1CME(1) User Contributed Perl Documentation CME(1)
2
6 cme - Check or edit configuration data with Config::Model
7
9 version 1.038
10
12 # general synopsis
13 cme [ global_options ] command application [ options ] [ file ] [ modification_instructions ]
14 # edit dpkg config with GUI (and Config::Model::Dpkg)
16 cme edit dpkg
17 # read data from arbitrary file (for model read from alternate file)
19 cme check dpkg-copyright -file path/to/file
20 # edit /etc/sshd_config (with Config::Model::OpenSsh)
22 sudo cme edit sshd
23 # edit ~/.ssh/config (with Config::Model::OpenSsh)
25 cme edit ssh
26 # just check the validity of a file. Both commands are equivalent
28 cme check multistrap file.conf
29 cme check multistrap -file file.conf
30 # check dpkg files, update deprecated parameters and save
32 cme migrate dpkg
33 # like migrate, but also apply all suggested fixes
35 cme fix dpkg
36 # modify configuration with command line
38 cme modify dpkg source 'format="(3.0) quilt"'
39 # likewise with an application that accepts file override
41 cme modify dpkg-copyright 'Comment="Modified with cme"'
42 # edit a file (file name specification is mandatory here)
44 cme edit multistrap my.conf
45 # map conf data to a fuse file system
47 cme fusefs multistrap my.conf -d fuse_dir
48 # likewise for dpkg data
50 cme fusefs dpkg -d fuse_dir
51 # list all available applications (depends on your installation)
53 cme list
54
56 Depending on the command described below, "cme" program will use
57 Config::Model configuration descriptions to check or modify or fix
58 configuration files.
59 The 3rd parameter specify the application you want to work on. Most of
61 the time, the relevant configuration file(s) will be found by cme. This
62 is the most simple case. For instance:
63 sudo cme check popcon
65 Some application like "multistrap" have no constraint on the
67 configuration file name and will require you to specify your
68 configuration file name:
69 cme check multistrap raspbian.conf
71 or
73 cme check multistrap -file raspbian.conf
75
77 The configuration of an application can take different forms. Either
78 several files (like debian packages), a single file with a predefined
79 file (popcon), or a single file with an arbitrary file name
80 (multistrap).
81 When needed the configuration file name is specified as the 3rd command
83 argument, i.e. "cme command application file_name". This applies if the
84 application requires a configuration file name (like multistrap), or if
85 the application allows configuration file override.
86
88 This section describes the main commands shipped with cme. Other
89 Config::Model extensions can bring more command. Run "cme help" to get
90 the list of available commands on your system.
91 list
93 Show a list all applications where a model is available. This list
94 depends on installed Config::Model modules.
95 edit
97 Edit a configuration. By default, a Tk GUI will be opened If
98 Config::Model::TkUI is installed. See App::Cme::Command::edit.
99 shell
101 Edit the configuration with a shell like interface. See
102 App::Cme::Command::shell.
103 check
105 Checks the content of the configuration file of an application. See
106 App::Cme::Command::check.
107 migrate
109 Update deprecated parameters (old value are saved to new parameters)
110 and save the new configuration. See App::Cme::Command::migrate.
111 fix
113 Migrate data and fix warnings. See App::Cme::Command::fix.
114 modify
116 Modify a configuration file with the values passed on the command line.
117 See App::Cme::Command::modify.
118 update
120 Update the content of the configuration file from external data.
121 Currently, only dpkg-copyright model support update sub command. See
122 App::Cme::Command::update.
123 search
125 Search configuration data for a specific string. See
126 App::Cme::Command::search.
127 fusefs
129 Map the configuration file content to a FUSE virtual file system on a
130 directory specified with option "-fuse-dir". Modifications done in the
131 fuse file system are saved to the configuration file when the
132 "fusermount -u" is run.
133
135 The following options are available for all commands:
136 -create
138 Perform the operation even if the configuration file is missing.
139 This may be used to create a minimal configuration file. This
140 option is disabled by default as a missing configuration file often
141 indicates an error during the installation of the application.
142 -file
144 For model that support it, specify an alternate file to read and
145 write the configuration.
146 You can use this option for model that require the target file to
148 be specified (e.g. multitrap model), but file can in this case be
149 also specified with the 4th command argument. E.g. these 2 commands
150 have the same effect:
151 cme check multistrap foo.conf
153 cme check multistrap -file foo.conf
154 -force-load
156 Load file even if error are found in data. Bad data are discarded
157 -canonical
159 Write config data back using model order. By default, write items
160 back using the order found in the configuration file. This feature
161 is experimental and not supported by all backends.
162 -backup
164 Create a backup of configuration files before saving. By default,
165 "old" will be appended to the backup file. I.e. "foo.conf" will be
166 backed up as "foo.conf.old". You can specify an alternate suffix.
167 For instance "-backup dpkg-old".
168 -save
170 Force a save even if no change was done. Useful to reformat the
171 configuration file.
