1IPMCTL-LOAD-GOAL(1)                 ipmctl                 IPMCTL-LOAD-GOAL(1)
2
3
4

NAME

6       ipmctl-load-goal - Creates a memory allocation goal request from a file
7

SYNOPSIS

9           ipmctl load [OPTIONS] -source (path) -goal [TARGETS]
10

DESCRIPTION

12       Creates a memory allocation goal request from a file onto one or more
13       PMem modules.
14
15           Note
16           Deleting the PCD can be used as a way to prepare individual PMem
17           modules for provisioning. See the delete -pcd command.
18
19           Warning
20           This command may result in data loss. Data should be backed up to
21           other storage before executing this command.
22
23           Note
24           Changing a memory allocation goal modifies how the platform
25           firmware maps persistent memory in the System Physical Address
26           space (SPA) which may result in data loss or inaccessible data, but
27           does not explicitly delete or modify user data found in persistent
28           memory.
29

OPTIONS

31       -f, -force
32              Reconfiguring PMem modules is a destructive operation which
33           requires confirmation from the user. This option suppresses the
34           confirmation. The force flag will also suppress the security
35           enabled warning as well as all other warning prompts.
36
37       -h, -help
38           Displays help for the command.
39
40       -ddrt
41           Used to specify DDRT as the desired transport protocol for the
42           current invocation of ipmctl.
43
44       -smbus
45           Used to specify SMBUS as the desired transport protocol for the
46           current invocation of ipmctl.
47
48           Note
49           The -ddrt and -smbus options are mutually exclusive and may not be
50           used together.
51
52       -lpmb
53           Used to specify large transport payload size for the current
54           invocation of ipmctl.
55
56       -spmb
57           Used to specify small transport payload size for the current
58           invocation of ipmctl.
59
60           Note
61           The -lpmb and -spmb options are mutually exclusive and may not be
62           used together.
63
64       -o (text|nvmxml), -output (text|nvmxml)
65           Changes the output format. One of: "text" (default) or "nvmxml".
66           The "nvmxml" format implies the "-force" flag.
67
68       -u (B|MB|MiB|GB|GiB|TB| TiB), -units (B|MB|MiB|GB|GiB|TB| TiB)
69           Changes the units that capacities are displayed in for this
70           command. One of: bytes (B), megabytes (MB), mebibytes (MiB),
71           gigabytes (GB), gibibytes (GiB), terabytes (TB) or tebibytes (TiB).
72

TARGETS

74       -dimm [DimmIDs]
75           Loads the memory allocation goal onto specific PMem modules by
76           supplying one or more comma separated PMem module identifiers. This
77           list must include all unconfigured PMem modules on the affected
78           sockets. The default is to load the memory allocation goal onto all
79           manageable PMem modules.
80
81       -socket [SocketIds]
82           Loads the memory allocation goal onto all manageable PMem modules
83           on specific sockets by supplying the socket target and one or more
84           comma separated socket identifiers. The default is to load the
85           memory allocation goal onto all manageable PMem modules on all
86           sockets.
87

EXAMPLES

89       Loads the configuration settings stored in "config.txt" onto all the
90       PMem modules in the system as a memory allocation goal to be applied by
91       the BIOS on the next reboot.
92
93           ipmctl load -source config.txt -goal
94
95       Loads the configuration settings stored in "config.txt" onto a
96       specified set of PMem modules as a memory allocation goal to be applied
97       by the BIOS on the next reboot.
98
99           ipmctl load -source config.txt -goal -dimm 1,2,3
100
101       Loads the configuration settings stored in "config.txt" onto all
102       manageable PMem modules on sockets 1 and 2 as a memory allocation goal
103       to be applied by the BIOS on the next reboot.
104
105           ipmctl load -source config.txt -goal -socket 1,2
106

LIMITATIONS

108       In order to successfully execute this command:
109
110       •   The caller must have the appropriate privileges.
111
112       •   The specified PMem modules must be manageable by the host software
113           and must all have the same SKU.
114
115       •   SKU based maximum total mapped memory is enforced. See section
116           [Maximum Mapped Memory Limiting].
117
118       •   Existing memory allocation goals that have not been applied and any
119           namespaces associated with the requested PMem modules must be
120           deleted before running this command.
121
122       •   Goal requests may not be applied by platform firmware (BIOS) if the
123           PMem module is in security enabled, locked state.
124
125           Note
126           It is recommended to disable security prior to reboot if requesting
127           a new goal.
128
129           Note
130           A goal request may be initiated even if a target PMem module is in
131           security state enabled, but care must be taken to ensure the PMem
132           module is in either unlocked or disabled security state prior to
133           the platform firmware (BIOS) provisioning flow following a reboot.
134           In addition, a warning will be presented to the user: WARNING: Goal
135           will not be applied unless security is disabled prior to platform
136           firmware (BIOS) provisioning!
137
138       •   Changing the memory configuration is a destructive operation which
139           results in loss of data stored in the persistent memory region.
140           Therefore, data should be backed up to other storage before
141           executing this command. Targets may be limited to individual PMem
142           modules or sockets, but all PMem modules on affected sockets must
143           be configured when the command finishes. If the selected targets
144           make this impossible, the command will be rejected. Refer to Show
145           System Capabilities for a list of BIOS supported modes.
146
147          Some requests are dependent on BIOS and/or platform configuration.
148           For details, refer to the Intel® Optane™ Persistent Memory Software
149           Memory Allocation Rules, document number 564194. For example:
150
151          Provisioning PMem modules for Memory Mode while BIOS is configured
152           for 1LM only will result in unused capacity.
153
154          Provisioning PMem modules for Memory Mode while not all iMCs have
155           at least one PMem module will result in unused capacity.
156

RETURN DATA

158       If successful, the CLI will display the memory allocation goal stored
159       on each PMem module as documented in the command Section [Show Memory
160       Allocation Goal]. If a failure occurs, an error code and message will
161       be displayed. If a failure occurs when configuring multiple PMem
162       modules, the process will exit and remove the memory allocation goal
163       from any PMem modules that succeeded prior to the failure.
164
165
166
167ipmctl                            2022-02-01               IPMCTL-LOAD-GOAL(1)
Impressum