1FUSIONINVENTORY-NETDISCUOsVeErRYC(o1n)tributed Perl DocuFmUeSnItOaNtIiNoVnENTORY-NETDISCOVERY(1)
2
3
4

NAME

6       fusioninventory-netdiscovery - Standalone network discovery
7

SYNOPSIS

9       fusioninventory-netdiscovery [options] --first <address> --last
10       <address>
11
12         Options:
13           --first <ADDRESS>      IP range first address
14           --last <ADDRESS>       IP range last address
15           --port <PORT[,PORT2]>  SNMP port (161)
16           --protocol <PROT[,P2]> SNMP protocol/domain (udp/ipv4)
17           --community <STRING>   SNMP community string (public)
18           --credentials <STRING> SNMP credentials (version:1,community:public)
19           --timeout <TIME        SNMP timeout, in seconds (1)
20           --entity <ENTITY>      GLPI entity
21           --threads <COUNT>      number of discovery threads (1)
22           --control              output control messages
23           -i --inventory         chain with netinventory task for discovered devices
24           -s --save <FOLDER>     base folder where to save discovery and inventory xmls
25                                   - netdiscovery xmls will go in <FOLDER>/netdiscovery
26                                   - netinventory xmls will go in <FOLDER>/netinventory
27           --debug                debug output
28           -h --help              print this message and exit
29           --version              print the task version and exit
30

DESCRIPTION

32       fusioninventory-netdiscovery can be used to run a network discovery
33       task without a GLPI server.
34

OPTIONS

36       --first ADDRESS
37           Set the first IP address of the network range to scan.
38
39       --last ADDRESS
40           Set the last IP address of the network range to scan.
41
42       --port PORT[,PORT2]
43           List of ports to try, defaults to: 161
44
45           Set it to 161,16100 to first try on default port and then on 16100.
46
47       --protocol PROTOCOL[,PROTOCOL2]
48           List of protocols to try, defaults to: udp/ipv4
49
50           Possible values are: udp/ipv4,udp/ipv6,tcp/ipv4,tcp/ipv6
51
52       --community STRING
53           Use given string as SNMP community (assume SNMPv1).
54
55       --credentials STRING
56           Use given string as SNMP credentials specification. This
57           specification is a comma-separated list of key:value authentication
58           parameters, such as:
59
60           •   version:2c,community:public
61
62           •   version:3,username:admin,authprotocol:sha,authpassword:s3cr3t
63
64           •   etc.
65
66       --timeout TIME
67           Set SNMP timeout, in seconds.
68
69       --entity ENTITY
70           Set GLPI entity.
71
72       --threads COUNT
73           Use given number of inventory threads.
74
75       --control
76           Output server-agent control messages, in addition to inventory
77           result itself.
78
79       --debug
80           Turn the debug mode on. Multiple usage allowed, for additional
81           verbosity.
82

EXAMPLES

84       Run a discovery against a network range, using SNMP version 1:
85
86           $> fusioninventory-netdiscovery --first 192.168.0.1 --last 192.168.0.254 \
87           --community public
88
89       Run a discovery against a network range, using multiple SNMP
90       credentials:
91
92           $> fusioninventory-netdiscovery --first 192.168.0.1 --last 192.168.0.254 \
93           --credentials version:2c,community:public \
94           --credentials version:3,username:admin,authprotocol:sha,authpassword:s3cr3t
95
96
97
98perl v5.36.0                      2022-07-21   FUSIONINVENTORY-NETDISCOVERY(1)
Impressum