1Archive::Zip(3) User Contributed Perl Documentation Archive::Zip(3)
2
6 Archive::Zip - Provide an interface to ZIP archive files.
7
9 # Create a Zip file
10 use Archive::Zip qw( :ERROR_CODES :CONSTANTS );
11 my $zip = Archive::Zip->new();
12 # Add a directory
14 my $dir_member = $zip->addDirectory( 'dirname/' );
15 # Add a file from a string with compression
17 my $string_member = $zip->addString( 'This is a test', 'stringMember.txt' );
18 $string_member->desiredCompressionMethod( COMPRESSION_DEFLATED );
19 # Add a file from disk
21 my $file_member = $zip->addFile( 'xyz.pl', 'AnotherName.pl' );
22 # Save the Zip file
24 unless ( $zip->writeToFileNamed('someZip.zip') == AZ_OK ) {
25 die 'write error';
26 }
27 # Read a Zip file
29 my $somezip = Archive::Zip->new();
30 unless ( $somezip->read( 'someZip.zip' ) == AZ_OK ) {
31 die 'read error';
32 }
33 # Change the compression type for a file in the Zip
35 my $member = $somezip->memberNamed( 'stringMember.txt' );
36 $member->desiredCompressionMethod( COMPRESSION_STORED );
37 unless ( $zip->writeToFileNamed( 'someOtherZip.zip' ) == AZ_OK ) {
38 die 'write error';
39 }
40
42 The Archive::Zip module allows a Perl program to create, manipulate,
43 read, and write Zip archive files.
44 Zip archives can be created, or you can read from existing zip files.
46 Once created, they can be written to files, streams, or strings.
48 Members can be added, removed, extracted, replaced, rearranged, and
49 enumerated. They can also be renamed or have their dates, comments, or
50 other attributes queried or modified. Their data can be compressed or
51 uncompressed as needed.
52 Members can be created from members in existing Zip files, or from
54 existing directories, files, or strings.
55 This module uses the Compress::Raw::Zlib library to read and write the
57 compressed streams inside the files.
58 One can use Archive::Zip::MemberRead to read the zip file archive
60 members as if they were files.
61 File Naming
63 Regardless of what your local file system uses for file naming, names
64 in a Zip file are in Unix format (forward slashes (/) separating
65 directory names, etc.).
66 "Archive::Zip" tries to be consistent with file naming conventions, and
68 will translate back and forth between native and Zip file names.
69 However, it can't guess which format names are in. So two rules control
71 what kind of file name you must pass various routines:
72 Names of files are in local format.
74 "File::Spec" and "File::Basename" are used for various file
75 operations. When you're referring to a file on your system, use its
76 file naming conventions.
77 Names of archive members are in Unix format.
79 This applies to every method that refers to an archive member, or
80 provides a name for new archive members. The "extract()" methods
81 that can take one or two names will convert from local to zip names
82 if you call them with a single name.
83 Archive::Zip Object Model
85 Overview
86 Archive::Zip::Archive objects are what you ordinarily deal with. These
88 maintain the structure of a zip file, without necessarily holding data.
89 When a zip is read from a disk file, the (possibly compressed) data
90 still lives in the file, not in memory. Archive members hold
91 information about the individual members, but not (usually) the actual
92 member data. When the zip is written to a (different) file, the member
93 data is compressed or copied as needed. It is possible to make archive
94 members whose data is held in a string in memory, but this is not done
95 when a zip file is read. Directory members don't have any data.
96 Inheritance
98 Exporter
99 Archive::Zip Common base class, has defs.
100 Archive::Zip::Archive A Zip archive.
101 Archive::Zip::Member Abstract superclass for all members.
102 Archive::Zip::StringMember Member made from a string
103 Archive::Zip::FileMember Member made from an external file
104 Archive::Zip::ZipFileMember Member that lives in a zip file
105 Archive::Zip::NewFileMember Member whose data is in a file
106 Archive::Zip::DirectoryMember Member that is a directory
107
109 :CONSTANTS
110 Exports the following constants:
111 FA_MSDOS FA_UNIX GPBF_ENCRYPTED_MASK
113 GPBF_DEFLATING_COMPRESSION_MASK GPBF_HAS_DATA_DESCRIPTOR_MASK
114 COMPRESSION_STORED COMPRESSION_DEFLATED IFA_TEXT_FILE_MASK
115 IFA_TEXT_FILE IFA_BINARY_FILE COMPRESSION_LEVEL_NONE
116 COMPRESSION_LEVEL_DEFAULT COMPRESSION_LEVEL_FASTEST
117 COMPRESSION_LEVEL_BEST_COMPRESSION ZIP64_SUPPORTED ZIP64_AS_NEEDED
118 ZIP64_EOCD ZIP64_HEADERS
119 :MISC_CONSTANTS
121 Exports the following constants (only necessary for extending the
122 module):
123 FA_AMIGA FA_VAX_VMS FA_VM_CMS FA_ATARI_ST FA_OS2_HPFS FA_MACINTOSH
125 FA_Z_SYSTEM FA_CPM FA_WINDOWS_NTFS
126 GPBF_IMPLODING_8K_SLIDING_DICTIONARY_MASK
127 GPBF_IMPLODING_3_SHANNON_FANO_TREES_MASK
128 GPBF_IS_COMPRESSED_PATCHED_DATA_MASK COMPRESSION_SHRUNK
129 DEFLATING_COMPRESSION_NORMAL DEFLATING_COMPRESSION_MAXIMUM
130 DEFLATING_COMPRESSION_FAST DEFLATING_COMPRESSION_SUPER_FAST
131 COMPRESSION_REDUCED_1 COMPRESSION_REDUCED_2 COMPRESSION_REDUCED_3
132 COMPRESSION_REDUCED_4 COMPRESSION_IMPLODED COMPRESSION_TOKENIZED
133 COMPRESSION_DEFLATED_ENHANCED
134 COMPRESSION_PKWARE_DATA_COMPRESSION_LIBRARY_IMPLODED
135 :ERROR_CODES
137 Explained below. Returned from most methods.
138 AZ_OK AZ_STREAM_END AZ_ERROR AZ_FORMAT_ERROR AZ_IO_ERROR
140
142 Many of the methods in Archive::Zip return error codes. These are
143 implemented as inline subroutines, using the "use constant" pragma.
144 They can be imported into your namespace using the ":ERROR_CODES" tag:
145 use Archive::Zip qw( :ERROR_CODES );
147 ...
