1Log::Handler(3) User Contributed Perl Documentation Log::Handler(3)
2
6 Log::Handler - Log messages to several outputs.
7
9 use Log::Handler;
10 my $log = Log::Handler->new();
12 $log->add(
14 file => {
15 filename => "file.log",
16 maxlevel => "debug",
17 minlevel => "warning",
18 }
19 );
20 $log->warning("message");
22 Or
24 use Log::Handler;
26 my $log = Log::Handler->new(
28 screen => {
29 log_to => "STDOUT",
30 maxlevel => "debug",
31 minlevel => "debug",
32 message_layout => "%T [%L] %m (%C)",
33 },
34 screen => {
35 log_to => "STDOUT",
36 maxlevel => "info",
37 minlevel => "notice",
38 },
39 screen => {
40 log_to => "STDERR",
41 maxlevel => "warning",
42 minlevel => "emergency",
43 },
44 );
45 Or
47 use Log::Handler;
49 my $log = Log::Handler->new();
51 $log->config( config => "logger.conf" );
53 # and maybe later
55 $log->reload( config => "logger.conf" );
57 Or
59 # create a application wide logger
61 package MyApp;
62 use Log::Handler;
63 my $log = Log::Handler->create_logger("myapp");
64 $log->add(screen => { maxlevel => "info" });
65 $log->info("info message");
66 # get logger with get_logger()
68 package MyApp::Admin;
69 use Log::Handler;
70 my $log = Log::Handler->get_logger("myapp");
71 $log->info("info message from MyApp::Admin");
72
74 The "Log::Handler" is a object oriented handler for logging, tracing
75 and debugging. It is very easy to use and provides a simple interface
76 for multiple output objects with lots of configuration parameters. You
77 can easily filter the amount of logged information on a per-output
78 base, define priorities, create patterns to format the messages and
79 reload the complete logging machine.
80 See the documentation for details.
82
84 Note that the default for option "newline" is now set to TRUE and
85 newlines will be appended automatically to each message if no newline
86 exists.
87 A long time I thought about this serious change and have come to the
89 decision to change it.
90 The default for option "mode" from Log::Handler::Output::File is now
92 "append" and not "excl" anymore.
93 The methods "reload()" and "validate()" are new since version 0.62. I
95 tested it with Screen.pm, File.pm and DBI.pm and it runs fine. If you
96 find bugs then open a bug report please :-)
97
99 There are eigth levels available:
100 7 debug
102 6 info
103 5 notice
104 4 warning, warn
105 3 error, err
106 2 critical, crit
107 1 alert
108 0 emergency, emerg
109 "debug" is the highest and "emergency" is the lowest level.
111 Level "debug" is the highest level because it basically says to log
113 every peep.
114
116 Level methods
117 debug()
118 info()
119 notice()
120 warning(), warn()
121 error(), err()
122 critical(), crit()
123 alert()
124 emergency(), emerg()
125 The call of a log level method is very simple:
127 $log->info("Hello World! How are you?");
129 Or maybe:
131 $log->info("Hello World!", "How are you?");
133 Both calls would log - if level INFO is active:
135 Feb 01 12:56:31 [INFO] Hello World! How are you?
137 is_* methods
139 is_debug()
140 is_info()
141 is_notice()
142 is_warning(), is_warn()
143 is_error(), is_err()
144 is_critical(), is_crit()
145 is_alert()
146 is_emergency(), is_emerg()
147 These twelve methods could be very useful if you want to kwow if the
149 current level would log the message. All methods returns TRUE if the
150 current set of "minlevel" and "maxlevel" would log the message and
151 FALSE if not.
152
154 fatal, is_fatal
155 trace
156 dump
157 die
158 log
159 For a full list take a look into the documentation of
161 Log::Handler::Levels.
162
164 new()
165 Call "new()" to create a new log handler object.
166 my $log = Log::Handler->new();
168 add()
170 Call "add()" to add a new output object.
171 The method expects 2 parts of options; the options for the handler and
173 the options for the output module you want to use. The output modules
174 got it's own documentation for all options.
