1SQUATTER(8) Cyrus IMAP SQUATTER(8)
2
6 squatter - Cyrus IMAP documentation
7 Create SQUAT and Xapian indexes for mailboxes
9
11 general:
12 squatter [ -C config-file ] [mode] [options] [source]
13 i.e.:
15 squatter [ -C config-file ] [ -v ] [ -a ] [ -S seconds ] [ -Z ]
16 squatter [ -C config-file ] [ -v ] [ -a ] [ -i ] [ -N name ] [ -S seconds ] [ -r ] [ -Z ] mailbox...
17 squatter [ -C config-file ] [ -v ] [ -a ] [ -i ] [ -N name ] [ -S seconds ] [ -r ] [ -Z ] -u user...
18 squatter [ -C config-file ] [ -v ] [ -a ] -R [ -n channel ] [ -d ] [ -S seconds ] [ -Z ]
19 squatter [ -C config-file ] [ -v ] [ -a ] -f synclogfile [ -S seconds ] [ -Z ]
20 squatter [ -C config-file ] [ -v ] -t srctier(s)... -z desttier [ -B ] [ -F ] [ -U ] [ -T reindextiers ] [ -X ] [ -o ] [ -S seconds ] [ -u user... ]
21
23 NOTE:
24 The name “squatter” once referred both to the SQUAT indexing engine
25 and to the command used to create indexes. Now that Cyrus supports
26 more than one index type – SQUAT and Xapian, as of this writing –
27 the name “squatter” refers to the command used to control index cre‐
28 ation. The terms “SQUAT” or “SQUAT index(es)” refers to the indexes
29 used by the older SQUAT indexing engine. Post v3 the search_engine
30 setting in imapd.conf determines which search engine is used.
31 squatter creates a new text index for one or more IMAP mailboxes. The
33 index is a unified index of all of the header and body text of each
34 message in a given mailbox. This index is used to significantly reduce
35 IMAP SEARCH times on a mailbox.
36 mode is one of indexer, search, rolling, synclog, compact or audit.
38 By default, squatter creates an index of ALL messages in the mailbox,
40 not just those since the last time that it was run. The -i option is
41 used to select incremental updates. Any messages appended to the mail‐
42 box after squatter is run, will NOT be included in the index. To in‐
43 clude new messages in the index, squatter must be run again, or on a
44 regular basis via crontab, an entry in the EVENTS section of
45 cyrus.conf(5) or use rolling mode (-R).
46 In the first synopsis, squatter indexes all mailboxes.
48 In the second synopsis, squatter indexes the specified mailbox(es).
50 The mailboxes are space-separated.
51 In the third synopsis, squatter indexes the specified user(s) mail‐
53 box(es).
54 For the latter two index modes (mailbox, user) one may optionally spec‐
56 ify -r to recurse from the specified start, or -a to limit action only
57 to mailboxes which have the shared /vendor/cmu/cyrus-imapd/squat anno‐
58 tation set to “true”.
59 In the fourth synopsis, squatter runs in rolling mode. In this mode
61 squatter backgrounds itself and runs as a daemon (unless -d is set),
62 listening to a sync log channel chosen using the -n option, and set up
63 using the sync_log_channels setting in imapd.conf(5). Very soon after
64 messages are delivered or uploaded to mailboxes squatter will incremen‐
65 tally index the affected mailbox (see notes, below).
66 In the fifth synopsis, squatter reads a single sync log file and per‐
68 forms incremental indexing on the mailbox(es) listed therein. This is
69 sometimes useful for cleaning up after problems with rolling mode.
70 In the sixth synopsis, squatter will compact indices from srctier(s) to
72 desttier, optionally reindexing (-X) or filtering expunged records (-F)
73 in the process. The optional -T flag may be used to specify members of
74 srctiers which must be reindexed. These files are eventually copied
75 with rsync -a and then removed by rm. rsync can increase the load av‐
76 erage of the system, especially when the temporary directory is on
77 tmpfs. To throttle rsync it is possible to modify the call in
78 imap/search_xapian.c and pass --bwlimit=<number> as further parameter.
79 The -o flag may be used to direct that a single index be copied, rather
80 than compacted, from srctier to desttier. The -u flag may be used to
81 restrict operation to the specified user(s).
82 For all modes, the -S option may be specified, causing squatter to
84 pause seconds seconds after each mailbox, to smooth loads.
85 When using the Xapian engine the -Z option may be specified, for the
87 indexing modes. This tells squatter to consult the Xapian internally
88 indexed GUIDs, rather than relying on what’s stored in cyrus.in‐
89 dexed.db, allowing for recovery from broken cyrus.indexed.db at the
90 sacrifice of efficiency.
91 NOTE:
93 Incremental updates are very inefficient with the SQUAT search en‐
94 gine. If using SQUAT for large and active mailboxes, you should run
95 squatter periodically as an EVENT in cyrus.conf(5).