149 unless ( $zip->read( 'myfile.zip' ) == AZ_OK ) {
151 die "whoops!";
152 }
153 AZ_OK (0)
155 Everything is fine.
156 AZ_STREAM_END (1)
158 The read stream (or central directory) ended normally.
159 AZ_ERROR (2)
161 There was some generic kind of error.
162 AZ_FORMAT_ERROR (3)
164 There is a format error in a ZIP file being read.
165 AZ_IO_ERROR (4)
167 There was an IO error.
168 Compression
170 Archive::Zip allows each member of a ZIP file to be compressed (using
171 the Deflate algorithm) or uncompressed.
172 Other compression algorithms that some versions of ZIP have been able
174 to produce are not supported. Each member has two compression methods:
175 the one it's stored as (this is always COMPRESSION_STORED for string
176 and external file members), and the one you desire for the member in
177 the zip file.
178 These can be different, of course, so you can make a zip member that is
180 not compressed out of one that is, and vice versa.
181 You can inquire about the current compression and set the desired
183 compression method:
184 my $member = $zip->memberNamed( 'xyz.txt' );
186 $member->compressionMethod(); # return current compression
187 # set to read uncompressed
189 $member->desiredCompressionMethod( COMPRESSION_STORED );
190 # set to read compressed
192 $member->desiredCompressionMethod( COMPRESSION_DEFLATED );
193 There are two different compression methods:
195 COMPRESSION_STORED
197 File is stored (no compression)
198 COMPRESSION_DEFLATED
200 File is Deflated
201 Compression Levels
203 If a member's desiredCompressionMethod is COMPRESSION_DEFLATED, you can
204 choose different compression levels. This choice may affect the speed
205 of compression and decompression, as well as the size of the compressed
206 member data.
207 $member->desiredCompressionLevel( 9 );
209 The levels given can be:
211 • 0 or COMPRESSION_LEVEL_NONE
213 This is the same as saying
215 $member->desiredCompressionMethod( COMPRESSION_STORED );
217 • 1 .. 9
219 1 gives the best speed and worst compression, and 9 gives the best
221 compression and worst speed.
222 • COMPRESSION_LEVEL_FASTEST
224 This is a synonym for level 1.
226 • COMPRESSION_LEVEL_BEST_COMPRESSION
228 This is a synonym for level 9.
230 • COMPRESSION_LEVEL_DEFAULT
232 This gives a good compromise between speed and compression, and is
234 currently equivalent to 6 (this is in the zlib code). This is the
235 level that will be used if not specified.
236
238 The Archive::Zip class (and its invisible subclass
239 Archive::Zip::Archive) implement generic zip file functionality.
240 Creating a new Archive::Zip object actually makes an
241 Archive::Zip::Archive object, but you don't have to worry about this
242 unless you're subclassing.
243 Constructor
245 new( [$fileName] )
246 new( { filename => $fileName } )
247 Make a new, empty zip archive.
248 my $zip = Archive::Zip->new();
250 If an additional argument is passed, new() will call read() to read
252 the contents of an archive:
253 my $zip = Archive::Zip->new( 'xyz.zip' );
255 If a filename argument is passed and the read fails for any reason,
257 new will return undef. For this reason, it may be better to call
258 read separately.
259 Zip Archive Utility Methods
261 These Archive::Zip methods may be called as functions or as object
262 methods. Do not call them as class methods:
263 $zip = Archive::Zip->new();
265 $crc = Archive::Zip::computeCRC32( 'ghijkl' ); # OK
266 $crc = $zip->computeCRC32( 'ghijkl' ); # also OK
267 $crc = Archive::Zip->computeCRC32( 'ghijkl' ); # NOT OK
268 Archive::Zip::computeCRC32( $string [, $crc] )
270 Archive::Zip::computeCRC32( { string => $string [, checksum => $crc ] }
271 )
272 This is a utility function that uses the Compress::Raw::Zlib CRC
273 routine to compute a CRC-32. You can get the CRC of a string:
274 $crc = Archive::Zip::computeCRC32( $string );
276 Or you can compute the running CRC:
278 $crc = 0;
280 $crc = Archive::Zip::computeCRC32( 'abcdef', $crc );
281 $crc = Archive::Zip::computeCRC32( 'ghijkl', $crc );
282 Archive::Zip::setChunkSize( $number )
284 Archive::Zip::setChunkSize( { chunkSize => $number } )
285 Report or change chunk size used for reading and writing. This can
286 make big differences in dealing with large files. Currently, this
287 defaults to 32K. This also changes the chunk size used for
288 Compress::Raw::Zlib. You must call setChunkSize() before reading or
289 writing. This is not exportable, so you must call it like:
290 Archive::Zip::setChunkSize( 4096 );
292 or as a method on a zip (though this is a global setting). Returns
294 old chunk size.
295 Archive::Zip::chunkSize()
297 Returns the current chunk size:
298 my $chunkSize = Archive::Zip::chunkSize();
300 Archive::Zip::setErrorHandler( \&subroutine )
302 Archive::Zip::setErrorHandler( { subroutine => \&subroutine } )
303 Change the subroutine called with error strings. This defaults to
304 \&Carp::carp, but you may want to change it to get the error
305 strings. This is not exportable, so you must call it like:
306 Archive::Zip::setErrorHandler( \&myErrorHandler );
308 If myErrorHandler is undef, resets handler to default. Returns old
310 error handler. Note that if you call Carp::carp or a similar
311 routine or if you're chaining to the default error handler from
312 your error handler, you may want to increment the number of caller
313 levels that are skipped (do not just set it to a number):
314 $Carp::CarpLevel++;
316 Archive::Zip::tempFile( [ $tmpdir ] )
318 Archive::Zip::tempFile( { tempDir => $tmpdir } )
319 Create a uniquely named temp file. It will be returned open for
320 read/write. If $tmpdir is given, it is used as the name of a
321 directory to create the file in. If not given, creates the file
322 using "File::Spec::tmpdir()". Generally, you can override this
323 choice using the
324 $ENV{TMPDIR}
326 environment variable. But see the File::Spec documentation for your
328 system. Note that on many systems, if you're running in taint mode,
329 then you must make sure that $ENV{TMPDIR} is untainted for it to be
330 used. Will NOT create $tmpdir if it does not exist (this is a
331 change from prior versions!). Returns file handle and name:
332 my ($fh, $name) = Archive::Zip::tempFile();
334 my ($fh, $name) = Archive::Zip::tempFile('myTempDir');
335 my $fh = Archive::Zip::tempFile(); # if you don't need the name
336 Zip Archive Accessors
338 members()
339 Return a copy of the members array
340 my @members = $zip->members();
342 numberOfMembers()
344 Return the number of members I have
345 memberNames()
347 Return a list of the (internal) file names of the zip members
348 memberNamed( $string )
350 memberNamed( { zipName => $string } )
351 Return ref to member whose filename equals given filename or undef.
352 $string must be in Zip (Unix) filename format.
