1foo2lava(1)                 General Commands Manual                foo2lava(1)
2
3
4
5
6

NAME

8       foo2lava - Convert Ghostscript pbmraw or bitcmyk format into a LAVAFLOW
9       or a OPL printer stream
10

SYNOPSIS

12       foo2lava [options] <pbmraw-file >lava-file
13
14       foo2lava [options] <bitcmyk-file >lava-file
15
16       foo2lava [options] <pksmraw-file >lava-file
17

DESCRIPTION

19       foo2lava converts Ghostscript pbmraw, bitcmyk, or pksmraw  output  for‐
20       mats  to  monochrome  or color LAVAFLOW or OPL streams, for driving the
21       Konica Minolta magicolor 2530 DL network color laser printer, the  Kon‐
22       ica Minolta magicolor 2480/2480 MF AIO printer, and other Zenographics-
23       based LAVAFLOW printers.
24
25

COMMAND LINE OPTIONS

27   Normal Options
28       These are the options used to select the parameters of a print job that
29       are usually controlled on a per job basis.
30
31       -c     Force color mode if autodetect doesn't work.
32
33       -d duplex
34              Duplex code to send to printer [1].
35              │        │               │
36              │1   off │ 2   long edge │ 3   short edge
37
38       -g xpixxypix
39              Set page dimensions in pixels [10200x6600].
40
41       -m media
42              Media code to send to printer [0].
43
44              ──────────────────────────
45              Media          2530DL
46              ──────────────────────────
47              plain             0
48              transparency      4
49              thick stock      20
50              envelope         22
51              letterhead       23
52              postcard         25
53              labels           26
54              recycled         27
55
56       -p paper
57              Paper code to send to printer [2].
58
59              ┌──────────────────┬─────────────────────┐
60              │  1   executive   │  25   A5            │
61              │  2   letter      │  26   A4            │
62              │  3   legal       │  45   B5jis         │
63              │ 80   env Monarch │  65   B5iso         │
64              │ 81   env #10     │  90   env DL        │
65              │ 91   env C5      │  92   env C6        │
66              │835   4x6" photo  │ 837   10x15cm photo │
67              └──────────────────┴─────────────────────┘
68       -n copies
69              Number of copies [1].
70
71       -r xresxyres
72              Set device resolution in pixels/inch [1200x600].
73
74       -s source
75              Source (InputSlot) code to send to printer [255].
76              │           │
77              │1   Tray 1 │ 255   auto
78              │4   Tray 2 │
79
80       -t     Draft mode.  Every other pixel is white.
81
82       -J filename
83              Filename string to send to printer.
84
85       -U username
86              Username string to send to printer.
87
88   Printer Tweaking Options
89       These are the options used to customize the operation of foo2lava for a
90       particular printer.
91
92       -u xoffxyoff
93              Set the offset of the start of the printable region from the up‐
94              per left corner, in pixels [0x0].
95
96       -l xoffxyoff
97              Set the offset of the end of the printable region from the lower
98              right corner, in pixels [0x0].
99
100       -L mask
101              Send logical clipping amounts implied by -u/-l in  the  LAVAFLOW
102              stream [3].
103
104              0   don't send any logical clipping amounts
105              1   only send Y clipping amount
106              2   only send X clipping amount
107              3   send both X and Y clipping amounts
108
109       -A     AllIsBlack: convert C=1,M=1,Y=1 to just K=1.  Works with bitcmyk
110              input only.
111
112       -B     BlackClears: K=1 forces C,M,Y to 0.  Works  with  bitcmyk  input
113              only.
114
115       -z model
116              Model.  The  default is [0].
117
118              model   protocol   Description
119              0       LAVAFLOW   magicolor 2490 MF
120              0       LAVAFLOW   magicolor 2530 DL
121              1       OPL        magicolor 2480 MF
122              2       LAVAFLOW   magicolor 1600W
123              2       LAVAFLOW   magicolor 1680MF
124              2       LAVAFLOW   magicolor 1690MF
125
126   Debugging Options
127       These options are used for debugging foo2lava.
128
129       -S plane
130              Output just a single color plane from a color print and print it
131              on the black plane.  The default is to output all color planes.
132
133              1   Cyan
134              2   Magenta
135              3   Yellow
136              4   Black
137
138       -D level
139              Set Debug level [0].
140
141

EXAMPLES

143       Create a black and white LAVAFLOW stream:
144
145              gs -q -dBATCH -dSAFER -dQUIET -dNOPAUSE
146                  -sPAPERSIZE=letter -r1200x600 -sDEVICE=pbmraw
147                  -sOutputFile=- - < testpage.ps
148              | foo2lava -r1200x600 -g10200x6600 -p1 >testpage.zm
149
150       Create a color LAVAFLOW stream:
151
152              gs -q -dBATCH -dSAFER -dQUIET -dNOPAUSE
153                  -sPAPERSIZE=letter -g10200x6600 -r1200x600 -sDEVICE=bitcmyk
154                  -sOutputFile=- - < testpage.ps
155              | foo2lava -r1200x600 -g10200x6600 -p1 >testpage.zc
156
157

FILES

159       /usr/bin/foo2lava
160

SEE ALSO

162       foo2lava-wrapper(1), lavadecode(1)
163

AUTHOR

165       Rick Richardson <rick.richardson@comcast.com>
166       http://foo2zjs.rkkda.com/
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
Impressum