175 Example:
177 use Log::Handler;
179 my $log = Log::Handler->new();
181 $log->add(
183 # Add "file output"
185 file => {
186 # handler options (see Log::Handler)
188 timeformat => "%Y/%m/%d %H:%M:%S",
189 message_layout => "%T [%L] %S: %m",
190 maxlevel => "debug",
191 minlevel => "emergency",
192 die_on_errors => 1,
193 debug_trace => 0,
194 debug_mode => 2,
195 debug_skip => 0,
196 # file options (see Log::Handler::Output::File)
198 filename => "file.log",
199 filelock => 1,
200 fileopen => 1,
201 reopen => 1,
202 autoflush => 1,
203 permissions => "0660",
204 utf8 => 1,
205 }
207 );
208 Take a look to Log::Handler::Examples for more examples.
210 The following options are possible for the handler:
212 maxlevel and minlevel
214 With these options it's possible to set the log levels for your
215 program.
216 Example:
218 maxlevel => "error"
220 minlevel => "emergency"
221 # or
223 maxlevel => "err"
225 minlevel => "emerg"
226 # or
228 maxlevel => 3
230 minlevel => 0
231 It's possible to set the log level as string or as number. The
233 default setting for "maxlevel" is "warning" and the default setting
234 for "minlevel" is "emergency".
235 Example: If "maxlevel" is set to "warning" and "minlevel" to
237 "emergency" then the levels "warning", "error", "critical", "alert"
238 and "emergency" would be logged.
239 You can set both to 8 or "nothing" if you want to disable the
241 logging machine.
242 timeformat
244 The option "timeformat" is used to set the format for the
245 placeholder %T. The string is converted with "POSIX::strftime".
246 The default format is set to "%b %d %H:%M:%S" and looks like
247 Feb 01 12:56:31
249 If you would set the format to "%Y/%m/%d %H:%M:%S" it would looks
251 like
252 2007/02/01 12:56:31
254 dateformat
256 This options works like "timeformat". You can set a format that is
257 used for the placeholder %D. It's just useful if you want to split
258 the date and time:
259 $log->add(file => {
261 filename => "file.log",
262 dateformat => "%Y-%m-%d",
263 timeformat => "%H:%M:%S",
264 message_layout => "%D %T %L %m",
265 });
266 $log->error("an error here");
268 This looks like
270 2007-02-01 12:56:31 ERROR an error here
272 This option is not used by default.
274 newline
276 "newline" is a very helpful option. It let the logger appends a
277 newline to the message if a newline doesn't exist.
278 0 - do nothing
280 1 - append a newline if not exist (default)
281 Example:
283 $log->add(
285 screen => {
286 newline => 1,
287 maxlevel => "info",
288 }
289 );
290 $log->info("message\n");
292 $log->info("message");
293 In both cases the message would be logged with a newline at the
295 end.
296 message_layout
298 With this option it's possible to create your own message layout
299 with different placeholders in "printf()" style. The available
300 placeholders are:
301 %L Log level
303 %T Time or full timestamp (option timeformat)
304 %D Date (option dateformat)
305 %P PID
306 %H Hostname
307 %U User name
308 %G Group name
309 %N Newline
310 %S Program name
311 %C Caller - filename and line number
312 %p Caller - package name
313 %f Caller - file name
314 %l Caller - line number
315 %s Caller - subroutine name
316 %r Runtime in seconds since program start
317 %t Time measurement - replaced with the time since the last call of $log->$level
318 %m Message
319 %% Percent
320 The default message layout is set to "%T [%L] %m".
322 As example the following code
324 $log->alert("foo bar");
326 would log
328 Feb 01 12:56:31 [ALERT] foo bar
330 If you set "message_layout" to
332 message_layout => "%T foo %L bar %m (%C)"
334 and call
336 $log->info("baz");
338 then it would log
340 Feb 01 12:56:31 foo INFO bar baz (script.pl, line 40)
342 Traces will be appended after the complete message.
344 You can create your own placeholders with the method
346 "set_pattern()".