353 membersMatching( $regex )
355 membersMatching( { regex => $regex } )
356 Return array of members whose filenames match given regular
357 expression in list context. Returns number of matching members in
358 scalar context.
359 my @textFileMembers = $zip->membersMatching( '.*\.txt' );
361 # or
362 my $numberOfTextFiles = $zip->membersMatching( '.*\.txt' );
363 zip64()
365 Returns whether the previous read or write of the archive has been
366 done in zip64 format.
367 desiredZip64Mode()
369 Gets or sets which parts of the archive should be written in zip64
370 format: All parts as needed (ZIP64_AS_NEEDED), the default, force
371 writing the zip64 end of central directory record (ZIP64_EOCD),
372 force writing the zip64 EOCD record and all headers in zip64 format
373 (ZIP64_HEADERS).
374 versionMadeBy()
376 versionNeededToExtract()
377 Gets the fields from the zip64 end of central directory record.
378 These are always 0 if the archive is not in zip64 format.
379 diskNumber()
381 Return the disk that I start on. Not used for writing zips, but
382 might be interesting if you read a zip in. This should be 0, as
383 Archive::Zip does not handle multi-volume archives.
384 diskNumberWithStartOfCentralDirectory()
386 Return the disk number that holds the beginning of the central
387 directory. Not used for writing zips, but might be interesting if
388 you read a zip in. This should be 0, as Archive::Zip does not
389 handle multi-volume archives.
390 numberOfCentralDirectoriesOnThisDisk()
392 Return the number of CD structures in the zipfile last read in.
393 Not used for writing zips, but might be interesting if you read a
394 zip in.
395 numberOfCentralDirectories()
397 Return the number of CD structures in the zipfile last read in.
398 Not used for writing zips, but might be interesting if you read a
399 zip in.
400 centralDirectorySize()
402 Returns central directory size, as read from an external zip file.
403 Not used for writing zips, but might be interesting if you read a
404 zip in.
405 centralDirectoryOffsetWRTStartingDiskNumber()
407 Returns the offset into the zip file where the CD begins. Not used
408 for writing zips, but might be interesting if you read a zip in.
409 zipfileComment( [ $string ] )
411 zipfileComment( [ { comment => $string } ] )
412 Get or set the zipfile comment. Returns the old comment.
413 print $zip->zipfileComment();
415 $zip->zipfileComment( 'New Comment' );
416 eocdOffset()
418 Returns the (unexpected) number of bytes between where the EOCD was
419 found and where it expected to be. This is normally 0, but would be
420 positive if something (a virus, perhaps) had added bytes somewhere
421 before the EOCD. Not used for writing zips, but might be
422 interesting if you read a zip in. Here is an example of how you can
423 diagnose this:
424 my $zip = Archive::Zip->new('somefile.zip');
426 if ($zip->eocdOffset())
427 {
428 warn "A virus has added ", $zip->eocdOffset, " bytes of garbage\n";
429 }
430 The "eocdOffset()" is used to adjust the starting position of
432 member headers, if necessary.
433 fileName()
435 Returns the name of the file last read from. If nothing has been
436 read yet, returns an empty string; if read from a file handle,
437 returns the handle in string form.
438 Zip Archive Member Operations
440 Various operations on a zip file modify members. When a member is
441 passed as an argument, you can either use a reference to the member
442 itself, or the name of a member. Of course, using the name requires
443 that names be unique within a zip (this is not enforced).
444 removeMember( $memberOrName )
446 removeMember( { memberOrZipName => $memberOrName } )
447 Remove and return the given member, or match its name and remove
448 it. Returns undef if member or name does not exist in this Zip. No-
449 op if member does not belong to this zip.
450 replaceMember( $memberOrName, $newMember )
452 replaceMember( { memberOrZipName => $memberOrName, newMember =>
453 $newMember } )
454 Remove and return the given member, or match its name and remove
455 it. Replace with new member. Returns undef if member or name does
456 not exist in this Zip, or if $newMember is undefined.
457 It is an (undiagnosed) error to provide a $newMember that is a
459 member of the zip being modified.
460 my $member1 = $zip->removeMember( 'xyz' );
462 my $member2 = $zip->replaceMember( 'abc', $member1 );
463 # now, $member2 (named 'abc') is not in $zip,
464 # and $member1 (named 'xyz') is, having taken $member2's place.
465 extractMember( $memberOrName [, $extractedName ] )
467 extractMember( { memberOrZipName => $memberOrName [, name =>
468 $extractedName ] } )
469 Extract the given member, or match its name and extract it.
470 Returns undef if member does not exist in this Zip. If optional
471 second arg is given, use it as the name of the extracted member.
472 Otherwise, the internal filename of the member is used as the name
473 of the extracted file or directory. If you pass $extractedName, it
474 should be in the local file system's format. If you do not pass
475 $extractedName and the internal filename traverses a parent
476 directory or a symbolic link, the extraction will be aborted with
477 "AC_ERROR" for security reason. All necessary directories will be
478 created. Returns "AZ_OK" on success.
479 extractMemberWithoutPaths( $memberOrName [, $extractedName ] )
481 extractMemberWithoutPaths( { memberOrZipName => $memberOrName [, name
482 => $extractedName ] } )
483 Extract the given member, or match its name and extract it. Does
484 not use path information (extracts into the current directory).
485 Returns undef if member does not exist in this Zip. If optional
486 second arg is given, use it as the name of the extracted member
487 (its paths will be deleted too). Otherwise, the internal filename
488 of the member (minus paths) is used as the name of the extracted
489 file or directory. Returns "AZ_OK" on success. If you do not pass
490 $extractedName and the internal filename is equalled to a local
491 symbolic link, the extraction will be aborted with "AC_ERROR" for
492 security reason.
493 addMember( $member )
495 addMember( { member => $member } )
496 Append a member (possibly from another zip file) to the zip file.
497 Returns the new member. Generally, you will use addFile(),
498 addDirectory(), addFileOrDirectory(), addString(), or read() to add
499 members.
500 # Move member named 'abc' to end of zip:
502 my $member = $zip->removeMember( 'abc' );
503 $zip->addMember( $member );
504 updateMember( $memberOrName, $fileName )
506 updateMember( { memberOrZipName => $memberOrName, name => $fileName } )
507 Update a single member from the file or directory named $fileName.
508 Returns the (possibly added or updated) member, if any; "undef" on
509 errors. The comparison is based on "lastModTime()" and (in the
510 case of a non-directory) the size of the file.
