1NVME-WDC-VS-TELEM(1) NVMe Manual NVME-WDC-VS-TELEM(1)
2
3
4
6 nvme-wdc-vs-telemetry-controller-option - Disable/Enable the controller
7 initiated option of the telemetry log page.
8
10 nvme wdc vs-telemetry-controller-option <device> [--disable, -d] [--enable, -e]
11 [--status, -s]
12
14 For the NVMe device given, sends the WDC Vendor Specific set feature
15 command to disable, enable or get current status of the controller
16 initiated option of the telemetry log page.
17
18 The <device> parameter is mandatory NVMe character device (ex:
19 /dev/nvme0).
20
21 This will only work on WDC devices supporting this feature. Results for
22 any other device are undefined.
23
25 -d, --disable
26 Disables the controller initiated option of the telemetry log page.
27
28 -e, --enable
29 Enables the controller initiated option of the telemetry log page.
30
31 -s, --status
32 Returns the current status (enabled or disabled) of the controller
33 initiated option of the telemetry log page.
34
36 • Disables the controller initiated option of the telemetry log page:
37
38 # nvme wdc vs-telemetry-controller-option /dev/nvme0 --disable
39 # nvme wdc vs-telemetry-controller-option /dev/nvme0 -d
40
41 • Enables the controller initiated option of the telemetry log page:
42
43 # nvme wdc vs-telemetry-controller-option /dev/nvme0 --enable
44 # nvme wdc vs-telemetry-controller-option /dev/nvme0 -e
45
46 • Gets the current status (enabled or disabled) of the controller
47 initiated option of the telemetry log page:
48
49 # nvme wdc vs-telemetry-controller-option /dev/nvme0 --status
50 # nvme wdc vs-telemetry-controller-option /dev/nvme0 -s
51
53 Part of the nvme-user suite.
54
55
56
57NVMe 04/11/2022 NVME-WDC-VS-TELEM(1)