1SMARTPQI(4) Linux Programmer's Manual SMARTPQI(4)
2
6 smartpqi - Microsemi Smart Family SCSI driver
7
9 modprobe smartpqi [disable_device_id_wildcards={0|1}]
10 [disable_heartbeat={0|1}]
11 [disable_ctrl_shutdown={0|1}]
12 [lockup_action={none|reboot|panic}]
13 [expose_ld_first={0|1}] [hide_vsep={0|1}]
14
16 smartpqi is a SCSI driver for Microsemi Smart Family controllers.
17 Supported ioctl() operations
19 For compatibility with applications written for the cciss(4) and
20 hpsa(4) drivers, many, but not all of the ioctl(2) operations supported
21 by the hpsa driver are also supported by the smartpqi driver. The data
22 structures used by these operations are described in the Linux kernel
23 source file include/linux/cciss_ioctl.h.
24 CCISS_DEREGDISK, CCISS_REGNEWDISK, CCISS_REGNEWD
26 These operations all do exactly the same thing, which is to
27 cause the driver to re-scan for new devices. This does exactly
28 the same thing as writing to the smartpqi-specific host rescan
29 attribute.
30 CCISS_GETPCIINFO
32 This operation returns the PCI domain, bus, device, and function
33 and "board ID" (PCI subsystem ID).
34 CCISS_GETDRIVVER
36 This operation returns the driver version in four bytes, encoded
37 as:
38 (major_version << 28) | (minor_version << 24) |
40 (release << 16) | revision
41 CCISS_PASSTHRU
43 Allows BMIC and CISS commands to be passed through to the con‐
44 troller.
45 Boot options
47 disable_device_id_wildcards={0|1}
48 Disables support for device ID wildcards. The default value is
49 0.
50 disable_heartbeat={0|1}
52 Disables support for the controller's heartbeat check. This pa‐
53 rameter is used for debugging purposes. The default value is 0,
54 leaving the controller's heartbeat check active.
55 disable_ctrl_shutdown={0|1}
57 Disables support for shutting down the controller in the event
58 of a controller lockup. The default value is 0.
59 lockup_action={none|reboot|panic}
61 Specifies the action the driver takes when a controller lockup
62 is detected. The default action is none.
63 parameter action
65 ─────────────────────────────────────────────
66 none take controller offline only
68 reboot reboot the system
69 panic panic the system
70 expose_ld_first={0|1}
72 This option enables support for exposing logical devices to the
73 operating system before physical devices. The default value is
74 0.
75 hide_vsep={0|1}
77 This option enables disabling exposure of the virtual SEP to the
78 host. This is usually associated with direct attached drives.
79 The default value is 0.
80
82 Device nodes
83 Logical drives are accessed via the SCSI disk driver (sd), tape drives
84 via the SCSI tape driver (st), and the RAID controller via the SCSI
85 generic driver (sg), with device nodes named /dev/sd*, /dev/st*, and
86 /dev/sg*, respectively.
87 SmartPQI-specific host attribute files in /sys
89 /sys/class/scsi_host/host*/rescan
90 The host rescan attribute is a write-only attribute. Writing to
91 this attribute will cause the driver to scan for new, changed,
92 or removed devices (e.g., hot-plugged tape drives, or newly con‐
93 figured or deleted logical drives) and notify the SCSI mid-layer
94 of any changes detected. Usually this action is triggered auto‐
95 matically by configuration changes, so the user should not nor‐
96 mally have to write to this file. Doing so may be useful when
97 hot-plugging devices such as tape drives or entire storage boxes
98 containing pre-configured logical drives.
99 /sys/class/scsi_host/host*/version
101 The host version attribute is a read-only attribute. This at‐
102 tribute contains the driver version and the controller firmware
103 version.
104 For example:
106 $ cat /sys/class/scsi_host/host1/version
108 driver: 1.1.2-126
109 firmware: 1.29-112
110 /sys/class/scsi_host/host*/lockup_action
112 The host lockup_action attribute is a read/write attribute.
113 This attribute will cause the driver to perform a specific ac‐
114 tion in the unlikely event that a controller lockup has been de‐
115 tected. See OPTIONS above for an explanation of the lockup_ac‐
116 tion values.
117 /sys/class/scsi_host/host*/driver_version
119 The driver_version attribute is read-only. This attribute con‐
120 tains the smartpqi driver version.
121 For example:
123 $ cat /sys/class/scsi_host/host1/driver_version
125 1.1.2-126
126 /sys/class/scsi_host/host*/firmware_version
128 The firmware_version attribute is read-only. This attribute
129 contains the controller firmware version.
130 For example:
132 $ cat /sys/class/scsi_host/host1/firmware_version
134 1.29-112
135 /sys/class/scsi_host/host*/model
137 The model attribute is read-only. This attribute contains the
138 product identification string of the controller.
139 For example:
141 $ cat /sys/class/scsi_host/host1/model
143 1100-16i
144 /sys/class/scsi_host/host*/serial_number
146 The serial_number attribute is read-only. This attribute con‐
147 tains the unique identification number of the controller.
148 For example:
150 $ cat /sys/class/scsi_host/host1/serial_number
152 6A316373777
153 /sys/class/scsi_host/host*/vendor
155 The vendor attribute is read-only. This attribute contains the
156 vendor identification string of the controller.
157 For example:
159 $ cat /sys/class/scsi_host/host1/vendor
161 Adaptec
162 SmartPQI-specific disk attribute files in /sys
164 In the file specifications below, c stands for the number of the appro‐
165 priate SCSI controller, b is the bus number, t the target number, and l
166 is the logical unit number (LUN).
167 /sys/class/scsi_disk/c:b:t:l/device/raid_level
169 The raid_level attribute is read-only. This attribute contains
170 the RAID level of each logical drive.
171 For example:
173 $ cat /sys/class/scsi_disk/4:0:0:0/device/raid_level
175 RAID 0
176 /sys/class/scsi_disk/c:b:t:l/device/sas_address
178 The sas_address attribute is read-only. This attribute contains
179 the unique identifier of the disk.
180 For example:
182 $ cat /sys/class/scsi_disk/1:0:3:0/device/sas_address
184 0x5001173d028543a2
185 /sys/class/scsi_disk/c:b:t:l/device/ssd_smart_path_enabled
187 The ssd_smart_path_enabled attribute is read-only. This attri‐
188 bute is for ioaccel-enabled volumes. (Ioaccel is an alternative
189 driver submission path that allows the driver to send I/O re‐
190 quests directly to backend SCSI devices, bypassing the con‐
191 troller firmware. This results in an increase in performance.
192 This method is used for HBA disks and for logical volumes com‐
193 prised of SSDs.) Contains 1 if ioaccel is enabled for the vol‐
194 ume and 0 otherwise.
195 For example:
197 $ cat /sys/class/scsi_disk/1:0:3:0/device/ssd_smart_path_enabled
199 0
200
202 The smartpqi driver was added in Linux 4.9.
203
205 Configuration
206 To configure a Microsemi Smart Family controller, refer to the User
207 Guide for the controller, which can be found by searching for the spe‐
208 cific controller at ⟨https://storage.microsemi.com/⟩.
209
211 cciss(4), hpsa(4), sd(4), st(4)
212 Documentation/ABI/testing/sysfs-bus-pci-devices-cciss in the Linux ker‐
214 nel source tree.
215
217 This page is part of release 5.13 of the Linux man-pages project. A
218 description of the project, information about reporting bugs, and the
219 latest version of this page, can be found at
220 https://www.kernel.org/doc/man-pages/.
221Linux 2021-03-22 SMARTPQI(4)