347 message_pattern
349 This option is just useful if you want to forward messages to
350 output modules that needs the parts of a message as a hash
351 reference - as example Log::Handler::Output::Forward,
352 Log::Handler::Output::DBI or Log::Handler::Output::Screen.
353 The option expects a list of placeholders:
355 # as a array reference
357 message_pattern => [ qw/%T %L %H %m/ ]
358 # or as a string
360 message_pattern => "%T %L %H %m"
361 The patterns will be replaced with real names as hash keys.
363 %L level
365 %T time
366 %D date
367 %P pid
368 %H hostname
369 %U user
370 %G group
371 %N newline
372 %r runtime
373 %C caller
374 %p package
375 %f filename
376 %l line
377 %s subroutine
378 %S progname
379 %t mtime
380 %m message
381 Here a full code example:
383 use Log::Handler;
385 my $log = Log::Handler->new();
387 $log->add(forward => {
389 forward_to => \&my_func,
390 message_pattern => [ qw/%T %L %H %m/ ],
391 message_layout => "%m",
392 maxlevel => "info",
393 });
394 $log->info("a forwarded message");
396 # now you can access it
398 sub my_func {
400 my $msg = shift;
401 print "Timestamp: $msg->{time}\n";
402 print "Level: $msg->{level}\n";
403 print "Hostname: $msg->{hostname}\n";
404 print "Message: $msg->{message}\n";
405 }
406 prepare_message
408 "prepare_message" is useful if you want to do something with the
409 message before it will be logged... maybe you want to create your
410 own layout because message_layout doesn't meet your claim.
411 $log->add(
413 screen => {
414 newline => 1,
415 message_layout => "%m (%t)",
416 message_pattern => [ qw/%T %L %H %m/ ],
417 prepare_message => \&format,
418 }
419 );
420 $log->error("foo");
422 $log->error("bar");
423 $log->error("baz");
424 sub format {
426 my $m = shift;
427 $m->{message} = sprintf("%-20s %-20s %-20s %s",
429 $m->{time}, $m->{level}, $m->{hostname}, $m->{message});
430 }
431 The output looks like
433 Mar 08 15:14:20 ERROR h1434036 foo (0.039694)
435 Mar 08 15:14:20 ERROR h1434036 bar (0.000510)
436 Mar 08 15:14:20 ERROR h1434036 baz (0.000274)
437 priority
439 With this option you can set the priority of your output objects.
440 This means that messages will be logged at first to the outputs
441 with a higher priority. If this option is not set then the default
442 priority begins with 10 and will be increased +1 with each output.
443 Example:
444 We add a output with no priority
446 $log->add(file => { filename => "file1.log" });
448 This output gets the priority of 10. Now we add another output
450 $log->add(file => { filename => "file2.log" });
452 This output gets the priority of 11... and so on.
454 Messages would be logged at first to the output with the priority
456 of 10 and then to the output with the priority of 11. Now you can
457 add another output and set the priority to 1.
458 $log->add(screen => { dump => 1, priority => 1 });
460 Messages would be logged now at first to the screen.
462 die_on_errors
464 Set "die_on_errors" to 0 if you don't want that the handler dies on
465 failed write operations.
466 0 - to disable it
468 1 - to enable it
469 If you set "die_on_errors" to 0 then you have to control it
471 yourself.
472 $log->info("info message") or die $log->errstr();
474 # or Log::Handler->errstr()
476 # or Log::Handler::errstr()
477 # or $Log::Handler::ERRSTR
478 remove_on_reload
480 This option is set to 1 by default.
481 Take a look to the description of the method "reload" for more
483 information about this option.
