1MRTG-SQUID(1)                        mrtg                        MRTG-SQUID(1)
2
3
4

NAME

6       mrtg-squid - using mrtg to monitor Squid
7

DESCRIPTION

9       Squid 2.3 knows SNMP and you can therefore use mrtg to monitor it quite
10       easily.
11
12       I have made some modifications to mrtg which simplify this.  My work is
13       based on earlier modification made by: matija.grabnar@arnes.si and
14       kostas@nlanr.net.
15

MODIFICATIONS

17       I added new code for displaying correct units to the previous patches
18       "perminute" and "perhour" ("option" tokens), which allows other
19       measurement in addition to "persecond".
20
21       Then I created a new option token "dorelpercent" which allows the
22       calculation of the percentage of IN-stream / OUT-stream on the fly and
23       then displays it on a fixed scale from 0% to 100%. For my requirements,
24       this does good work. Maybe someone wants a floating scale. It should
25       not be a problem to implement it, too (but give me an option to keep my
26       fixed scale). If IN-stream is always less than OUT-stream both lines
27       (OUT-stream and relative percent) are always displayed on top of IN-
28       stream bulk. Otherwise this option makes no sense. With this option you
29       can display hitrates, errorrates (for router monitoring: rel.
30       droprates) easily now.
31
32       If you use this options please consider that you need a 5th
33       colourname/value pair in your Colours statements!
34
35       Due to some discussion on this list, I have implemented two tokens too:
36
37       "kilo" and "kMG"
38
39       "kilo" should contain the value of k (1000 or 1024), where 1000 is the
40       default.
41
42       "kMG" is a comma separated list of multiplier prefixes, used instead of
43       "", "k", "M", "G", "T" on the MRTG display. Leave the place free, if
44       you want no prefix.
45
46       Also an incomplete list of OIDs for the new SQUID release is added.
47
48       You may need to turn on snmp_port in squid.conf to as it is disabled by
49       default.
50
51       I hope you enjoy it.
52

CONFIG EXAMPLE

54       First load the squid mib
55
56        LoadMIBs: /usr/share/squid/mib.txt
57
58       You can measure responsetimes in ms and display it with MRTG correctly
59       with:
60
61        kMG[measure-ms]: m,,k,M,G,T
62        short[measure-ms]: s
63
64       You can display now MB/s as 1024*1024 B/s with:
65
66        kilo[volume]: 1024
67
68       Assuming you're not running squid's SNMP on the default snmp port, you
69       need to include a port number in your target line:
70
71        Target[proxy-hit]: cacheHttpHits&cacheProtoClientHttpRequests:public@localhost:3401
72
73       A sample config for squid:
74
75        Target[proxy-hit]: cacheHttpHits&cacheProtoClientHttpRequests:public@proxy
76        Title[proxy-hit]: HTTP Hits
77        PageTop[proxy-hit]: <H2>proxy Cache Statistics: HTTP Hits / Requests</H2>
78        Suppress[proxy-hit]: y
79        LegendI[proxy-hit]:  HTTP hits
80        LegendO[proxy-hit]:  HTTP requests
81        Legend1[proxy-hit]:  HTTP hits
82        Legend2[proxy-hit]:  HTTP requests
83        YLegend[proxy-hit]: perminute
84        ShortLegend[proxy-hit]: req/min
85        Options[proxy-hit]: nopercent, perminute, dorelpercent
86
87        Target[proxy-srvkbinout]: cacheServerInKb&cacheServerOutKb:public@proxy
88        Title[proxy-srvkbinout]: Cache Server Traffic In / Out
89        PageTop[proxy-srvkbinout]: <H2>Cache Statistics: Server traffic volume (In/Out) </H2>
90        Suppress[proxy-srvkbinout]: y
91        LegendI[proxy-srvkbinout]:  Traffic In
92        LegendO[proxy-srvkbinout]:  Traffic Out
93        Legend1[proxy-srvkbinout]:  Traffic In
94        Legend2[proxy-srvkbinout]:  Traffic Out
95        YLegend[proxy-srvkbinout]: per minute
96        ShortLegend[proxy-srvkbinout]: b/min
97        kMG[proxy-srvkbinout]: k,M,G,T
98        kilo[proxy-srvkbinout]: 1024
99        Options[proxy-srvkbinout]: nopercent, perminute
100

AUTHOR

102       Andreas Papst <andreas.papst@univie.ac.at> Dirk-LXder Kreie
103       <deelkar@gmx.de> Chris Chiappa <chris+debian@chiappa.net>
104
105
106
1072.17.10                           2022-01-19                     MRTG-SQUID(1)
Impressum