511 addFile( $fileName [, $newName, $compressionLevel ] )
513 addFile( { filename => $fileName [, zipName => $newName,
514 compressionLevel => $compressionLevel } ] )
515 Append a member whose data comes from an external file, returning
516 the member or undef. The member will have its file name set to the
517 name of the external file, and its desiredCompressionMethod set to
518 COMPRESSION_DEFLATED. The file attributes and last modification
519 time will be set from the file. If the name given does not
520 represent a readable plain file or symbolic link, undef will be
521 returned. $fileName must be in the format required for the local
522 file system. The optional $newName argument sets the internal file
523 name to something different than the given $fileName. $newName, if
524 given, must be in Zip name format (i.e. Unix). The text mode bit
525 will be set if the contents appears to be text (as returned by the
526 "-T" perl operator).
527 NOTE that you should not (generally) use absolute path names in zip
529 member names, as this will cause problems with some zip tools as
530 well as introduce a security hole and make the zip harder to use.
531 addDirectory( $directoryName [, $fileName ] )
533 addDirectory( { directoryName => $directoryName [, zipName => $fileName
534 ] } )
535 Append a member created from the given directory name. The
536 directory name does not have to name an existing directory. If the
537 named directory exists, the file modification time and permissions
538 are set from the existing directory, otherwise they are set to now
539 and permissive default permissions. $directoryName must be in
540 local file system format. The optional second argument sets the
541 name of the archive member (which defaults to $directoryName). If
542 given, it must be in Zip (Unix) format. Returns the new member.
543 addFileOrDirectory( $name [, $newName, $compressionLevel ] )
545 addFileOrDirectory( { name => $name [, zipName => $newName,
546 compressionLevel => $compressionLevel ] } )
547 Append a member from the file or directory named $name. If $newName
548 is given, use it for the name of the new member. Will add or
549 remove trailing slashes from $newName as needed. $name must be in
550 local file system format. The optional second argument sets the
551 name of the archive member (which defaults to $name). If given, it
552 must be in Zip (Unix) format.
553 addString( $stringOrStringRef, $name, [$compressionLevel] )
555 addString( { string => $stringOrStringRef [, zipName => $name,
556 compressionLevel => $compressionLevel ] } )
557 Append a member created from the given string or string reference.
558 The name is given by the second argument. Returns the new member.
559 The last modification time will be set to now, and the file
560 attributes will be set to permissive defaults.
561 my $member = $zip->addString( 'This is a test', 'test.txt' );
563 contents( $memberOrMemberName [, $newContents ] )
565 contents( { memberOrZipName => $memberOrMemberName [, contents =>
566 $newContents ] } )
567 Returns the uncompressed data for a particular member, or undef.
568 print "xyz.txt contains " . $zip->contents( 'xyz.txt' );
570 Also can change the contents of a member:
572 $zip->contents( 'xyz.txt', 'This is the new contents' );
574 If called expecting an array as the return value, it will include
576 the status as the second value in the array.
577 ($content, $status) = $zip->contents( 'xyz.txt');
579 Zip Archive I/O operations
581 A Zip archive can be written to a file or file handle, or read from
582 one.
583 writeToFileNamed( $fileName )
585 writeToFileNamed( { fileName => $fileName } )
586 Write a zip archive to named file. Returns "AZ_OK" on success.
587 my $status = $zip->writeToFileNamed( 'xx.zip' );
589 die "error somewhere" if $status != AZ_OK;
590 Note that if you use the same name as an existing zip file that you
592 read in, you will clobber ZipFileMembers. So instead, write to a
593 different file name, then delete the original. If you use the
594 "overwrite()" or "overwriteAs()" methods, you can re-write the
595 original zip in this way. $fileName should be a valid file name on
596 your system.
597 writeToFileHandle( $fileHandle [, $seekable] )
599 Write a zip archive to a file handle. Return AZ_OK on success. The
600 optional second arg tells whether or not to try to seek backwards
601 to re-write headers. If not provided, it is set if the Perl "-f"
602 test returns true. This could fail on some operating systems,
603 though.
604 my $fh = IO::File->new( 'someFile.zip', 'w' );
606 unless ( $zip->writeToFileHandle( $fh ) == AZ_OK ) {
607 # error handling
608 }
609 If you pass a file handle that is not seekable (like if you're
611 writing to a pipe or a socket), pass a false second argument:
612 my $fh = IO::File->new( '| cat > somefile.zip', 'w' );
614 $zip->writeToFileHandle( $fh, 0 ); # fh is not seekable
615 If this method fails during the write of a member, that member and
617 all following it will return false from "wasWritten()". See
618 writeCentralDirectory() for a way to deal with this. If you want,
619 you can write data to the file handle before passing it to
620 writeToFileHandle(); this could be used (for instance) for making
621 self-extracting archives. However, this only works reliably when
622 writing to a real file (as opposed to STDOUT or some other possible
623 non-file).
624 See examples/selfex.pl for how to write a self-extracting archive.
626 writeCentralDirectory( $fileHandle [, $offset ] )
628 writeCentralDirectory( { fileHandle => $fileHandle [, offset => $offset
629 ] } )
630 Writes the central directory structure to the given file handle.
631 Returns AZ_OK on success. If given an $offset, will seek to that
633 point before writing. This can be used for recovery in cases where
634 writeToFileHandle or writeToFileNamed returns an IO error because
635 of running out of space on the destination file.
636 You can truncate the zip by seeking backwards and then writing the
638 directory:
639 my $fh = IO::File->new( 'someFile.zip', 'w' );
641 my $retval = $zip->writeToFileHandle( $fh );
642 if ( $retval == AZ_IO_ERROR ) {
643 my @unwritten = grep { not $_->wasWritten() } $zip->members();
644 if (@unwritten) {
645 $zip->removeMember( $member ) foreach my $member ( @unwritten );
646 $zip->writeCentralDirectory( $fh,
647 $unwritten[0]->writeLocalHeaderRelativeOffset());
648 }
649 }
650 overwriteAs( $newName )
652 overwriteAs( { filename => $newName } )
653 Write the zip to the specified file, as safely as possible. This
654 is done by first writing to a temp file, then renaming the original
655 if it exists, then renaming the temp file, then deleting the
656 renamed original if it exists. Returns AZ_OK if successful.
657 overwrite()
659 Write back to the original zip file. See overwriteAs() above. If
660 the zip was not ever read from a file, this generates an error.
