1libinput-analyze-touch-down-sGteanteer(a1l)CommandlsibMiannpuuatl-analyze-touch-down-state(1)
2
3
4

NAME

6       libinput-analyze-touch-down-state - analyze the touch states
7

SYNOPSIS

9       libinput analyze touch-down-state [--help] [options] recording.yml
10

DESCRIPTION

12       The  libinput  analyze touch-downte tool analyzes a recording made with
13       libinput record and prints "down" state of each touch. This  tool  aids
14       with the detection of stuck touches.
15
16       This  is  a  debugging tool only, its output may change at any time. Do
17       not rely on the output.
18

OPTIONS

20       --help  Print help
21
22       --use-st
23               Use the single-touch BTN_TOOL_ bits instead of the slot  state.
24               The  output  will  only  show  the "highest" finger down at any
25               time. For examples, where two fingers are down, only the second
26               slot will be marked as down.
27

OUTPUT

29       An example output for a two-finger alternating sequence below.
30
31         6.140281 +1062ms: x | x
32         7.410377 +1257ms:   | x
33         7.420200    +9ms:   |
34        11.233108 +3812ms: x | x
35        11.245721   +12ms: x | x
36        11.850206  +604ms:   |
37        13.827740 +1977ms: x |
38        13.839723   +11ms: x |
39        14.704027  +864ms: x | x
40        14.716691   +12ms: x | x
41

LIBINPUT

43       Part of the libinput(1) suite
44
45
46
47                                          libinput-analyze-touch-down-state(1)