484 filter_message
486 With this option it's possible to set a filter. If the filter is
487 set then only messages will be logged that match the filter. You
488 can pass a regexp, a code reference or a simple string. Example:
489 $log->add(file => {
491 filename => "file.log",
492 maxlevel => 6,
493 filter_message => qr/log this/,
494 # or
495 # filter_message => "log this",
496 # filter_message => '^log only this$',
497 });
498 $log->info("log this");
500 $log->info("but not that");
501 If you pass your own code then you have to check the message
503 yourself.
504 $log->add(file => {
506 filename => "file.log",
507 maxlevel => 6,
508 filter_message => \&my_filter
509 });
510 # return TRUE if you want to log the message, FALSE if not
512 sub my_filter {
513 my $msg = shift;
514 $msg->{message} =~ /your filter/;
515 }
516 It's also possible to define a simple condition with matches. Just
518 pass a hash reference with the options "matchN" and "condition".
519 Example:
520 $log->add(file => {
522 filename => "file.log",
523 maxlevel => 6,
524 filter_message => {
525 match1 => "log this",
526 match2 => qr/with that/,
527 match3 => "(?:or this|or that)",
528 condition => "(match1 && match2) || match3",
529 }
530 });
531 NOTE that re-eval in regexes is not valid! Something like
533 match1 => '(?{unlink("file.txt")})'
535 would cause an error!
537 skip_message
539 This is the opposite of option "filter_message", but it's only
540 possible to set a simple string or regular expression.
541 $log->add(file => {
543 filename => "file.log",
544 maxlevel => 6,
545 skip => '^do not log this.+$'
546 });
547 category
549 The parameter "category" works like "filter_caller" but is much
550 easier to configure. You can set a comma separated list of
551 modules. As example if you would set the category to
552 category => "MyApp::User"
554 then all messages of MyApp::User and the submodules would be
556 logged.
557 Example:
559 my $log = Log::Handler->new();
561 $log->add(
563 screen => {
564 maxlevel => "info",
565 category => "MyApp::User, MyApp::Session"
566 }
567 );
568 package MyApp;
570 $log->info(__PACKAGE__);
571 package MyApp::Products;
573 $log->info(__PACKAGE__);
574 package MyApp::User;
576 $log->info(__PACKAGE__);
577 package MyApp::Users;
579 $log->info(__PACKAGE__);
580 package MyApp::User::Settings;
582 $log->info(__PACKAGE__);
583 package MyApp::Session;
585 $log->info(__PACKAGE__);
586 package MyApp::Session::Settings;
588 $log->info(__PACKAGE__);
589 The messages of "MyApp" and "MyApp::Products" would not be logged.
591 The usage of categories is much faster than to filter by caller.
593 filter_caller
595 You can use this option to set a package name. Only messages from
596 this packages will be logged.
597 Example:
599 my $log = Log::Handler->new();
601 $log->add(screen => {
603 maxlevel => "info",
604 filter_caller => qr/^Foo::Bar\z/,
605 # or
606 # filter_caller => "^Foo::Bar\z",
607 });
608 package Foo::Bar;
610 $log->info("log this");
611 package Foo::Baz;
613 $log->info("but not that");
614 1;
616 This would only log the message from the package "Foo::Bar".
618 except_caller
620 This option is just the opposite of "filter_caller".
621 If you want to log messages from all callers but "Foo::Bar":
623 except_caller => qr/^Foo::Bar\z/
625 alias
627 You can set an alias if you want to get the output object later.
628 Example:
629 my $log = Log::Handler->new();
631 $log->add(screen => {
633 maxlevel => 7,
634 alias => "screen-out",
635 });
636 my $screen = $log->output("screen-out");
638 $screen->log(message => "foo");
640 # or in one step
642 $log->output("screen-out")->log(message => "foo");
644 debug_trace
646 You can activate a debugger that writes "caller()" information
647 about each active log level. The debugger is logging all defined
648 values except "hints" and "bitmask". Set "debug_trace" to 1 to
649 activate the debugger. The debugger is set to 0 by default.
650 debug_mode
652 There are two debug modes: line(1) and block(2) mode. The default
653 mode is 1.