661 read( $fileName )
663 read( { filename => $fileName } )
664 Read zipfile headers from a zip file, appending new members.
665 Returns "AZ_OK" or error code.
666 my $zipFile = Archive::Zip->new();
668 my $status = $zipFile->read( '/some/FileName.zip' );
669 readFromFileHandle( $fileHandle, $filename )
671 readFromFileHandle( { fileHandle => $fileHandle, filename => $filename
672 } )
673 Read zipfile headers from an already-opened file handle, appending
674 new members. Does not close the file handle. Returns "AZ_OK" or
675 error code. Note that this requires a seekable file handle; reading
676 from a stream is not yet supported, but using in-memory data is.
677 my $fh = IO::File->new( '/some/FileName.zip', 'r' );
679 my $zip1 = Archive::Zip->new();
680 my $status = $zip1->readFromFileHandle( $fh );
681 my $zip2 = Archive::Zip->new();
682 $status = $zip2->readFromFileHandle( $fh );
683 Read zip using in-memory data (recursable):
685 open my $fh, "<", "archive.zip" or die $!;
687 my $zip_data = do { local $.; <$fh> };
688 my $zip = Archive::Zip->new;
689 open my $dh, "+<", \$zip_data;
690 $zip->readFromFileHandle ($dh);
691 Zip Archive Tree operations
693 These used to be in Archive::Zip::Tree but got moved into Archive::Zip.
694 They enable operation on an entire tree of members or files. A usage
695 example:
696 use Archive::Zip;
698 my $zip = Archive::Zip->new();
699 # add all readable files and directories below . as xyz/*
701 $zip->addTree( '.', 'xyz' );
702 # add all readable plain files below /abc as def/*
704 $zip->addTree( '/abc', 'def', sub { -f && -r } );
705 # add all .c files below /tmp as stuff/*
707 $zip->addTreeMatching( '/tmp', 'stuff', '\.c$' );
708 # add all .o files below /tmp as stuff/* if they aren't writable
710 $zip->addTreeMatching( '/tmp', 'stuff', '\.o$', sub { ! -w } );
711 # add all .so files below /tmp that are smaller than 200 bytes as stuff/*
713 $zip->addTreeMatching( '/tmp', 'stuff', '\.o$', sub { -s < 200 } );
714 # and write them into a file
716 $zip->writeToFileNamed('xxx.zip');
717 # now extract the same files into /tmpx
719 $zip->extractTree( 'stuff', '/tmpx' );
720 $zip->addTree( $root, $dest [, $pred, $compressionLevel ] ) -- Add tree
722 of files to a zip
723 $zip->addTree( { root => $root, zipName => $dest [, select => $pred,
724 compressionLevel => $compressionLevel ] )
725 $root is the root of the tree of files and directories to be added.
726 It is a valid directory name on your system. $dest is the name for
727 the root in the zip file (undef or blank means to use relative
728 pathnames). It is a valid ZIP directory name (that is, it uses
729 forward slashes (/) for separating directory components). $pred is
730 an optional subroutine reference to select files: it is passed the
731 name of the prospective file or directory using $_, and if it
732 returns true, the file or directory will be included. The default
733 is to add all readable files and directories. For instance, using
734 my $pred = sub { /\.txt/ };
736 $zip->addTree( '.', '', $pred );
737 will add all the .txt files in and below the current directory,
739 using relative names, and making the names identical in the
740 zipfile:
741 original name zip member name
743 ./xyz xyz
744 ./a/ a/
745 ./a/b a/b
746 To translate absolute to relative pathnames, just pass them in:
748 $zip->addTree( '/c/d', 'a' );
749 original name zip member name
751 /c/d/xyz a/xyz
752 /c/d/a/ a/a/
753 /c/d/a/b a/a/b
754 Returns AZ_OK on success. Note that this will not follow symbolic
756 links to directories. Note also that this does not check for the
757 validity of filenames.
758 Note that you generally don't want to make zip archive member names
760 absolute.
761 $zip->addTreeMatching( $root, $dest, $pattern [, $pred,
763 $compressionLevel ] )
764 $zip->addTreeMatching( { root => $root, zipName => $dest, pattern =>
765 $pattern [, select => $pred, compressionLevel => $compressionLevel ] }
766 )
767 $root is the root of the tree of files and directories to be added
768 $dest is the name for the root in the zip file (undef means to use
769 relative pathnames) $pattern is a (non-anchored) regular expression
770 for filenames to match $pred is an optional subroutine reference to
771 select files: it is passed the name of the prospective file or
772 directory in $_, and if it returns true, the file or directory will
773 be included. The default is to add all readable files and
774 directories. To add all files in and below the current directory
775 whose names end in ".pl", and make them extract into a subdirectory
776 named "xyz", do this:
777 $zip->addTreeMatching( '.', 'xyz', '\.pl$' )
779 To add all writable files in and below the directory named "/abc"
781 whose names end in ".pl", and make them extract into a subdirectory
782 named "xyz", do this:
783 $zip->addTreeMatching( '/abc', 'xyz', '\.pl$', sub { -w } )
785 Returns AZ_OK on success. Note that this will not follow symbolic
787 links to directories.
788 $zip->updateTree( $root [, $dest , $pred , $mirror, $compressionLevel ]
790 );
791 $zip->updateTree( { root => $root [, zipName => $dest, select => $pred,
792 mirror => $mirror, compressionLevel => $compressionLevel ] } );
793 Update a zip file from a directory tree.
794 "updateTree()" takes the same arguments as "addTree()", but first
796 checks to see whether the file or directory already exists in the
797 zip file, and whether it has been changed.
798 If the fourth argument $mirror is true, then delete all my members
800 if corresponding files were not found.
801 Returns an error code or AZ_OK if all is well.
803 $zip->extractTree( [ $root, $dest, $volume } ] )
805 $zip->extractTree( [ { root => $root, zipName => $dest, volume =>
806 $volume } ] )
807 If you don't give any arguments at all, will extract all the files
808 in the zip with their original names.
809 If you supply one argument for $root, "extractTree" will extract
811 all the members whose names start with $root into the current
812 directory, stripping off $root first. $root is in Zip (Unix)
813 format. For instance,
814 $zip->extractTree( 'a' );
816 when applied to a zip containing the files: a/x a/b/c ax/d/e d/e
818 will extract:
819 a/x as ./x
821 a/b/c as ./b/c
823 If you give two arguments, "extractTree" extracts all the members
825 whose names start with $root. It will translate $root into $dest to
826 construct the destination file name. $root and $dest are in Zip
827 (Unix) format. For instance,
828 $zip->extractTree( 'a', 'd/e' );
830 when applied to a zip containing the files: a/x a/b/c ax/d/e d/e
832 will extract:
833 a/x to d/e/x
835 a/b/c to d/e/b/c and ignore ax/d/e and d/e
837 If you give three arguments, "extractTree" extracts all the members
839 whose names start with $root. It will translate $root into $dest to
840 construct the destination file name, and then it will convert to
841 local file system format, using $volume as the name of the
842 destination volume.