172 -strict
174 When set, cme will exit 1 if warnings are found during check (of
175 left after fix)
176 -verbose
178 Show more information about what's going on.
179 -quiet
181 Suppress all output except error messages.
182
184 -model-dir
185 Specify an alternate directory to find model files. Mostly useful
186 for tests.
187 -root-dir
189 Specify a pseudo root directory to read and write the configuration
190 files. (Actual default directory and file names depends on the
191 model (See "-model" option). For instance, if you specify
192 "~/mytest", the "/etc/ssh/sshd_config" files will be written in
193 "~/mytest/etc/ssh/" directory.
194 -stack-trace
196 Provides a full stack trace when exiting on error.
197 -try-app-as-model
199 When set, try to load a model using directly the application name
200 specified as 3rd parameter on the command line. Experimental.
201
203 You can use cme from another program by using "-ui simple" option. This
204 way you will be able to send command on the standard input of "cme" and
205 get the results from the standard output.
206
208 All Config::Model logging is now based on Log::Log4perl. Logging can
209 be configured in the following files:
210 •
212 ~/.log4config-model
215 •
217 /etc/log4config-model.conf
220 A sample of a ".log4config-model" is provided in contrib directory in
222 "Config::Model" distribution of on github
223 <https://github.com/dod38fr/config-
224 model/blob/master/contrib/log4config-model>
225 Without these files, the following Log4perl config is used:
227 log4perl.rootLogger=WARN, Screen
229 log4perl.logger.Model.Legacy = INFO, SimpleScreen
230 log4perl.additivity.Model.Legacy = 0
231 log4perl.appender.Screen = Log::Log4perl::Appender::Screen
233 log4perl.appender.Screen.stderr = 0
234 log4perl.appender.Screen.layout = Log::Log4perl::Layout::PatternLayout
235 log4perl.appender.Screen.layout.ConversionPattern = %M %m (line %L)%n
236 log4perl.appender.SimpleScreen = Log::Log4perl::Appender::Screen
238 log4perl.appender.SimpleScreen.stderr = 0
239 log4perl.appender.SimpleScreen.layout = Log::Log4perl::Layout::PatternLayout
240 log4perl.appender.SimpleScreen.layout.ConversionPattern = %p: %m%n
241 log4perl.oneMessagePerAppender = 1
243 Log4perl uses the following categories:
245 Anything
247 Anything::Change
248 Trace change notification through configuration tree and instance.
249 Backend
251 Backend::Debian::Dpkg
252 Backend::Debian::Dpkg::Control
253 Backend::Debian::Dpkg::Copyright
254 Backend::Fstab
255 Backend::IniFile
256 Backend::PlainFile
257 Backend::ShellVar
258 Backend::Yaml
259 FuseUI
260 Instance
261 Loader
262 Model::Searcher
263 Tree::Element::CheckList
264 Tree::Element::Id
265 Tree::Element::Id::Hash
266 Tree::Element::Id::List
267 Tree::Element::Value
268 Tree::Element::Value::Dependency
269 Tree::Node
270 Tree::Node::Warped
271 ValueComputer
272 Warper
273 Iterator
274 Model
275 More categories will come.
277
279 cme exits 0 when no errors are found. Exit 1 otherwise.
280
282 Files may be re-ordered
283 "cme" imposes a specific ordering of the parameters of a configuration
284 file. This ordering is derived from the documentation of the
285 configuration, like ssh_confg. "cme" writes back files using this
286 ordering.
287 Thus, the diff between the original configuration files and the new
289 version of the file may be more important than expected when "cme" is
290 used the first time.
291 Comments may be dropped
293 Comments are not supported in some applidations (like the one that use
294 YAML in configuration files). Comments are dropped when using "cme" to
295 edit or modify such files. For more details, see Available backend
296 <https://github.com/dod38fr/config-model/wiki/Available-models-and-
297 backends#Available_backend> page.
298 Configuration models can lag behind the target application
300 If a configuration model is not up-to-date, you will get errors
301 complaining about unknown parameters. In such a case, please file a bug
302 on github <https://github.com/dod38fr/cme-perl/issues> or fix the model
303 and send a pull request. You can see this example from OpenSsh
304 <https://github.com/dod38fr/config-model/wiki/New-parameter-for-
305 openssh-example> to learn how to fix a model.
306
308 For more information, please check:
309 • config-model wiki: <http://github.com/dod38fr/config-model/wiki>
311 • Blogs about this project:
313 <https://ddumont.wordpress.com/category/perl/configmodel/>
314
316 In alphabetical order:
317 Ross Vandegrift
319
321 Feedback from users are highly desired. If you find this module useful,
322 please share your use cases, success stories with the author.
323
325 Config::Model::Model, Config::Model::Instance, Config::Model::Node,
326 Config::Model::HashId, Config::Model::ListId,
327 Config::Model::WarpedNode, Config::Model::Value
328
330 Dominique Dumont
331
333 This software is Copyright (c) 2014-2022 by Dominique Dumont
334 <ddumont@cpan.org>.
335 This is free software, licensed under:
337 The GNU Lesser General Public License, Version 2.1, February 1999
339perl v5.34.0 2022-03-24 CME(1)