1IBROUTE(8) Open IB Diagnostics IBROUTE(8)
2
6 ibroute - query InfiniBand switch forwarding tables
7
9 ibroute [options] [<dest dr_path|lid|guid> [<startlid> [<endlid>]]]
10
12 ibroute uses SMPs to display the forwarding tables (unicast (LinearFor‐
13 wardingTable or LFT) or multicast (MulticastForwardingTable or MFT))
14 for the specified switch LID and the optional lid (mlid) range. The
15 default range is all valid entries in the range 1...FDBTop.
16
18 -a, --all
19 show all lids in range, even invalid entries
20 -n, --no_dests
22 do not try to resolve destinations
23 -M, --Multicast
25 show multicast forwarding tables In this case, the range parame‐
26 ters are specifying the mlid range.
27 Addressing Flags
29 -D, --Direct The address specified is a directed route
30 Examples:
32 [options] -D [options] "0" # self port
33 [options] -D [options] "0,1,2,1,4" # out via port 1, then 2, ...
34 (Note the second number in the path specified must match the port being
36 used. This can be specified using the port selection flag '-P' or the
37 port found through the automatic selection process.)
38 -G, --Guid The address specified is a Port GUID
40 -L, --Lid The address specified is a LID
42 -s, --sm_port <smlid> use 'smlid' as the target lid for SA queries.
44 Port Selection flags
46 -C, --Ca <ca_name> use the specified ca_name.
47 -P, --Port <ca_port> use the specified ca_port.
49 Local port Selection
51 Multiple port/Multiple CA support: when no IB device or port is speci‐
52 fied (see the "local umad parameters" below), the libibumad library se‐
53 lects the port to use by the following criteria:
54 1. the first port that is ACTIVE.
56 2. if not found, the first port that is UP (physical link up).
58 If a port and/or CA name is specified, the libibumad library at‐
60 tempts to fulfill the user request, and will fail if it is not pos‐
61 sible.
62 For example:
64 ibaddr # use the first port (criteria #1 above)
66 ibaddr -C mthca1 # pick the best port from "mthca1" only.
67 ibaddr -P 2 # use the second (active/up) port from the first available IB device.
68 ibaddr -C mthca0 -P 2 # use the specified port only.
69 Debugging flags
71 -d raise the IB debugging level. May be used several times (-ddd
72 or -d -d -d).
73 -e show send and receive errors (timeouts and others)
75 -h, --help show the usage message
77 -v, --verbose
79 increase the application verbosity level. May be used several
80 times (-vv or -v -v -v)
81 -V, --version show the version info.
83 Configuration flags
85 -t, --timeout <timeout_ms> override the default timeout for the so‐
86 licited mads.
87 -y, --m_key <key>
89 use the specified M_key for requests. If non-numeric value (like
90 'x') is specified then a value will be prompted for.
91 --node-name-map <node-name-map> Specify a node name map.
93 This file maps GUIDs to more user friendly names. See FILES sec‐
94 tion.
95 --config, -z <config_file> Specify alternate config file.
97 Default: /etc/infiniband-diags/ibdiag.conf
98
100 CONFIG FILE
101 /etc/infiniband-diags/ibdiag.conf
102 A global config file is provided to set some of the common options for
104 all tools. See supplied config file for details.
105 NODE NAME MAP FILE FORMAT
107 The node name map is used to specify user friendly names for nodes in
108 the output. GUIDs are used to perform the lookup.
109 This functionality is provided by the opensm-libs package. See
111 opensm(8) for the file location for your installation.
112 Generically:
114 # comment
116 <guid> "<name>"
117 Example:
119 # IB1
121 # Line cards
122 0x0008f104003f125c "IB1 (Rack 11 slot 1 ) ISR9288/ISR9096 Voltaire sLB-24D"
123 0x0008f104003f125d "IB1 (Rack 11 slot 1 ) ISR9288/ISR9096 Voltaire sLB-24D"
124 0x0008f104003f10d2 "IB1 (Rack 11 slot 2 ) ISR9288/ISR9096 Voltaire sLB-24D"
125 0x0008f104003f10d3 "IB1 (Rack 11 slot 2 ) ISR9288/ISR9096 Voltaire sLB-24D"
126 0x0008f104003f10bf "IB1 (Rack 11 slot 12 ) ISR9288/ISR9096 Voltaire sLB-24D"
127 # Spines
129 0x0008f10400400e2d "IB1 (Rack 11 spine 1 ) ISR9288 Voltaire sFB-12D"
130 0x0008f10400400e2e "IB1 (Rack 11 spine 1 ) ISR9288 Voltaire sFB-12D"
131 0x0008f10400400e2f "IB1 (Rack 11 spine 1 ) ISR9288 Voltaire sFB-12D"
132 0x0008f10400400e31 "IB1 (Rack 11 spine 2 ) ISR9288 Voltaire sFB-12D"
133 0x0008f10400400e32 "IB1 (Rack 11 spine 2 ) ISR9288 Voltaire sFB-12D"
134 # GUID Node Name
136 0x0008f10400411a08 "SW1 (Rack 3) ISR9024 Voltaire 9024D"
137 0x0008f10400411a28 "SW2 (Rack 3) ISR9024 Voltaire 9024D"
138 0x0008f10400411a34 "SW3 (Rack 3) ISR9024 Voltaire 9024D"
139 0x0008f104004119d0 "SW4 (Rack 3) ISR9024 Voltaire 9024D"
140
142 Unicast examples
143 :: ibroute 4 # dump all lids with valid out ports of
145 switch with lid 4 ibroute -a 4 # same, but dump all
146 lids, even with invalid out ports ibroute -n 4 # sim‐
147 ple dump format - no destination resolution ibroute 4 10
148 # dump lids starting from 10 (up to FDBTop) ibroute 4 0x10 0x20
149 # dump lid range ibroute -G 0x08f1040023 # resolve switch by
150 GUID ibroute -D 0,1 # resolve switch by direct path
151 Multicast examples
153 :: ibroute -M 4 # dump all non empty mlids of switch
155 with lid 4 ibroute -M 4 0xc010 0xc020 # same, but with range
156 ibroute -M -n 4 # simple dump format
157
159 ibtracert (8)
160
162 Hal Rosenstock
163 < halr@voltaire.com >
164 2017-08-21 IBROUTE(8)