843 $root and $dest are in Zip (Unix) format.
845 $volume is in local file system format.
847 For instance, under Windows,
849 $zip->extractTree( 'a', 'd/e', 'f:' );
851 when applied to a zip containing the files: a/x a/b/c ax/d/e d/e
853 will extract:
854 a/x to f:d/e/x
856 a/b/c to f:d/e/b/c and ignore ax/d/e and d/e
858 If you want absolute paths (the prior example used paths relative
860 to the current directory on the destination volume, you can specify
861 these in $dest:
862 $zip->extractTree( 'a', '/d/e', 'f:' );
864 when applied to a zip containing the files: a/x a/b/c ax/d/e d/e
866 will extract:
867 a/x to f:\d\e\x
869 a/b/c to f:\d\e\b\c and ignore ax/d/e and d/e
871 If the path to the extracted file traverses a parent directory or a
873 symbolic link, the extraction will be aborted with "AC_ERROR" for
874 security reason. Returns an error code or AZ_OK if everything
875 worked OK.
876
878 $Archive::Zip::UNICODE
879 This variable governs how Unicode file and directory names are
880 added to or extracted from an archive. If set, file and directory
881 names are considered to be UTF-8 encoded. This is EXPERIMENTAL AND
882 BUGGY (there are some edge cases on Win32). Please report problems.
883 {
885 local $Archive::Zip::UNICODE = 1;
886 $zip->addFile('Déjà vu.txt');
887 }
888
890 Member Class Methods
891 Several constructors allow you to construct members without adding them
892 to a zip archive. These work the same as the addFile(), addDirectory(),
893 and addString() zip instance methods described above, but they don't
894 add the new members to a zip.
895 Archive::Zip::Member->newFromString( $stringOrStringRef [, $fileName ]
897 )
898 Archive::Zip::Member->newFromString( { string => $stringOrStringRef [,
899 zipName => $fileName ] )
900 Construct a new member from the given string. Returns undef on
901 error.
902 my $member = Archive::Zip::Member->newFromString( 'This is a test' );
904 my $member = Archive::Zip::Member->newFromString( 'This is a test', 'test.txt' );
905 my $member = Archive::Zip::Member->newFromString( { string => 'This is a test', zipName => 'test.txt' } );
906 newFromFile( $fileName [, $zipName ] )
908 newFromFile( { filename => $fileName [, zipName => $zipName ] } )
909 Construct a new member from the given file. Returns undef on error.
910 my $member = Archive::Zip::Member->newFromFile( 'xyz.txt' );
912 newDirectoryNamed( $directoryName [, $zipname ] )
914 newDirectoryNamed( { directoryName => $directoryName [, zipName =>
915 $zipname ] } )
916 Construct a new member from the given directory. $directoryName
917 must be a valid name on your file system; it does not have to
918 exist.
919 If given, $zipname will be the name of the zip member; it must be a
921 valid Zip (Unix) name. If not given, it will be converted from
922 $directoryName.
923 Returns undef on error.
925 my $member = Archive::Zip::Member->newDirectoryNamed( 'CVS/' );
927 Member Simple Accessors
929 These methods get (and/or set) member attribute values.
930 The zip64 format requires parts of the member data to be stored in the
932 so-called extra fields. You cannot get nor set this zip64 data through
933 the extra field accessors described in this section. In fact, the low-
934 level member methods ensure that the zip64 data in the extra fields is
935 handled completely transparently and invisibly to the user when members
936 are read or written.
937 zip64()
939 Returns whether the previous read or write of the member has been
940 done in zip64 format.
941 desiredZip64Mode()
943 Gets or sets whether the member's headers should be written in
944 zip64 format: As needed (ZIP64_AS_NEEDED), the default, or always
945 (ZIP64_HEADERS).
946 versionMadeBy()
948 Gets the field from the member header.
949 fileAttributeFormat( [ $format ] )
951 fileAttributeFormat( [ { format => $format ] } )
952 Gets or sets the field from the member header. These are "FA_*"
953 values.
954 versionNeededToExtract()
956 Gets the field from the member header.
957 bitFlag()
959 Gets the general purpose bit field from the member header. This is
960 where the "GPBF_*" bits live.
961 compressionMethod()
963 Returns the member compression method. This is the method that is
964 currently being used to compress the member data. This will be
965 COMPRESSION_STORED for added string or file members, or any of the
966 "COMPRESSION_*" values for members from a zip file. However, this
967 module can only handle members whose data is in COMPRESSION_STORED
968 or COMPRESSION_DEFLATED format.
969 desiredCompressionMethod( [ $method ] )
971 desiredCompressionMethod( [ { compressionMethod => $method } ] )
972 Get or set the member's "desiredCompressionMethod". This is the
973 compression method that will be used when the member is written.
974 Returns prior desiredCompressionMethod. Only COMPRESSION_DEFLATED
975 or COMPRESSION_STORED are valid arguments. Changing to
976 COMPRESSION_STORED will change the member desiredCompressionLevel
977 to 0; changing to COMPRESSION_DEFLATED will change the member
978 desiredCompressionLevel to COMPRESSION_LEVEL_DEFAULT.
979 desiredCompressionLevel( [ $level ] )
981 desiredCompressionLevel( [ { compressionLevel => $level } ] )
982 Get or set the member's desiredCompressionLevel This is the method
983 that will be used to write. Returns prior desiredCompressionLevel.
984 Valid arguments are 0 through 9, COMPRESSION_LEVEL_NONE,
985 COMPRESSION_LEVEL_DEFAULT, COMPRESSION_LEVEL_BEST_COMPRESSION, and
986 COMPRESSION_LEVEL_FASTEST. 0 or COMPRESSION_LEVEL_NONE will change
987 the desiredCompressionMethod to COMPRESSION_STORED. All other
988 arguments will change the desiredCompressionMethod to
989 COMPRESSION_DEFLATED.
990 externalFileName()
992 Return the member's external file name, if any, or undef.
993 fileName()
995 Get or set the member's internal filename. Returns the (possibly
996 new) filename. Names will have backslashes converted to forward
997 slashes, and will have multiple consecutive slashes converted to
998 single ones.
999 lastModFileDateTime()
1001 Return the member's last modification date/time stamp in MS-DOS
1002 format.
