1ipmiseld.conf(5)                 ipmiseld.conf                ipmiseld.conf(5)
2
3
4

NAME

6       ipmiseld.conf - ipmiseld configuration file
7

DESCRIPTION

9       The ipmiseld configuration file configures the ipmiseld daemon.
10
11       The default configuration file loaded is /etc/freeipmi//ipmiseld.conf.
12
13       The  configuration  options  that can be specified in the configuration
14       file are listed below. Each configuration option must be  listed  on  a
15       separate  line.  Arguments for an option are separated by any amount of
16       whitespace. Multiple arguments are also separated by whitespace.   Com‐
17       ments  can be marked by using the pound sign ("#") character, and lines
18       can be continued on the next using backslash ("\").
19
20       Note that it is possible to list the username, password and  other  po‐
21       tentially sensitive information in the configuration file. If this data
22       is stored in a configuration file, system administrators  should  limit
23       access to this file.
24

IPMISELD CONFIGURATION OPTIONS

26       driver-type IPMIDRIVER
27              Specify the driver type to use.
28
29       disable-auto-probe ENABLE|DISABLE
30              Specify if IPMI devices should be probed for settings.
31
32       driver-address DRIVER-ADDRESS
33              Specify the in-band driver address to use.
34
35       driver-device DEVICE
36              Specify the in-band driver device path to use.
37
38       register-spacing REGISTER-SPACING
39              Specify the in-band driver register spacing to use.
40
41       target-channel-number CHANNEL-NUMBER
42              Specify the in-band driver target channel number.
43
44       target-slave-address SLAVE-ADDRESS
45              Specify the in-band driver target slave address.
46
47       hostname IPMIHOST1,IPMIHOST2,...
48              Specify  the  remote host(s) to communicate with. Multiple host‐
49              names may be separated by comma or may be specified in  a  range
50              format.
51
52       username USERNAME
53              Specify the username to use.
54
55       password PASSWORD
56              Specify the password to use.
57
58       k_g str
59              Specify  the BMC key (K_g) to use. Prefix with '0x' to enter the
60              key in hex.
61
62       session-timeout MILLISECONDS
63              Specify the session timeout length to use in milliseconds.
64
65       retransmission-timeout MILLISECONDS
66              Specify the retransmission timeout length to  use  in  millisec‐
67              onds.
68
69       authentication-type AUTHENTICATION-TYPE
70              Specify  the authentication type to use. The following authenti‐
71              cation types are supported:  NONE,  STRAIGHT_PASSWORD_KEY,  MD2,
72              and MD5.
73
74       cipher-suite-id CIPHER-SUITE-ID
75              Specify  the  cipher suite id to use. The following cipher suite
76              ids are supported: 0, 1, 2, 3, 6, 7, 8, 11, 12.
77
78       privilege-level PRIVILEGE-LEVEL
79              Specify the privilege type to use. The following privilege  lev‐
80              els are supported: USER, OPERATOR, ADMIN.
81
82       workaround-flags WORKAROUNDS
83              Specify  workaround  flags  to  use. Multiple workarounds can be
84              specified separated by whitespace. Please see tool manpages  for
85              details about available workarounds for each tool. The following
86              workarounds are  supported:  assumeio,  spinpoll,  idzero,  for‐
87              cepermsg,  unexpectedauth, endianseq, authcap, intel20, supermi‐
88              cro20, sun20,  opensesspriv,  integritycheckvalue,  assumesyste‐
89              mevent.
90
91       verbose-count COUNT
92              Specify default verbose count to use for ipmi-sel(8).
93
94       sensors-types TYPE-LIST
95              Specify sensor types of SEL events to log. Multiple types can be
96              specified separated by  whitespace.  Users  may  specify  sensor
97              types  by string or by number (decimal or hex). Please see ipmi-
98              sel(8) --list-types option to see possible string input types.
99
100       exclude-sensor-types ENSOR-TYPES-LIST
101              Specify sensor types of SEL events to not  log.  default  sensor
102              types  to not show sensor outputs for. Multiple sensor types can
103              be specified separated by whitespace. Users may  specify  sensor
104              types   by   string   or   by  number.  Please  see  ipmi-sel(8)
105              --list-types option to see possible string input types.
106
107       system-event-only ENABLE|DISABLE
108              Specify if output should only include system event records.
109
110       oem-event-only ENABLE|DISABLE
111              Specify if output should only include OEM event records.
112
113       event-state-config-file FILE
114              Specify the event state configuration file.
115
116       interpret-oem-data ENABLE|DISABLE
117              Specify if ipmiseld should attempt to interpret OEM data or not.
118
119       entity-sensor-names ENABLE|DISABLE
120              Specify if output of sensor names should include entity ids  and
121              instances or not.
122
123       non-abbreviated-units ENABLE|DISABLE
124              Specify  if  output  should have units abbreviated by default or
125              not.
126
127       event-state-filter FILTERSTRING
128              Specify event states to be filtered out and not logged.
129
130       --warning-threshold PERCENTINT
131              Specify SEL fullness warning threshold as an integer percentage.
132
133       --clear-threshold PERCENTINT
134              Specify SEL fullness clear threshold as an integer percentage.
135
136       system-event-format FORMATSTRING
137              Specify the format of the log output when a SEL system event  is
138              encountered.
139
140       oem-timestamped-event-format FORMATSTRING
141              Specify  the format of the log output when a SEL OEM timestamped
142              event is encountered.
143
144       oem-non-timestamped-event-format FORMATSTRING
145              Specify the format of the log output when a SEL  OEM  non-times‐
146              tamped event is encountered.
147
148       poll-interval SECONDS
149              Specify the poll interval to check the SEL for new events.
150
151       log-facility STRING
152              Specify the log facility to use.
153
154       log-priority STRING
155              Specify the log priority to use.
156
157       cache-directory DIRECTORY
158              Specify the cache directory to use.
159
160       ignore-sdr DISABLE
161              Specify if the SDR should be ignored.
162
163       re-download-sdr DISABLE
164              Specify if the SDR should be re-downloaded on start.
165
166       clear-sel DISABLE
167              Specify if the SEL should be cleared on start.
168
169       threadpool-count NUM
170              Specify the threadpool count for parallel SEL polling.
171

FILES

173       /etc/freeipmi//ipmiseld.conf
174

REPORTING BUGS

176       Report bugs to <freeipmi-users@gnu.org> or <freeipmi-devel@gnu.org>.
177
179       Copyright (C) 2012-2015 Lawrence Livermore National Security, LLC.
180

SEE ALSO

182       ipmiseld(8), ipmi-sel(8)
183
184       http://www.gnu.org/software/freeipmi/
185
186
187
188ipmiseld.conf 1.6.8               2021-05-20                  ipmiseld.conf(5)
Impressum