height
170 Draw plain text from the current position (width and height are
171 both optional; if not given, the text determines the width and
172 height)
173 string text
175 Text to be shown
176 float width
178 Width (if any) of the (invisible) box in which to posi‐
179 tion the text
180 float height
182 Height (if any) of the box
183 ::Diagrams::circle text radius
186 Draw a circle from the current position (the radius is optional)
187 string text
189 Text to be shown inside the circle
190 float radius
192 Radius (if any) of the circle in pixels
193 ::Diagrams::slanted text width height angle
196 Draw a slanted box from the current position (width, height and
197 angle are optional)
198 string text
200 Text to be shown inside the box
201 float width
203 Width (if any) of the box in pixels
204 float height
206 Height (if any) of the box in pixels
207 float angle
209 Angle of the slanted box
210 ::Diagrams::diamond text width height
213 Draw a diamond-shaped box from the current position (width and
214 height are both optional; if not given, the text determines the
215 width and height)
216 string text
218 Text to be shown inside the diamond
219 float width
221 Width (if any) of the diamond in pixels
222 float height
224 Height (if any) of the diamond in pixels
225 ::Diagrams::drum text width height
228 Draw a drumshaped item from th ecurrent position (width and
229 height are both optional; if not given, the text determines the
230 width and height)
231 string text
233 Text to be shown inside the drum
234 float width
236 Width (if any) of the drum in pixels
237 float height
239 Height (if any) of the drum in pixels
240 ::Diagrams::arrow text length heads
243 Draw an arrow from the current position to the next. The text
244 is drawn next to the arrow, the length (in pixels) is optional.
245 If not given the gap parameters are used.
246 string text
248 Text to be shown along the arrow
249 float length
251 Length of the arrow in pixels
252 float heads
254 Which arrow heads to draw (first, last or both - defaults
255 to last)
256 ::Diagrams::line args
259 Draw a line specified via positions or via line segments The
260 arguments are either position or length-angle pairs
261 list args
263 List of positions or of length-angle pairs
264
267 (Note: attributes are persistent)
268 ::Diagrams::attach anchor
270 Set the anchor point for attaching arrows to
271 string anchor
273 Any one of the valid anchor (e.g. N or North)
274 ::Diagrams::color name
277 Set the color for the outline of a box etc.
278 color name
280 Name of the colour to be used
281 ::Diagrams::fillcolor name
284 Set the color to fill the objects
285 color name
287 Name of the colour to be used
288 ::Diagrams::textcolor name
291 Set the color to draw the text in
292 color name
294 Name of the colour to be used
295 ::Diagrams::usegap use
298 Turn the gap on (1) or off (0). Note: usually a small gap is
299 used when positioning objects.
300 boolean use
302 Use the gap to compute the position of the next object or
303 not
304 ::Diagrams::xgap value
307 Size of the gap in horizontal direction (in pixels)
308 integer value
310 Gap width in pixels
311 ::Diagrams::ygap value
314 Size of the gap in vertical direction (in pixels)
315 integer value
317 Gap height in pixels
318 ::Diagrams::textfont name
321 Set the name of the font to use
322 string name
324 Name of a text font
325 ::Diagrams::linewidth pixels
328 Set the width of the lines (in line objects and arrows and the
329 outline of boxes and other objects)
330 integer pixels
332 Number of pixels the lines are wide
333 ::Diagrams::linestyle style
336 Set the style of the lines and arrows and of the outline of
337 boxes and other objects. The predefined line styles are: solid,
338 dot, dash, dash-dot, dash-dot-dot (these are the distinguishable
339 line styles on Windows). You can also use the style patterns
340 from the canvas directly.
341 string style
343 Name of a valid line style
344
347 Note: it is best to study how for instance box objects are implemented
348 first.
349 ::Diagrams::pushstate
351 Save the current global settings Used when defining an object
352 that is composed of other objects
353 ::Diagrams::popstate
355 Restore the previously saved global settings
356 ::Diagrams::computepos
358 Compute the current position
359 ::Diagrams::boxcoords x1 y1 x2 y2
361 Compute the anchor coordinates for a box-like object (this is
362 merely a convenience routine. In general, you will have to com‐
363 pute the list of coordinates yourself - see for instance the
364 diamond object)
365 float x1
367 X coordinate of upper-left corner
368 float y1
370 Y coordinate of upper-left corner
371 float x2
373 X coordinate of lower-right corner
374 float y2
376 Y coordinate of lower-right corner
377 ::Diagrams::moveobject obj
380 Move the object to the right position and return the new infor‐
381 mation
382 list obj
384 List of data representing the object
385
388 diagrams, drawing
389diagrams 0.2 Diagrams(n)