1003 lastModTime()
1005 Return the member's last modification date/time stamp, converted to
1006 unix localtime format.
1007 print "Mod Time: " . scalar( localtime( $member->lastModTime() ) );
1009 setLastModFileDateTimeFromUnix()
1011 Set the member's lastModFileDateTime from the given unix time.
1012 $member->setLastModFileDateTimeFromUnix( time() );
1014 internalFileAttributes()
1016 Return the internal file attributes field from the zip header. This
1017 is only set for members read from a zip file.
1018 externalFileAttributes()
1020 Return member attributes as read from the ZIP file. Note that these
1021 are NOT UNIX!
1022 unixFileAttributes( [ $newAttributes ] )
1024 unixFileAttributes( [ { attributes => $newAttributes } ] )
1025 Get or set the member's file attributes using UNIX file attributes.
1026 Returns old attributes.
1027 my $oldAttribs = $member->unixFileAttributes( 0666 );
1029 Note that the return value has more than just the file permissions,
1031 so you will have to mask off the lowest bits for comparisons.
1032 localExtraField( [ $newField ] )
1034 localExtraField( [ { field => $newField } ] )
1035 Gets or sets the extra field that was read from the local header.
1036 The extra field must be in the proper format. If it is not or if
1037 the new field contains data related to the zip64 format, this
1038 method does not modify the extra field and returns AZ_FORMAT_ERROR,
1039 otherwise it returns AZ_OK.
1040 cdExtraField( [ $newField ] )
1042 cdExtraField( [ { field => $newField } ] )
1043 Gets or sets the extra field that was read from the central
1044 directory header. The extra field must be in the proper format. If
1045 it is not or if the new field contains data related to the zip64
1046 format, this method does not modify the extra field and returns
1047 AZ_FORMAT_ERROR, otherwise it returns AZ_OK.
1048 extraFields()
1050 Return both local and CD extra fields, concatenated.
1051 fileComment( [ $newComment ] )
1053 fileComment( [ { comment => $newComment } ] )
1054 Get or set the member's file comment.
1055 hasDataDescriptor()
1057 Get or set the data descriptor flag. If this is set, the local
1058 header will not necessarily have the correct data sizes. Instead, a
1059 small structure will be stored at the end of the member data with
1060 these values. This should be transparent in normal operation.
1061 crc32()
1063 Return the CRC-32 value for this member. This will not be set for
1064 members that were constructed from strings or external files until
1065 after the member has been written.
1066 crc32String()
1068 Return the CRC-32 value for this member as an 8 character printable
1069 hex string. This will not be set for members that were constructed
1070 from strings or external files until after the member has been
1071 written.
1072 compressedSize()
1074 Return the compressed size for this member. This will not be set
1075 for members that were constructed from strings or external files
1076 until after the member has been written.
1077 uncompressedSize()
1079 Return the uncompressed size for this member.
1080 password( [ $password ] )
1082 Returns the password for this member to be used on decryption. If
1083 $password is given, it will set the password for the decryption.
1084 isEncrypted()
1086 Return true if this member is encrypted. The Archive::Zip module
1087 does not currently support creation of encrypted members.
1088 Decryption works more or less like this:
1089 my $zip = Archive::Zip->new;
1091 $zip->read ("encrypted.zip");
1092 for my $m (map { $zip->memberNamed ($_) } $zip->memberNames) {
1093 $m->password ("secret");
1094 $m->contents; # is "" when password was wrong
1095 That shows that the password has to be set per member, and not per
1097 archive. This might change in the future.
1098 isTextFile( [ $flag ] )
1100 isTextFile( [ { flag => $flag } ] )
1101 Returns true if I am a text file. Also can set the status if given
1102 an argument (then returns old state). Note that this module does
1103 not currently do anything with this flag upon extraction or
1104 storage. That is, bytes are stored in native format whether or not
1105 they came from a text file.
1106 isBinaryFile()
1108 Returns true if I am a binary file. Also can set the status if
1109 given an argument (then returns old state). Note that this module
1110 does not currently do anything with this flag upon extraction or
1111 storage. That is, bytes are stored in native format whether or not
1112 they came from a text file.
1113 extractToFileNamed( $fileName )
1115 extractToFileNamed( { name => $fileName } )
1116 Extract me to a file with the given name. The file will be created
1117 with default modes. Directories will be created as needed. The
1118 $fileName argument should be a valid file name on your file system.
1119 Returns AZ_OK on success.
1120 isDirectory()
1122 Returns true if I am a directory.
1123 isSymbolicLink()
1125 Returns true if I am a symbolic link.
1126 writeLocalHeaderRelativeOffset()
1128 Returns the file offset in bytes the last time I was written.
1129 wasWritten()
1131 Returns true if I was successfully written. Reset at the beginning
1132 of a write attempt.
1133 Low-level member data reading
1135 It is possible to use lower-level routines to access member data
1136 streams, rather than the extract* methods and contents(). For instance,
1137 here is how to print the uncompressed contents of a member in chunks
1138 using these methods:
1139 my ( $member, $status, $bufferRef );
1141 $member = $zip->memberNamed( 'xyz.txt' );
1142 $member->desiredCompressionMethod( COMPRESSION_STORED );
1143 $status = $member->rewindData();
1144 die "error $status" unless $status == AZ_OK;
1145 while ( ! $member->readIsDone() )
1146 {
1147 ( $bufferRef, $status ) = $member->readChunk();
1148 die "error $status"
1149 if $status != AZ_OK && $status != AZ_STREAM_END;
1150 # do something with $bufferRef:
1151 print $$bufferRef;
1152 }
1153 $member->endRead();
1154 readChunk( [ $chunkSize ] )
1156 readChunk( [ { chunkSize => $chunkSize } ] )
1157 This reads the next chunk of given size from the member's data
1158 stream and compresses or uncompresses it as necessary, returning a
1159 reference to the bytes read and a status. If size argument is not
1160 given, defaults to global set by Archive::Zip::setChunkSize. Status
1161 is AZ_OK on success until the last chunk, where it returns
1162 AZ_STREAM_END. Returns "( \$bytes, $status)".
1163 my ( $outRef, $status ) = $self->readChunk();
1165 print $$outRef if $status != AZ_OK && $status != AZ_STREAM_END;
1166 rewindData()
1168 Rewind data and set up for reading data streams or writing zip
1169 files. Can take options for "inflateInit()" or "deflateInit()", but
1170 this is not likely to be necessary. Subclass overrides should call
1171 this method. Returns "AZ_OK" on success.
1172 endRead()
1174 Reset the read variables and free the inflater or deflater. Must
1175 be called to close files, etc. Returns AZ_OK on success.