654 The line mode looks like this:
656 use strict;
658 use warnings;
659 use Log::Handler;
660 my $log = Log::Handler->new()
662 $log->add(file => {
664 filename => "*STDOUT",
665 maxlevel => "debug",
666 debug_trace => 1,
667 debug_mode => 1
668 });
669 sub test1 { $log->warning() }
671 sub test2 { &test1; }
672 &test2;
674 Output:
676 Apr 26 12:54:11 [WARNING]
678 CALL(4): package(main) filename(./trace.pl) line(15) subroutine(main::test2) hasargs(0)
679 CALL(3): package(main) filename(./trace.pl) line(13) subroutine(main::test1) hasargs(0)
680 CALL(2): package(main) filename(./trace.pl) line(12) subroutine(Log::Handler::__ANON__) hasargs(1)
681 CALL(1): package(Log::Handler) filename(/usr/local/share/perl/5.8.8/Log/Handler.pm) line(713) subroutine(Log::Handler::_write) hasargs(1)
682 CALL(0): package(Log::Handler) filename(/usr/local/share/perl/5.8.8/Log/Handler.pm) line(1022) subroutine(Devel::Backtrace::new) hasargs(1) wantarray(0)
683 The same code example but the debugger in block mode would looks
685 like this:
686 debug_mode => 2
688 Output:
690 Apr 26 12:52:17 [DEBUG]
692 CALL(4):
693 package main
694 filename ./trace.pl
695 line 15
696 subroutine main::test2
697 hasargs 0
698 CALL(3):
699 package main
700 filename ./trace.pl
701 line 13
702 subroutine main::test1
703 hasargs 0
704 CALL(2):
705 package main
706 filename ./trace.pl
707 line 12
708 subroutine Log::Handler::__ANON__
709 hasargs 1
710 CALL(1):
711 package Log::Handler
712 filename /usr/local/share/perl/5.8.8/Log/Handler.pm
713 line 681
714 subroutine Log::Handler::_write
715 hasargs 1
716 CALL(0):
717 package Log::Handler
718 filename /usr/local/share/perl/5.8.8/Log/Handler.pm
719 line 990
720 subroutine Devel::Backtrace::new
721 hasargs 1
722 wantarray 0
723 debug_skip
725 This option let skip the "caller()" information the count of
726 "debug_skip".
727 output()
729 Call "output($alias)" to get the output object that you added with the
730 option "alias".
731 It's possible to access a output directly:
733 $log->output($alias)->log(message => "booo");
735 For more information take a look to the option "alias".
737 flush()
739 Call "flush()" if you want to send flush to all outputs that can flush.
740 Flush means to flush buffers and/or close and re-open outputs.
742 If you want to send it only to some outputs you can pass the aliases.
744 $log->flush(); # flush all
746 $log->flush("foo", "bar"); # flush only foo and bar
747 If option "die_on_errors" is set to 0 then you can intercept errors
749 with:
750 $log->flush or die $log->errstr;
752 errstr()
754 Call "errstr()" if you want to get the last error message. This is
755 useful if you set "die_on_errors" to 0 and the handler wouldn't die on
756 failed write operations.
757 use Log::Handler;
759 my $log = Log::Handler->new();
761 $log->add(file => {
763 filename => "file.log",
764 maxlevel => "info",
765 die_on_errors => 0,
766 });
767 $log->info("Hello World!") or die $log->errstr;
769 Or
771 unless ( $log->info("Hello World!") ) {
773 $error_string = $log->errstr;
774 # do something with $error_string
775 }
776 The exception is that the handler dies in any case if the call of
778 "new()" or "add()" fails because on missing or wrong settings!
779 config()
781 With this method it's possible to load your output configuration from a
782 file.
