dlt-control(1)

1DLT-CONTROL(1)                                                  DLT-CONTROL(1)
2
3
4

NAME

6       dlt-control - Send control messages to DLT Daemon
7

SYNOPSIS

9       dlt-control  [-v]  [-h] [-S] [-R] [-y] [-b baudrate] [-e ecuid] [-a id]
10       [-c id] [-s id] [-m message] [-x message] [-t milliseconds] [-l  level]
11       [-r  tracestatus]  [-d loglevel] [-f tracestatus] [-i enable] [-o] [-g]
12       [-j] [-u] [-p port] hostname/serial_device_name
13

DESCRIPTION

15       Send control messages to DLT Daemon.  This is useful when there  is  no
16       client  (e.g. DLT  Viewer) available.  It supports several control mes‐
17       sages including: - Setting log level/trace level - Setting default  log
18       level/default trace level - Enable timing packets - Store configuration
19       - Reset to factory default - Get logging information
20
21       Note Use -u option instead of hostname/serial_device_name if Unix Sock‐
22       et is used.  See example for detail.
23
24   OPTIONS
25       -v     Verbose mode
26
27       -h     Usage
28
29       -S     Send message with serial header (Default: Without serial header)
30
31       -R     Enable resync serial header
32
33       -y     Serial device mode
34
35       -b     Serial device baudrate (Default: 115200)
36
37       -e     Set ECU ID (Default: RECV)
38
39       -a     Control message application id
40
41       -c     Control message context id
42
43       -s     Control message injection service id
44
45       -m     Control message injection in ASCII
46
47       -x     Control message injection in Hex e.g. `ad 01 24 ef'
48
49       -t     Timeout to terminate application (Default:1000)
50
51       -l
52
53              Set the log level (0=off - 6=verbose, default= -1)
54              supported options:
55                -l level -a apid -c ctid
56                -l level -a abc* (set level for all ctxts of apps name starts with abc)
57                -l level -a apid (set level for all ctxts of this app)
58                -l level -c xyz* (set level for all ctxts whose name starts with xyz)
59                -l level -c ctid (set level for the particular ctxt)
60                -l level (set level for all the registered contexts)
61
62       -r     Set  the  trace status (0=off - 1=on, default=255) supported op‐
63              tions: -r tracestatus -a apid -c ctid  -r  tracestatus  -a  abc*
64              (set  status  for  all  ctxts  of  apps name starts with abc) -r
65              tracestatus -a apid (set status for all ctxts of  this  app)  -r
66              tracestatus  -c xyz* (set status for all ctxts whose name starts
67              with xyz) -r tracestatus -c ctid (set status for the  particular
68              ctxt)  -r  tracestatus  (set  status for all the registered con‐
69              texts)
70
71       -d     Set the default log level (0=off - 5=verbose)
72
73       -f     Set the default trace status (0=off - 1=on)
74
75       -i     Enable timing packets (0=off - 1=on)
76
77       -o     Store configuration
78
79       -g     Reset to factory default
80
81       -j     Get log info
82
83       -u     unix port
84
85       -p     Port for TCP communication (Default: 3490).
86

EXAMPLES

88       Change log level of application “APP1” to DEBUG with unix port dlt-con‐
89       trol -a APP1 -l 5 -u
90
91       Change log level of application “APP1” and context “CON1” to ERROR dlt-
92       control -a APP1 -c CON1 -l 2 localhost
93
94       Get logging information of current running applications with unix  port
95       (IPC: Unix Socket) dlt-control -j -u
96
97       Get logging information of current running applications (IPC:FIFO) dlt-
98       control -j localhost
99

EXIT STATUS

101       Non zero is returned in case of failure.
102

AUTHOR

104       Saya Sugiura (ssugiura (at) jp.adit-jv (dot) com)
105

COPYRIGHT

107       Copyright (C) 2019 Advanced Driver Information  Technology,  Bosch  and
108       DENSO.    License   MPL-2.0:   Mozilla   Public   License  version  2.0
109       http://mozilla.org/MPL/2.0/.
110

BUGS

112       See Github issue: <https://github.com/GENIVI/dlt-daemon/issues>
113