96 NOTE:
98 Messages and mailboxes that have not been indexed CAN still be
99 SEARCHed, just not as quickly as those with an index.
100 squatter reads its configuration options out of the imapd.conf(5) file
102 unless specified otherwise by -C.
103
105 -C config-file
106 Use the specified configuration file config-file rather than the
107 default imapd.conf(5).
108 -a, --squat-annot
110 Only create indexes for mailboxes which have the shared /ven‐
111 dor/cmu/cyrus-imapd/squat annotation set to “true”.
112 The value of the /vendor/cmu/cyrus-imapd/squat annotation is in‐
114 herited by all children of the given mailbox, so an entire mail‐
115 box tree can be indexed (or not indexed) by setting a single an‐
116 notation on the root of that tree with a value of “true” (or
117 “false”). If a mailbox does not have a /ven‐
118 dor/cmu/cyrus-imapd/squat annotation set on it (or does not in‐
119 herit one), then the mailbox is not indexed. In other words, the
120 implicit value of /vendor/cmu/cyrus-imapd/squat is “false”.
121 -A, --audit
123 Audits the specified mailboxes (or all), reports any unindexed
124 messages. This feature is only available on the master branch.
125 -d, --nodaemon
127 In rolling mode, don’t background and do emit log messages on
128 standard error. Useful for debugging. This feature was intro‐
129 duced in version 3.0.
130 -B, --skip-locked
132 In compact mode, use non-blocking lock to start and skip any
133 users who have their xapianactive file locked at the time (i.e
134 another reindex task) This feature is only available on the mas‐
135 ter branch.
136 -F, --filter
138 In compact mode, filter the resulting database to only include
139 messages which are not expunged in mailboxes with existing
140 name/uidvalidity. This feature was introduced in version 3.0.
141 -f synclogfile, --synclog=synclogfile
143 Read the synclogfile and incrementally index all the mailboxes
144 listed therein, then exit. This feature was introduced in ver‐
145 sion 3.0.
146 -h, --help
148 Display this usage information.
149 -i, --incremental
151 Incremental updates where indexes already exist.
152 -N name, --name=name
154 Only index mailboxes beginning with name while iterating through
155 the mailbox list derived from other options.
156 -n channel, --channel=channel
158 In rolling mode, specify the name of the sync log channel that
159 squatter will listen to. The default is “squatter”. This chan‐
160 nel must be defined in imapd.conf(5) before being used. This
161 feature was introduced in version 3.0.
162 -o, --copydb
164 In compact mode, if only one source database is selected, just
165 copy it to the destination rather than compacting. This feature
166 was introduced in version 3.0.
167 -p, --allow-partials
169 When indexing, allow messages to be partially indexed. This
170 may occur if attachment indexing is enabled but indexing
171 failed for one or more attachment body parts. If this flag is
172 set, the message is partially indexed and squatter continues.
173 Otherwise squatter aborts with an error. Also see -P. Xapian
174 only. This feature is only available on the master branch.
175 -P, --reindex-partials
177 When reindexing, then attempt to reindex any partially
178 indexed messages (see -p). Setting this flag implies -Z.
179 Xapian only. This feature is only available on the mas‐
180 ter branch.
181 -L, --reindex-minlevel=level
183 When reindexing, index all messages that have an index
184 level less than level. Currently, Cyrus only supports two
185 index levels: A message for which attachment indexing was
186 never attempted has index level 1. A message that has in‐
187 dexed attachments, or does not contain attachments, has
188 index level 3. Consequently, running squatter with min‐
189 level set to 3 will cause it to attempt reindexing all
190 messages, for which attachment indexing never was at‐
191 tempted. Future Cyrus versions may introduce additional
192 levels. Setting this flag implies -Z. Xapian only. This
193 feature is only available on the master branch.
194 -R, --rolling
196 Run in rolling mode; squatter runs as a daemon listening to a
197 sync log channel and continuously incrementally indexing mail‐
198 boxes. See also -d and -n. This feature was introduced in ver‐
199 sion 3.0.
200 -r, --recursive
202 Recursively create indexes for all sub-mailboxes of the user,
203 mailboxes or mailbox prefixes given as arguments.
204 -s, --squat-skip[=delta]
206 Skip mailboxes that have not been modified since last index.
207 This is achieved by comparing the last modification time of a
208 mailbox to the last time the squat index of this mailbox got up‐
209 dated. If the mailbox modification time (plus delta) is less
210 than the squat index modification time, then the mailbox is
211 skipped. The optional argument value delta is defined in seconds
212 and must be equal to or higher than zero, the default value is
213 60. Squat only. This feature is only available on the master
214 branch.
215 -S seconds, --sleep=seconds
217 After processing each mailbox, sleep for “seconds” before con‐
218 tinuing. Can be used to provide some load balancing. Accepts
219 fractional amounts. This feature was introduced in version 3.0.
