1OCF_HEARTBEAT_IPADDR(7)       OCF resource agents      OCF_HEARTBEAT_IPADDR(7)
2
3
4

NAME

6       ocf_heartbeat_IPaddr2 - Manages virtual IPv4 and IPv6 addresses (Linux
7       specific version)
8

SYNOPSIS

10       IPaddr2 [start | stop | status | monitor | meta-data | validate-all]
11

DESCRIPTION

13       This Linux-specific resource manages IP alias IP addresses. It can add
14       an IP alias, or remove one. In addition, it can implement Cluster Alias
15       IP functionality if invoked as a clone resource.
16
17       If used as a clone, "shared address with a trivial, stateless
18       (autonomous) load-balancing/mutual exclusion on ingress" mode gets
19       applied (as opposed to "assume resource uniqueness" mode otherwise).
20       For that, Linux firewall (kernel and userspace) is assumed, and since
21       recent distributions are ambivalent in plain "iptables" command to
22       particular back-end resolution, "iptables-legacy" (when present) gets
23       prioritized so as to avoid incompatibilities (note that respective
24       ipt_CLUSTERIP firewall extension in use here is, at the same time,
25       marked deprecated, yet said "legacy" layer can make it workable,
26       literally, to this day) with "netfilter" one (as in "iptables-nft"). In
27       that case, you should explicitly set clone-node-max >= 2, and/or
28       clone-max < number of nodes. In case of node failure, clone instances
29       need to be re-allocated on surviving nodes. This would not be possible
30       if there is already an instance on those nodes, and clone-node-max=1
31       (which is the default).
32
33       When the specified IP address gets assigned to a respective interface,
34       the resource agent sends unsolicited ARP (Address Resolution Protocol,
35       IPv4) or NA (Neighbor Advertisement, IPv6) packets to inform
36       neighboring machines about the change. This functionality is controlled
37       for both IPv4 and IPv6 by shared 'arp_*' parameters.
38