783 $log->config(config => "file.conf");
785 Or
787 $log->config(config => {
789 file => [
790 {
791 alias => "error_log",
792 filename => "error.log",
793 maxlevel => "warning",
794 minlevel => "emerg",
795 priority => 1
796 },
797 {
798 alias => "common_log",
799 filename => "common.log",
800 maxlevel => "info",
801 minlevel => "emerg",
802 priority => 2
803 },
804 ],
805 screen => {
806 alias => "screen",
807 maxlevel => "debug",
808 minlevel => "emerg",
809 log_to => "STDERR",
810 },
811 });
812 The key "default" is used here to define default parameters for all
814 file outputs. All other keys ("error_log", "common_log") are used as
815 aliases.
816 Take a look into the documentation of Log::Handler::Config for more
818 information.
819 reload()
821 With the method "reload()" it's possible to reload the logging machine.
822 Just pass the complete new configuration for all outputs, it works
823 exaclty like "config()".
824 At first you should know that it's highly recommended to set a alias
826 for each output. If you don't set a alias then the logger doesn't know
827 which output-objects to reload. If a output-objects doesn't have a
828 alias then the objects will be removed and the new configuration will
829 be added.
830 Example:
832 logger.conf
834 <file>
836 alias = debug
837 filename = debug.log
838 maxlevel = debug
839 minlevel = emerg
840 </file>
841 <file>
843 alias = common
844 filename = common.log
845 maxlevel = info
846 minlevel = emerg
847 </file>
848 Load the configuration
850 $log->config(config => "logger.conf");
852 Now change the configuration in logger.conf
854 <file>
856 alias = common
857 filename = common.log
858 maxlevel = notice
859 minlevel = emerg
860 </file>
861 <sendmail>
863 alias = sendmail
864 from = bar@foo.example
865 to = foo@bar.example
866 subject = your subject
867 </sendmail>
868 What happends now...
870 The file-output with the alias "debug" will be removed, the file-output
872 with the alias "common" will be reloaded and the output with the alias
873 "sendmail" will be added.
874 If you don't want that output-objects will be removed because they were
876 added internal, then you can set the option "remove_on_reload" to 0.
877 Example:
879 $log->config(config => "logger.conf");
881 $log->add(
883 forward => {
884 forward_to => \&my_func,
885 remove_on_reload => 0,
886 }
887 );
888 The forward-output is not removed after a reload.
890 validate()
892 The method "validate()" expects the same arguments like "config()" and
893 "reload()".
894 Maybe you want to validate your options before you pass them to
896 "config()" or "reload()".
897 Example:
899 my $log = Log::Handler->new();
901 $log->config( config => \%config );
903 # and maybe later
905 if ( $log->validate( config => \%new_config ) ) {
907 $log->reload( config => \%new_config );
908 } else {
909 warn "unable to reload configuration";
910 warn $log->errstr;
911 }
912 set_pattern()
914 With this option you can set your own placeholders. Example:
915 $log->set_pattern("%X", "key_name", sub { "value" });
917 # or
919 $log->set_pattern("%X", "key_name", "value");
921 Then you can use this pattern in your message layout:
923 $log->add(file => {
925 filename => "file.log",
926 message_layout => "%X %m%N",
927 });
928 Or use it with "message_pattern":
930 sub func {
932 my $m = shift;
933 print "$m->{key_name} $m->{message}\n";
934 }
935 $log->add(forward => {
937 forward_to => \&func,
938 message_pattern => "%X %m",
939 });
940 Note: valid character for the key name are: "[%\w\-\.]+"
942 set_level()
944 With this method it's possible to change the log level at runtime.
945 To change the log level it's necessary to use a alias - see option
947 "alias".
948 $log->set_level(
950 $alias => { # option alias
951 minlevel => $new_minlevel,
952 maxlevel => $new_maxlevel,
953 }
954 );
955 set_default_param()
957 With this methods it's possible to overwrite the default settings for
958 new outputs.
