1QucsAttenuator(1)                User Commands               QucsAttenuator(1)
2
3
4

NAME

6       QucsAttenuator - An attenuator synthesis application.
7

SYNOPSIS

9       qucsattenuator [OPTION] ...
10

DESCRIPTION

12       Qucs is an integrated circuit simulator which means you will be able to
13       setup a circuit with a graphical user interface (GUI) and simulate  the
14       large-signal,  small-signal  and noise behaviour of the circuit.  After
15       that simulation has finished you will be able to present the simulation
16       results on a presentation page or window.
17
18       The  software  aims  to  support all kinds of circuit simulation types,
19       e.g. DC, AC, S-parameter, harmonic balance  analysis,  noise  analysis,
20       etc.
21
22       QucsAttenuator  is  the attenuator synthesis tool used by Qucs.  By use
23       of an input dialog the user can create  an  attenuator  which  is  then
24       copied into the system-wide clipboard.  In Qucs the user opens an empty
25       schematic and presses CTRL-V (paste  from  clipboard).  The  attenuator
26       schematic is now inserted and can be simulated.
27
28       Available attenuator topologies types are: Tee, Pi and Bridged-Tee.
29
30

AVAILABILITY

32       The   latest   version   of   Qucs   can   always   be   obtained  from
33       https://sf.net/p/qucs
34

REPORTING BUGS

36       Known bugs are documented within the BUGS file.  Report bugs  to  qucs-
37       bugs@lists.sourceforge.net
38
40       Copyright © 2006 Michael Margraf <michael.margraf@alumni.tu-berlin.de>
41
42       This is free software; see the source for copying conditions.  There is
43       NO warranty; not even for MERCHANTABILITY or FITNESS FOR  A  PARTICULAR
44       PURPOSE.
45

AUTHORS

47       Written  by  Toyoyuki Ishikawa <toyoishi@gmail.com> and Michael Margraf
48       <michael.margraf@alumni.tu-berlin.de>.
49
50
51
52Debian/GNU Linux                   July 2006                 QucsAttenuator(1)
Impressum