SUPPORTED PARAMETERS

40       ip
41           The IPv4 (dotted quad notation) or IPv6 address (colon hexadecimal
42           notation) example IPv4 "192.168.1.1". example IPv6
43           "2001:db8:DC28:0:0:FC57:D4C8:1FFF".
44
45           (unique, required, string, no default)
46
47       nic
48           The base network interface on which the IP address will be brought
49           online. If left empty, the script will try and determine this from
50           the routing table.
51
52           Do NOT specify an alias interface in the form eth0:1 or anything
53           here; rather, specify the base interface only. If you want a label,
54           see the iflabel parameter.
55
56           Prerequisite:
57
58           There must be at least one static IP address, which is not managed
59           by the cluster, assigned to the network interface. If you can not
60           assign any static IP address on the interface, modify this kernel
61           parameter:
62
63           sysctl -w net.ipv4.conf.all.promote_secondaries=1 # (or per device)
64
65           (optional, string, no default)
66
67       cidr_netmask
68           The netmask for the interface in CIDR format (e.g., 24 and not
69           255.255.255.0)
70
71           If unspecified, the script will also try to determine this from the
72           routing table.
73
74           (optional, string, no default)
75
76       broadcast
77           Broadcast address associated with the IP. It is possible to use the
78           special symbols '+' and '-' instead of the broadcast address. In
79           this case, the broadcast address is derived by setting/resetting
80           the host bits of the interface prefix.
81
82           (optional, string, no default)
83
84       iflabel
85           You can specify an additional label for your IP address here. This
86           label is appended to your interface name.
87
88           The kernel allows alphanumeric labels up to a maximum length of 15
89           characters including the interface name and colon (e.g.
90           eth0:foobar1234)
91
92           A label can be specified in nic parameter but it is deprecated. If
93           a label is specified in nic name, this parameter has no effect.
94
95           (optional, string, no default)
96
97       lvs_support
98           Enable support for LVS Direct Routing configurations. In case a IP
99           address is stopped, only move it to the loopback device to allow
100           the local node to continue to service requests, but no longer
101           advertise it on the network.
102
103           Notes for IPv6: It is not necessary to enable this option on IPv6.
104           Instead, enable 'lvs_ipv6_addrlabel' option for LVS-DR usage on
105           IPv6.
106
107           (optional, boolean, default false)
108
109       lvs_ipv6_addrlabel
110           Enable adding IPv6 address label so IPv6 traffic originating from
111           the address's interface does not use this address as the source.
112           This is necessary for LVS-DR health checks to realservers to work.
113           Without it, the most recently added IPv6 address (probably the
114           address added by IPaddr2) will be used as the source address for
115           IPv6 traffic from that interface and since that address exists on
116           loopback on the realservers, the realserver response to
117           pings/connections will never leave its loopback. See RFC3484 for
118           the detail of the source address selection.
119
120           See also 'lvs_ipv6_addrlabel_value' parameter.
121
122           (optional, boolean, default false)
123
124       lvs_ipv6_addrlabel_value
125           Specify IPv6 address label value used when 'lvs_ipv6_addrlabel' is
126           enabled. The value should be an unused label in the policy table
127           which is shown by 'ip addrlabel list' command. You would rarely
128           need to change this parameter.
129
130           (optional, integer, default 99)
131
132       mac
133           Set the interface MAC address explicitly. Currently only used in
134           case of the Cluster IP Alias. Leave empty to chose automatically.
135
136           (optional, string, no default)
137
138       clusterip_hash
139           Specify the hashing algorithm used for the Cluster IP
140           functionality.
141
142           (optional, string, default "sourceip-sourceport")
143
144       unique_clone_address
145           If true, add the clone ID to the supplied value of IP to create a
146           unique address to manage
147
148           (optional, boolean, default false)
149
150       arp_interval
151           Specify the interval between unsolicited ARP (IPv4) or NA (IPv6)
152           packets in milliseconds.
153
154           This parameter is deprecated and used for the backward
155           compatibility only. It is effective only for the send_arp binary
156           which is built with libnet, and send_ua for IPv6. It has no effect
157           for other arp_sender.
158
159           (optional, integer, default 200)
160
161       arp_count
162           Number of unsolicited ARP (IPv4) or NA (IPv6) packets to send at
163           resource initialization.
164
165           (optional, integer, default 5)
166
167       arp_count_refresh
168           For IPv4, number of unsolicited ARP packets to send during resource
169           monitoring. Doing so helps mitigate issues of stuck ARP caches
170           resulting from split-brain situations.
171
172           (optional, integer, default 0)
173
174       arp_bg
175           Whether or not to send the ARP (IPv4) or NA (IPv6) packets in the
176           background. The default is true for IPv4 and false for IPv6.
177
178           (optional, string, no default)
179
180       arp_sender
181           For IPv4, the program to send ARP packets with on start. Available
182           options are: - send_arp: default - ipoibarping: default for
183           infiniband interfaces if ipoibarping is available - iputils_arping:
184           use arping in iputils package - libnet_arping: use another variant
185           of arping based on libnet
186
187           (optional, string, no default)
188
189       send_arp_opts
190           For IPv4, extra options to pass to the arp_sender program.
191           Available options are vary depending on which arp_sender is used.
192
193           A typical use case is specifying '-A' for iputils_arping to use ARP
194           REPLY instead of ARP REQUEST as Gratuitous ARPs.
195
196           (optional, string, no default)
197
198       flush_routes
199           Flush the routing table on stop. This is for applications which use
200           the cluster IP address and which run on the same physical host that
201           the IP address lives on. The Linux kernel may force that
202           application to take a shortcut to the local loopback interface,
203           instead of the interface the address is really bound to. Under
204           those circumstances, an application may, somewhat unexpectedly,
205           continue to use connections for some time even after the IP address
206           is deconfigured. Set this parameter in order to immediately disable
207           said shortcut when the IP address goes away.
208
209           (optional, boolean, default false)
210
211       run_arping
212           For IPv4, whether or not to run arping for collision detection
213           check.
214
215           (optional, string, default "false")
216
217       nodad
218           For IPv6, do not perform Duplicate Address Detection when adding
219           the address.
220
221           (optional, string, default "false")
222
223       noprefixroute
224           Use noprefixroute flag (see 'man ip-address').
225
226           (optional, string, default "false")
227
228       preferred_lft
229           For IPv6, set the preferred lifetime of the IP address. This can be
230           used to ensure that the created IP address will not be used as a
231           source address for routing. Expects a value as specified in section
232           5.5.4 of RFC 4862.
233
234           (optional, string, default "forever")
235
236       network_namespace
237           Specifies the network namespace to operate within. The namespace
238           must already exist, and the interface to be used must be within the
239           namespace.
240
241           (optional, string, no default)
242

SUPPORTED ACTIONS

244       This resource agent supports the following actions (operations):
245
246       start
247           Starts the resource. Suggested minimum timeout: 20s.
248
249       stop
250           Stops the resource. Suggested minimum timeout: 20s.
251
252       status
253           Performs a status check. Suggested minimum timeout: 20s. Suggested
254           interval: 10s.
255
256       monitor
257           Performs a detailed status check. Suggested minimum timeout: 20s.
258           Suggested interval: 10s.
259
260       meta-data
261           Retrieves resource agent metadata (internal use only). Suggested
262           minimum timeout: 5s.
263
264       validate-all
265           Performs a validation of the resource configuration. Suggested
266           minimum timeout: 20s.
267

EXAMPLE CRM SHELL

269       The following is an example configuration for a IPaddr2 resource using
270       the crm(8) shell:
271
272           primitive p_IPaddr2 ocf:heartbeat:IPaddr2 \
273             params \
274               ip=string \
275             op monitor depth="0" timeout="20s" interval="10s"
276

EXAMPLE PCS

278       The following is an example configuration for a IPaddr2 resource using
279       pcs(8)
280
281           pcs resource create p_IPaddr2 ocf:heartbeat:IPaddr2 \
282             ip=string \
283             op monitor OCF_CHECK_LEVEL="0" timeout="20s" interval="10s"
284

SEE ALSO

286       http://clusterlabs.org/
287

AUTHOR

289       ClusterLabs contributors (see the resource agent source for information
290       about individual authors)
291
292
293
294resource-agents UNKNOWN           04/06/2022           OCF_HEARTBEAT_IPADDR(7)
Impressum