1OCF_HEARTBEAT_CTDB(7) OCF resource agents OCF_HEARTBEAT_CTDB(7)
2
3
4
6 ocf_heartbeat_CTDB - CTDB Resource Agent
7
9 CTDB [start | stop | monitor | meta-data | validate-all]
10
12 This resource agent manages CTDB, allowing one to use Clustered Samba
13 in a Linux-HA/Pacemaker cluster. You need a shared filesystem (e.g.
14 OCFS2 or GFS2) on which the CTDB lock will be stored. Create
15 /etc/ctdb/nodes containing a list of private IP addresses of each node
16 in the cluster, then configure this RA as a clone. This agent expects
17 the samba and windbind resources to be managed outside of CTDB's
18 control as a separate set of resources controlled by the cluster
19 manager. The optional support for enabling CTDB management of these
20 daemons will be depreciated.
21
22 For more information see http://linux-ha.org/wiki/CTDB_(resource_agent)
23
25 ctdb_recovery_lock
26 The location of a shared lock file or helper binary, common across
27 all nodes. See CTDB documentation for details.
28
29 (unique, required, string, no default)
30
31 ctdb_manages_samba
32 Should CTDB manage starting/stopping the Samba service for you?
33 This will be deprecated in future, in favor of configuring a
34 separate Samba resource.
35
36 (optional, boolean, default no)
37
38 ctdb_manages_winbind
39 Should CTDB manage starting/stopping the Winbind service for you?
40 This will be deprecated in future, in favor of configuring a
41 separate Winbind resource.
42
43 (optional, boolean, default no)
44
45 ctdb_service_smb
46 Name of smb init script. Only necessary if CTDB is managing Samba
47 directly. Will usually be auto-detected.
48
49 (optional, string, no default)
50
51 ctdb_service_nmb
52 Name of nmb init script. Only necessary if CTDB is managing Samba
53 directly. Will usually be auto-detected.
54
55 (optional, string, no default)
56
57 ctdb_service_winbind
58 Name of winbind init script. Only necessary if CTDB is managing
59 Winbind directly. Will usually be auto-detected.
60
61 (optional, string, no default)
62
63 ctdb_samba_skip_share_check
64 If there are very many shares it may not be feasible to check that
65 all of them are available during each monitoring interval. In that
66 case this check can be disabled.
67
68 (optional, boolean, default yes)
69
70 ctdb_monitor_free_memory
71 If the amount of free memory drops below this value the node will
72 become unhealthy and ctdb and all managed services will be
73 shutdown. Once this occurs, the administrator needs to find the
74 reason for the OOM situation, rectify it and restart ctdb with
75 "service ctdb start". With CTDB 4.4.0 and later this parameter is
76 ignored.
77
78 (optional, integer, default 100)
79
80 ctdb_start_as_disabled
81 When set to yes, the CTDB node will start in DISABLED mode and not
82 host any public ip addresses.
83
84 (optional, boolean, default no)
85
86 ctdb_config_dir
87 The directory containing various CTDB configuration files. The
88 "nodes" and "notify.sh" scripts are expected to be in this
89 directory.
90
91 (optional, string, default "/etc/ctdb")
92
93 ctdb_binary
94 Full path to the CTDB binary.
95
96 (optional, string, default "/usr/bin/ctdb")
97
98 ctdbd_binary
99 Full path to the CTDB cluster daemon binary.
100
101 (optional, string, default "/usr/sbin/ctdbd")
102
103 ctdb_socket
104 Full path to the domain socket that ctdbd will create, used for
105 local clients to attach and communicate with the ctdb daemon. With
106 CTDB 4.9.0 and later the socket path is hardcoded at build time, so
107 this parameter is ignored.
108
109 (unique, optional, string, default "/run/ctdb/ctdbd.socket")
110
111 ctdb_dbdir
112 The directory to put the local CTDB database files in. Persistent
113 database files will be put in ctdb_dbdir/persistent.
114
115 (unique, optional, string, default "/var/run")
116
117 ctdb_logfile
118 Full path to log file. To log to syslog instead, use the value
119 "syslog".
120
121 (optional, string, default "/var/log/ctdb/log.ctdb")
122
123 ctdb_rundir
124 Full path to ctdb runtime directory, used for storage of socket
125 lock state.
126
127 (optional, string, default "/run/ctdb")
128
129 ctdb_timeout
130 Indicates that ctdb should wait up to TIMEOUT seconds for a
131 response to most commands sent to the CTDB daemon.
132
133 (unique, optional, integer, default 10)
134
135 ctdb_debuglevel
136 What debug level to run at (0-10). Higher means more verbose.
137
138 (optional, integer, default 2)
139
140 ctdb_max_open_files
141 Maximum number of open files (for ulimit -n)
142
143 (optional, integer, no default)
144
145 smb_conf
146 Path to default samba config file. Only necessary if CTDB is
147 managing Samba.
148
149 (optional, string, default "/etc/samba/smb.conf")
150
151 smb_private_dir
152 The directory for smbd to use for storing such files as smbpasswd
153 and secrets.tdb. Old versions of CTBD (prior to 1.0.50) required
154 this to be on shared storage. This parameter should not be set for
155 current versions of CTDB, and only remains in the RA for backwards
156 compatibility.
157
158 (unique, optional, string, no default)
159
160 smb_passdb_backend
161 Which backend to use for storing user and possibly group
162 information. Only necessary if CTDB is managing Samba.
163
164 (optional, string, default "tdbsam")
165
166 smb_idmap_backend
167 Which backend to use for SID/uid/gid mapping. Only necessary if
168 CTDB is managing Samba.
169
170 (optional, string, default "tdb2")
171
172 smb_fileid_algorithm
173 Which fileid:algorithm to use with vfs_fileid. The correct value
174 depends on which clustered filesystem is in use, e.g.: for OCFS2,
175 this should be set to "fsid". Only necessary if CTDB is managing
176 Samba.
177
178 (optional, string, no default)
179
181 This resource agent supports the following actions (operations):
182
183 start
184 Starts the resource. Suggested minimum timeout: 90s.
185
186 stop
187 Stops the resource. Suggested minimum timeout: 100s.
188
189 monitor
190 Performs a detailed status check. Suggested minimum timeout: 20s.
191 Suggested interval: 10s.
192
193 meta-data
194 Retrieves resource agent metadata (internal use only). Suggested
195 minimum timeout: 5s.
196
197 validate-all
198 Performs a validation of the resource configuration. Suggested
199 minimum timeout: 30s.
200
202 The following is an example configuration for a CTDB resource using the
203 crm(8) shell:
204
205 primitive p_CTDB ocf:heartbeat:CTDB \
206 params \
207 ctdb_recovery_lock=string \
208 op monitor timeout="20s" interval="10s" depth="0"
209
211 The following is an example configuration for a CTDB resource using
212 pcs(8)
213
214 pcs resource create p_CTDB ocf:heartbeat:CTDB \
215 ctdb_recovery_lock=string \
216 op monitor timeout="20s" interval="10s" OCF_CHECK_LEVEL="0"
217
219 http://clusterlabs.org/
220
222 ClusterLabs contributors (see the resource agent source for information
223 about individual authors)
224
225
226
227resource-agents UNKNOWN 01/25/2023 OCF_HEARTBEAT_CTDB(7)