220 -T reindextiers, --reindex-tier=reindextiers
222 In compact mode, a comma-separated subset of the source tiers
223 (see -t) to be reindexed. Similar to -X but allows limiting the
224 tiers that will be reindexed. This feature was introduced in
225 version 3.0.
226 -t srctiers, --srctier=srctiers
228 In compact mode, the comma-separated source tier(s) for the com‐
229 pacted indices. At least one source tier must be specified in
230 compact mode. Xapian only. This feature was introduced in ver‐
231 sion 3.0.
232 -u name, --user=name
234 Extra options refer to usernames (e.g. foo@bar.com) rather than
235 mailbox names. Usernames are space-separated. This feature was
236 introduced in version 3.0.
237 -U, --only-upgrade
239 In compact mode, only compact if re-indexing. Xapian only.
240 This feature is only available on the master branch.
241 -v, --verbose
243 Increase the verbosity of progress/status messages. Sometimes
244 additional messages are emitted on the terminal with this option
245 and the messages are unconditionally sent to syslog. Sometimes
246 messages are sent to syslog, only if -v is provided. In rolling
247 and synclog modes, -vv sends even more messages to syslog.
248 -X, --reindex
250 Reindex all the messages before compacting. This mode reads all
251 the lists of messages indexed by the listed tiers, and re-in‐
252 dexes them into a temporary database before compacting that into
253 place. Xapian only. This feature was introduced in version
254 3.0.
255 -z desttier, --compact=desttier
257 In compact mode, the destination tier for the compacted indices.
258 This must be specified in compact mode. Xapian only. This fea‐
259 ture was introduced in version 3.0.
260 -Z, --internalindex
262 When indexing messages, use the Xapian internal cyrusid rather
263 than referencing the ranges of already indexed messages to know
264 if a particular message is indexed. Useful if the ranges get
265 out of sync with the actual messages (e.g. if files on a tier
266 are lost) Xapian only. This feature is only available on the
267 master branch.
268
270 squatter is typically deployed via entries in cyrus.conf(5), in either
271 the DAEMON or EVENTS sections.
272 For the older SQUAT search engine, which offers poor performance in
274 rolling mode (-R) we recommend triggering periodic runs via entries in
275 the EVENTS section, as follows:
276 Sample entries from the EVENTS section of cyrus.conf(5) for periodic
278 squatter runs:
279 EVENTS {
281 # reindex changed mailboxes (fulltext) approximately every three hours
282 squatter1 cmd="/usr/bin/ionice -c idle /usr/lib/cyrus/bin/squatter -i" period=180
283 # reindex all mailboxes (fulltext) daily
285 squattera cmd="/usr/lib/cyrus/bin/squatter" at=0117
286 }
287 For the newer Xapian search engine, and with sufficiently fast storage,
289 the rolling mode (-R) offers advantages. Use of rolling mode requires
290 that squatter be invoked in the DAEMON section.
291 Sample entries for the DAEMON section of cyrus.conf(5) for rolling
293 squatter operation:
294 DAEMON {
296 # run a rolling squatter using the default sync_log channel "squatter"
297 squatter cmd="squatter -R"
298 # run a rolling squatter using a specific sync_log channel
300 squatter cmd="squatter -R -n indexer"
301 }
302 NOTE:
304 When using the -R rolling mode, you MUST enable sync_log operation
305 in imapd.conf(5) via the sync_log: on setting, and MUST define a
306 sync_log channel via the sync_log_channels: setting. If also using
307 replication, you must either explicitly specify your replication
308 sync_log channel via the sync_log_channels directive with a name, or
309 specify the default empty name with “” (the two-character string
310 U+22 U+22). [Please see imapd.conf(5) for details].
311 NOTE:
313 When configuring rolling search indexing on a replica, one must con‐
314 sider whether sync_logs will be written at all. In this case,
315 please consider the setting sync_log_unsuppressable_channels to en‐
316 sure that the sync_log channel upon which one’s squatter instance
317 depends will continue to be written. See imapd.conf(5) for details.
318 NOTE:
320 When using the Xapian search engine, you must define various set‐
321 tings in imapd.conf(5). Please read all relevant Xapian documenta‐
322 tion in this release before using Xapian.
323 [NB: More examples needed]
325
327 Support for additional search engines was added in version 3.0.
328 The following command-line switches were added in version 3.0:
330 -F -R -X -d -f -o -u
332 The following command-line settings were added in version 3.0:
334 -S <seconds>, -T <directory>, -f <synclogfile>, -n <channel>, -t srctier..., -z desttier
336
338 /etc/imapd.conf, /etc/cyrus.conf
339
341 imapd.conf(5), cyrus.conf(5)
342
344 The Cyrus Team, Nic Bernstein (Onlight)
345
347 1993-2018, The Cyrus Team
3483.4.4 June 27, 2022 SQUATTER(8)