1UHD_SIGGEN_GUI(1)                User Commands               UHD_SIGGEN_GUI(1)
2
3
4

NAME

6       uhd_siggen_gui - GNU Radio signal generator using UHD hardware
7

SYNOPSIS

9       uhd_siggen_gui: [options]
10

DESCRIPTION

12       GUI to allow UHD supported hardware to be a signal generator.
13

OPTIONS

15       -h, --help
16              show this help message and exit
17
18       -a ARGS, --args=ARGS
19              UHD device address args , [default=]
20
21       --spec=SPEC
22              Subdevice of UHD device where appropriate
23
24       -A ANTENNA, --antenna=ANTENNA
25              select Rx Antenna where appropriate
26
27       -s SAMP_RATE, --samp-rate=SAMP_RATE
28              set sample rate (bandwidth) [default=1000000.0]
29
30       -g GAIN, --gain=GAIN
31              set gain in dB (default is midpoint)
32
33       -f FREQ, --tx-freq=FREQ
34              Set carrier frequency to FREQ [default=mid-point]
35
36       -x WAVEFORM_FREQ, --waveform-freq=WAVEFORM_FREQ
37              Set baseband waveform frequency to FREQ [default=0]
38
39       -y WAVEFORM2_FREQ, --waveform2-freq=WAVEFORM2_FREQ
40              Set 2nd waveform frequency to FREQ [default=none]
41
42       --sine Generate a carrier modulated by a complex sine wave
43
44       --const
45              Generate a constant carrier
46
47       --offset=OFFSET
48              Set waveform phase offset to OFFSET [default=0]
49
50       --gaussian
51              Generate Gaussian random output
52
53       --uniform
54              Generate Uniform random output
55
56       --2tone
57              Generate Two Tone signal for IMD testing
58
59       --sweep
60              Generate a swept sine wave
61
62       --amplitude=AMPL
63              Set output amplitude to AMPL (0.0-1.0) [default=0.15]
64
65       -v, --verbose
66              Use verbose console output [default=False]
67

SEE ALSO

69       uhd_siggen(1)
70
71
72
73uhd_siggen_gui 3.10.1.0           2022-05-13                 UHD_SIGGEN_GUI(1)
Impressum