1METASYS(8) NUT Manual METASYS(8)
2
3
4
6 metasys - Driver for Meta System UPS equipment
7
9 This man page only documents the hardware-specific features of the
10 metasys driver. For information about the core driver, see
11 nutupsdrv(8).
12
14 The metasys driver was written with the "Meta System UPS Protocol
15 Rev.1.12" kindly supplied from Meta System.
16
17 The driver should support all the common features of the ups models:
18
19 · HF Line (/2) 1-8 boards
20
21 · HF Millennium (810, 820)
22
23 · HF TOP Line (910, 920, 930, 940, 950, 970, 980)
24
25 · ECO Network (750, 1000, 1050, 1500, 1800, 2000, 2100, 2500, 3000)
26
27 · ECO (305, 308, 311, 511, 516, 519, 522, SX, SXI)
28
29 · ally HF (800, 1000, 1250, 1600, 2000, 2500)
30
31 · Megaline (1250, 2500, 3750, 5000, 6250, 7500, 8750, 10000)
32
34 The needed cable is a standard pin-to-pin serial cable with at least
35 pins 2, 3, and 5 (on DB9 connector) connected.
36
38 This driver supports no extra arguments from ups.conf(5).
39
41 This driver has been tested on Meta System HF Millennium 820 and ally
42 HF 1000 only.
43
44 Any information about the use of the driver with the other listed UPS
45 are really welcome.
46
48 Fabio Di Niro <blaxwan@users.sourceforge.net>
49
51 The core driver:
52 nutupsdrv(8)
53
54 Internet resources:
55 The NUT (Network UPS Tools) home page: http://www.networkupstools.org/
56
57
58
59Network UPS Tools 2.7.3. 12/29/2015 METASYS(8)