1LDAPCOMPARE(1) General Commands Manual LDAPCOMPARE(1)
2
6 ldapcompare - LDAP compare tool
7
9 ldapcompare [-V[V]] [-d debuglevel] [-n] [-v] [-z] [-M[M]] [-x]
10 [-D binddn] [-W] [-w passwd] [-y passwdfile] [-H ldapuri] [-P {2|3}]
11 [-e [!]ext[=extparam]] [-E [!]ext[=extparam]] [-o opt[=optparam]]
12 [-O security-properties] [-I] [-Q] [-N] [-U authcid] [-R realm] [-X au‐
13 thzid] [-Y mech] [-Z[Z]] DN {attr:value | attr::b64value}
14
16 ldapcompare is a shell-accessible interface to the ldap_compare_ext(3)
17 library call.
18 ldapcompare opens a connection to an LDAP server, binds, and performs a
20 compare using specified parameters. The DN should be a distinguished
21 name in the directory. Attr should be a known attribute. If followed
22 by one colon, the assertion value should be provided as a string. If
23 followed by two colons, the base64 encoding of the value is provided.
24 The result code of the compare is provided as the exit code and, unless
25 ran with -z, the program prints TRUE, FALSE, or UNDEFINED on standard
26 output.
27
29 -V[V] Print version info. If -VV is given, only the version informa‐
30 tion is printed.
31 -d debuglevel
33 Set the LDAP debugging level to debuglevel. ldapcompare must be
34 compiled with LDAP_DEBUG defined for this option to have any ef‐
35 fect.
36 -n Show what would be done, but don't actually perform the compare.
38 Useful for debugging in conjunction with -v.
39 -v Run in verbose mode, with many diagnostics written to standard
41 output.
42 -z Run in quiet mode, no output is written. You must check the re‐
44 turn status. Useful in shell scripts.
45 -M[M] Enable manage DSA IT control. -MM makes control critical.
47 -x Use simple authentication instead of SASL.
49 -D binddn
51 Use the Distinguished Name binddn to bind to the LDAP directory.
52 For SASL binds, the server is expected to ignore this value.
53 -W Prompt for simple authentication. This is used instead of spec‐
55 ifying the password on the command line.
56 -w passwd
58 Use passwd as the password for simple authentication.
59 -y passwdfile
61 Use complete contents of passwdfile as the password for simple
62 authentication. Note that complete means that any leading or
63 trailing whitespaces, including newlines, will be considered
64 part of the password and, unlike other software, they will not
65 be stripped. As a consequence, passwords stored in files by
66 commands like echo(1) will not behave as expected, since echo(1)
67 by default appends a trailing newline to the echoed string. The
68 recommended portable way to store a cleartext password in a file
69 for use with this option is to use slappasswd(8) with {CLEART‐
70 EXT} as hash and the option -n.
71 -H ldapuri
73 Specify URI(s) referring to the ldap server(s); only the proto‐
74 col/host/port fields are allowed; a list of URI, separated by
75 whitespace or commas is expected.
76 -P {2|3}
78 Specify the LDAP protocol version to use.
79 -e [!]ext[=extparam]
81 -E [!]ext[=extparam]
83 Specify general extensions with -e and compare extensions with
85 -E. ´!´ indicates criticality.
86 General extensions:
88 [!]assert=<filter> (an RFC 4515 Filter)
89 !authzid=<authzid> ("dn:<dn>" or "u:<user>")
90 [!]bauthzid (RFC 3829 authzid control)
91 [!]chaining[=<resolve>[/<cont>]]
92 [!]manageDSAit
93 [!]noop
94 ppolicy
95 [!]postread[=<attrs>] (a comma-separated attribute list)
96 [!]preread[=<attrs>] (a comma-separated attribute list)
97 [!]relax
98 sessiontracking[=<username>]
99 abandon,cancel,ignore (SIGINT sends abandon/cancel,
100 or ignores response; if critical, doesn't wait for SIGINT.
101 not really controls)
102 Compare extensions:
104 !dontUseCopy
105 -o opt[=optparam]
107 Specify any ldap.conf(5) option or one of the following:
109 nettimeout=<timeout> (in seconds, or "none" or "max")
110 ldif_wrap=<width> (in columns, or "no" for no wrapping)
111 -O security-properties
114 Specify SASL security properties.
115 -I Enable SASL Interactive mode. Always prompt. Default is to
117 prompt only as needed.
118 -Q Enable SASL Quiet mode. Never prompt.
120 -N Do not use reverse DNS to canonicalize SASL host name.
122 -U authcid
124 Specify the authentication ID for SASL bind. The form of the ID
125 depends on the actual SASL mechanism used.
126 -R realm
128 Specify the realm of authentication ID for SASL bind. The form
129 of the realm depends on the actual SASL mechanism used.
130 -X authzid
132 Specify the requested authorization ID for SASL bind. authzid
133 must be one of the following formats: dn:<distinguished name> or
134 u:<username>
135 -Y mech
137 Specify the SASL mechanism to be used for authentication. If
138 it's not specified, the program will choose the best mechanism
139 the server knows.
140 -Z[Z] Issue StartTLS (Transport Layer Security) extended operation. If
142 you use -ZZ, the command will require the operation to be suc‐
143 cessful.
144
146 ldapcompare "uid=babs,dc=example,dc=com" sn:Jensen
147 ldapcompare "uid=babs,dc=example,dc=com" sn::SmVuc2Vu
148 are all equivalent.
149
151 Requiring the value be passed on the command line is limiting and in‐
152 troduces some security concerns. The command should support a mecha‐
153 nism to specify the location (file name or URL) to read the value from.
154
156 ldap.conf(5), ldif(5), ldap(3), ldap_compare_ext(3)
157
159 The OpenLDAP Project <http://www.openldap.org/>
160
162 OpenLDAP Software is developed and maintained by The OpenLDAP Project
163 <http://www.openldap.org/>. OpenLDAP Software is derived from the Uni‐
164 versity of Michigan LDAP 3.3 Release.
165OpenLDAP 2.6.2 2022/05/04 LDAPCOMPARE(1)