1OSSL_SELF_TEST_NEW(3ossl) OpenSSL OSSL_SELF_TEST_NEW(3ossl)
2
3
4
6 OSSL_SELF_TEST_new, OSSL_SELF_TEST_free, OSSL_SELF_TEST_onbegin,
7 OSSL_SELF_TEST_oncorrupt_byte, OSSL_SELF_TEST_onend - functionality to
8 trigger a callback during a self test
9
11 #include <openssl/self_test.h>
12
13 OSSL_SELF_TEST *OSSL_SELF_TEST_new(OSSL_CALLBACK *cb, void *cbarg);
14 void OSSL_SELF_TEST_free(OSSL_SELF_TEST *st);
15
16 void OSSL_SELF_TEST_onbegin(OSSL_SELF_TEST *st, const char *type,
17 const char *desc);
18 int OSSL_SELF_TEST_oncorrupt_byte(OSSL_SELF_TEST *st, unsigned char *bytes);
19 void OSSL_SELF_TEST_onend(OSSL_SELF_TEST *st, int ret);
20
22 These methods are intended for use by provider implementors, to display
23 diagnostic information during self testing.
24
25 OSSL_SELF_TEST_new() allocates an opaque OSSL_SELF_TEST object that has
26 a callback and callback argument associated with it.
27
28 The callback cb may be triggered multiple times by a self test to
29 indicate different phases.
30
31 OSSL_SELF_TEST_free() frees the space allocated by
32 OSSL_SELF_TEST_new().
33
34 OSSL_SELF_TEST_onbegin() may be inserted at the start of a block of
35 self test code. It can be used for diagnostic purposes. If this method
36 is called the callback cb will receive the following OSSL_PARAM object.
37
38 "st-phase" (OSSL_PROV_PARAM_SELF_TEST_PHASE) <UTF8 string>
39 The value is the string "Start"
40
41 OSSL_SELF_TEST_oncorrupt_byte() may be inserted just after the known
42 answer is calculated, but before the self test compares the result. The
43 first byte in the passed in array of bytes will be corrupted if the
44 callback returns 0, otherwise it leaves the array unaltered. It can be
45 used for failure testing. The type and desc can be used to identify an
46 individual self test to target for failure testing. If this method is
47 called the callback cb will receive the following OSSL_PARAM object.
48
49 "st-phase" (OSSL_PROV_PARAM_SELF_TEST_PHASE) <UTF8 string>
50 The value is the string "Corrupt"
51
52 OSSL_SELF_TEST_onend() may be inserted at the end of a block of self
53 test code just before cleanup to indicate if the test passed or failed.
54 It can be used for diagnostic purposes. If this method is called the
55 callback cb will receive the following OSSL_PARAM object.
56
57 "st-phase" (OSSL_PROV_PARAM_SELF_TEST_PHASE) <UTF8 string>
58 The value of the string is "Pass" if ret is non zero, otherwise it
59 has the value "Fail".
60
61 After the callback cb has been called the values that were set by
62 OSSL_SELF_TEST_onbegin() for type and desc are set to the value "None".
63
64 If OSSL_SELF_TEST_onbegin(), OSSL_SELF_TEST_oncorrupt_byte() or
65 OSSL_SELF_TEST_onend() is called the following additional OSSL_PARAM
66 are passed to the callback.
67
68 "st-type" (OSSL_PROV_PARAM_SELF_TEST_TYPE) <UTF8 string>
69 The value is setup by the type passed to OSSL_SELF_TEST_onbegin().
70 This allows the callback to identify the type of test being run.
71
72 "st-desc" (OSSL_PROV_PARAM_SELF_TEST_DESC) <UTF8 string>
73 The value is setup by the type passed to OSSL_SELF_TEST_onbegin().
74 This allows the callback to identify the sub category of the test
75 being run.
76
78 OSSL_SELF_TEST_new() returns the allocated OSSL_SELF_TEST object, or
79 NULL if it fails.
80
81 OSSL_SELF_TEST_oncorrupt_byte() returns 1 if corruption occurs,
82 otherwise it returns 0.
83
85 A single self test could be set up in the following way:
86
87 OSSL_SELF_TEST *st = NULL;
88 OSSL_CALLBACK *cb;
89 void *cbarg;
90 int ok = 0;
91 unsigned char out[EVP_MAX_MD_SIZE];
92 unsigned int out_len = 0;
93 EVP_MD_CTX *ctx = EVP_MD_CTX_new();
94 EVP_MD *md = EVP_MD_fetch(libctx, t->algorithm, NULL);
95
96 /*
97 * Retrieve the callback - will be NULL if not set by the application via
98 * OSSL_SELF_TEST_set_callback().
99 */
100 OSSL_SELF_TEST_get_callback(libctx, &cb, &cbarg);
101
102 st = OSSL_SELF_TEST_new(cb, cb_arg);
103
104 /* Trigger the optional callback */
105 OSSL_SELF_TEST_onbegin(st, OSSL_SELF_TEST_TYPE_KAT_DIGEST,
106 OSSL_SELF_TEST_DESC_MD_SHA2);
107
108 if (!EVP_DigestInit_ex(ctx, md, NULL)
109 || !EVP_DigestUpdate(ctx, pt, pt_len)
110 || !EVP_DigestFinal(ctx, out, &out_len))
111 goto err;
112
113 /* Optional corruption - If the application callback returns 0 */
114 OSSL_SELF_TEST_oncorrupt_byte(st, out);
115
116 if (out_len != t->expected_len
117 || memcmp(out, t->expected, out_len) != 0)
118 goto err;
119 ok = 1;
120 err:
121 OSSL_SELF_TEST_onend(st, ok);
122 EVP_MD_free(md);
123 EVP_MD_CTX_free(ctx);
124
125 Multiple self test's can be set up in a similar way by repeating the
126 pattern of OSSL_SELF_TEST_onbegin(), OSSL_SELF_TEST_oncorrupt_byte(),
127 OSSL_SELF_TEST_onend() for each test.
128
130 OSSL_SELF_TEST_set_callback(3), openssl-core.h(7),
131 OSSL_PROVIDER-FIPS(7)
132
134 The functions described here were added in OpenSSL 3.0.
135
137 Copyright 2020 The OpenSSL Project Authors. All Rights Reserved.
138
139 Licensed under the Apache License 2.0 (the "License"). You may not use
140 this file except in compliance with the License. You can obtain a copy
141 in the file LICENSE in the source distribution or at
142 <https://www.openssl.org/source/license.html>.
143
144
145
1463.0.5 2022-11-01 OSSL_SELF_TEST_NEW(3ossl)