959 Normally you would do something like
961 $log->add(
963 file => {
964 filename => "debug.log",
965 maxlevel => "info",
966 timeformat => "%b %d %Y %H:%M:%S",
967 message_layout => "[%T] %L %P %t %m (%C)"
968 }
969 );
970 $log->add(
972 file => {
973 filename => "error.log",
974 maxlevel => "error",
975 timeformat => "%b %d %Y %H:%M:%S",
976 message_layout => "[%T] %L %P %t %m (%C)"
977 }
978 );
979 Now you can simplify it with
981 $log->set_default_param(
983 timeformat => "%b %d %Y %H:%M:%S",
984 message_layout => "[%T] %L %P %t %m (%C)"
985 );
986 $logg->add(
988 file => {
989 filename => "debug.log",
990 maxlevel => "info"
991 }
992 );
993 $log->add(
995 file => {
996 filename => "error.log",
997 maxlevel => "error"
998 }
999 );
1000 create_logger()
1002 "create_logger()" is the same like "new()" but it creates a global
1003 logger.
1004 my $log = Log::Handler->create_logger("myapp");
1006 get_logger()
1008 With "get_logger()" it's possible to get a logger that was created with
1009 "create_logger()" or with
1010 use Log::Handler "myapp";
1012 Just call
1014 my $log = Log::Handler->get_logger("myapp");
1016 If the logger does not exists then a new logger will be created and
1018 returned.
1019 exists_logger()
1021 With "exists_logger()" it's possible to check if a logger exists and it
1022 returns TRUE or FALSE.
1023
1025 Log::Handler::Examples
1026
1028 The benchmark (examples/benchmark/benchmark.pl) runs on a Intel Core
1029 i7-920 with the following result:
1030 simple pattern output took : 1 wallclock secs ( 1.26 usr + 0.01 sys = 1.27 CPU) @ 78740.16/s (n=100000)
1032 default pattern output took : 2 wallclock secs ( 2.08 usr + 0.15 sys = 2.23 CPU) @ 44843.05/s (n=100000)
1033 complex pattern output took : 4 wallclock secs ( 3.22 usr + 0.23 sys = 3.45 CPU) @ 28985.51/s (n=100000)
1034 message pattern output took : 3 wallclock secs ( 2.72 usr + 0.16 sys = 2.88 CPU) @ 34722.22/s (n=100000)
1035 suppressed output took : 0 wallclock secs ( 0.08 usr + 0.00 sys = 0.08 CPU) @ 1250000.00/s (n=100000)
1036 filtered caller output took : 2 wallclock secs ( 2.10 usr + 0.68 sys = 2.78 CPU) @ 35971.22/s (n=100000)
1037 suppressed caller output took : 1 wallclock secs ( 0.54 usr + 0.00 sys = 0.54 CPU) @ 185185.19/s (n=100000)
1038 filtered messages output took : 3 wallclock secs ( 2.62 usr + 0.08 sys = 2.70 CPU) @ 37037.04/s (n=100000)
1039
1041 Send me a mail if you have questions.
1042
1044 Prerequisites for all modules:
1045 Carp
1047 Data::Dumper
1048 Fcntl
1049 Params::Validate
1050 POSIX
1051 Time::HiRes
1052 Sys::Hostname
1053 UNIVERSAL
1054 Recommended modules:
1056 Config::General
1058 Config::Properties
1059 DBI
1060 IO::Socket
1061 Net::SMTP
1062 YAML
1063 Just for the test suite:
1065 File::Spec
1067 Test::More
1068
1070 No exports.
1071
1073 Please report all bugs to <jschulz.cpan(at)bloonix.de>.
1074
1076 Jonny Schulz <jschulz.cpan(at)bloonix.de>.
1077
1079 Do you have any questions or ideas?
1080 MAIL: <jschulz.cpan(at)bloonix.de>
1082 IRC: irc.perl.org#perl
1084 If you send me a mail then add Log::Handler into the subject.
1086
1088 Copyright (C) 2007-2009 by Jonny Schulz. All rights reserved.
1089 This program is free software; you can redistribute it and/or modify it
1091 under the same terms as Perl itself.
1092perl v5.34.0 2022-01-21 Log::Handler(3)