1176 readIsDone()
1178 Return true if the read has run out of data or encountered an
1179 error.
1180 contents()
1182 Return the entire uncompressed member data or undef in scalar
1183 context. When called in array context, returns "( $string, $status
1184 )"; status will be AZ_OK on success:
1185 my $string = $member->contents();
1187 # or
1188 my ( $string, $status ) = $member->contents();
1189 die "error $status" unless $status == AZ_OK;
1190 Can also be used to set the contents of a member (this may change
1192 the class of the member):
1193 $member->contents( "this is my new contents" );
1195 extractToFileHandle( $fh )
1197 extractToFileHandle( { fileHandle => $fh } )
1198 Extract (and uncompress, if necessary) the member's contents to the
1199 given file handle. Return AZ_OK on success.
1200 For members representing symbolic links, pass the name of the
1202 symbolic link as file handle. Ensure that all directories in the
1203 path to the symbolic link already exist.
1204
1206 The Archive::Zip::FileMember class extends Archive::Zip::Member. It is
1207 the base class for both ZipFileMember and NewFileMember classes. This
1208 class adds an "externalFileName" and an "fh" member to keep track of
1209 the external file.
1210 externalFileName()
1212 Return the member's external filename.
1213 fh()
1215 Return the member's read file handle. Automatically opens file if
1216 necessary.
1217
1219 The Archive::Zip::ZipFileMember class represents members that have been
1220 read from external zip files.
1221 diskNumberStart()
1223 Returns the disk number that the member's local header resides in.
1224 Should be 0.
1225 localHeaderRelativeOffset()
1227 Returns the offset into the zip file where the member's local
1228 header is.
1229 dataOffset()
1231 Returns the offset from the beginning of the zip file to the
1232 member's data.
1233
1235 Archive::Zip requires several other modules:
1236 Carp
1238 Compress::Raw::Zlib
1240 Cwd
1242 File::Basename
1244 File::Copy
1246 File::Find
1248 File::Path
1250 File::Spec
1252 IO::File
1254 IO::Seekable
1256 Time::Local
1258
1260 When not to use Archive::Zip
1261 If you are just going to be extracting zips (and/or other archives) you
1262 are recommended to look at using Archive::Extract instead, as it is
1263 much easier to use and factors out archive-specific functionality.
1264 Zip64 Format Support
1266 Since version 1.66 Archive::Zip supports the so-called zip64 format,
1267 which overcomes various limitations in the original zip file format.
1268 On some Perl interpreters, however, even version 1.66 and newer of
1269 Archive::Zip cannot support the zip64 format. Among these are all Perl
1270 interpreters that lack 64-bit support and those older than version
1271 5.10.0.
1272 Constant "ZIP64_SUPPORTED", exported with tag :CONSTANTS, equals true
1274 if Archive::Zip on the current Perl interpreter supports the zip64
1275 format. If it does not and you try to read or write an archive in
1276 zip64 format, anyway, Archive::Zip returns an error "AZ_ERROR" and
1277 reports an error message along the lines of "zip64 format not supported
1278 on this Perl interpreter".
1279 "versionMadeBy" and "versionNeededToExtract"
1281 The zip64 format and the zip file format in general specify what values
1282 to use for the "versionMadeBy" and "versionNeededToExtract" fields in
1283 the local file header, central directory file header, and zip64 EOCD
1284 record. In practice however, these fields seem to be more or less
1285 randomly used by various archiver implementations.
1286 To achieve a compromise between backward compatibility and (whatever)
1288 standard compliance, Archive::Zip handles them as follows:
1289 • For field "versionMadeBy", Archive::Zip uses default value 20 (45
1291 for the zip64 EOCD record) or any previously read value. It never
1292 changes that value when writing a header, even if it is written in
1293 zip64 format, or when writing the zip64 EOCD record.
1294 • Likewise for field "versionNeededToExtract", but here Archive::Zip
1296 forces a minimum value of 45 when writing a header in zip64 format
1297 or the zip64 EOCD record.
1298 • Finally, Archive::Zip never depends on the values of these fields
1300 in any way when reading an archive from a file or file handle.
1301 Try to avoid IO::Scalar
1303 One of the most common ways to use Archive::Zip is to generate Zip
1304 files in-memory. Most people use IO::Scalar for this purpose.
1305 Unfortunately, as of 1.11 this module no longer works with IO::Scalar
1307 as it incorrectly implements seeking.
1308 Anybody using IO::Scalar should consider porting to IO::String, which
1310 is smaller, lighter, and is implemented to be perfectly compatible with
1311 regular seekable filehandles.
1312 Support for IO::Scalar most likely will not be restored in the future,
1314 as IO::Scalar itself cannot change the way it is implemented due to
1315 back-compatibility issues.
1316 Wrong password for encrypted members
1318 When an encrypted member is read using the wrong password, you
1319 currently have to re-read the entire archive to try again with the
1320 correct password.
1321
1323 * auto-choosing storing vs compression
1324 * extra field hooks (see notes.txt)
1326 * check for duplicates on addition/renaming?
1328 * Text file extraction (line end translation)
1330 * Reading zip files from non-seekable inputs
1332 (Perhaps by proxying through IO::String?)
1333 * separate unused constants into separate module
1335 * cookbook style docs
1337 * Handle tainted paths correctly
1339 * Work on better compatibility with other IO:: modules
1341 * Support encryption
1343 * More user-friendly decryption
1345
1347 Bugs should be reported on GitHub
1348 <https://github.com/redhotpenguin/perl-Archive-Zip/issues>
1350 For other issues contact the maintainer.
1352
1354 Currently maintained by Fred Moyer <fred@redhotpenguin.com>
1355 Previously maintained by Adam Kennedy <adamk@cpan.org>
1357 Previously maintained by Steve Peters <steve@fisharerojo.org>.
1359 File attributes code by Maurice Aubrey <maurice@lovelyfilth.com>.
1361 Originally by Ned Konz <nedkonz@cpan.org>.
1363
1365 Some parts copyright 2006 - 2012 Adam Kennedy.
1366 Some parts copyright 2005 Steve Peters.
1368 Original work copyright 2000 - 2004 Ned Konz.
1370 This program is free software; you can redistribute it and/or modify it
1372 under the same terms as Perl itself.
1373
1375 Look at Archive::Zip::MemberRead which is a wrapper that allows one to
1376 read Zip archive members as if they were files.
1377 Compress::Raw::Zlib, Archive::Tar, Archive::Extract
1379perl v5.36.0 2022-07-22 Archive::Zip(3)