1KS-LIBVIRT(1) User Contributed Perl Documentation KS-LIBVIRT(1)
2
6 ks-libvirt - Take a Fedora/CentOS/RHEL kickstart file and make a VM
7
9 ks-libvirt [options] kickstart-file
10 At the end of install, if the VM is not shut down with --off and the
12 guest agent is not excluded with --noaddga, the script waits until the
13 VM is up and an IPv4 address is configured; it will clean any previous
14 SSH host keys for that IP and then print the IP, so if you have an SSH
15 key defined, you can do:
16 ssh -l root $(ks-libvirt kickstart-file)
18
20 --addga | -a
21 Add qemu-guest-agent to %packages; default is to do this, use
22 --noaddga to disable. Without the agent, the hypvervisor cannot
23 get the IP of the VM (or do other VM management).
24 --anaconda | -A arguments
26 Additional anaconda boot arguments
27 --arch architecture
29 Use an alternate CPU architecture (this usually will require
30 additional qemu-system-<arch> to be installed); this probably
31 doesn't work with secureboot
32 --config | -C config
34 Config file for defaults; default is $HOME/.virtinst.cf
35 --cpu | -c count
37 VM CPU cores; default is 1
38 --disk | -d GB
40 VM disk size in gigabytes; default is 6
41 --disk2 GB
43 VM second disk size in gigabytes; default is to not use a
44 second disk (this is mostly just useful for testing kickstart
45 RAID handling)
46 --dns DNS-IPs
48 Set the DNS server(s) (can be specified more than once for
49 multiple servers); default: copy host DNS config when IPv4
50 address is set
51 --dumpks | -D
53 Generate a modified kickstart file and dump to standard out
54 (don't build VM)
55 --gw IPv4-gateway
57 Set the IPv4 gateway
58 --hostname | -h FQDN
60 Set the hostname; default is to not set unless network is set,
61 then use the VM name
62 --ip IPv4-address/mask
64 Set the IPv4 address and netmask (in bits, e.g. 10.0.0.1/24);
65 default is to try DHCP (if network needed)
66 --iso | -i ISO
68 ISO to boot from; default is pulled from KS or to use URL
69 instead. Handles a local ISO file (will be uploaded to same
70 pool as VM storage if needed), or pool/volume for an ISO
71 already in a storage pool.
72 --libvirt | -l URL
74 Connection to libvirt; default is $VIRTSH_DEFAULT_CONNECT_UID
75 or qemu:///system
76 --machine machine
78 Use an alternate machine type rather than the default (e.g. q35
79 for x86_64)
80 --mapfile | -m file
82 URL map file to use different source repos. The format of the
83 file is one entry per line with a pair of URLs separated by a
84 space. The first URL is the original (which can be a
85 mirrorlist or metalink) followed by a target URL to replace it
86 with (mirrorlist/metalink are turned into direct url entries).
87 The default is $HOME/.virtinst-map
88 --name | -n name
90 VM name; default is KS file name minus any leading "ks-"
91 --net | -N interface
93 Bridge network interface to attach to; default is interface
94 with default route
95 --off | -O
97 Leave the VM off at the end of install
98 --pool | -p pool
100 Storage pool name; use pool default by default
101 --os | -o OS
103 OS name, used to set VM hardware config; default is autodetect
104 --quiet | -q
106 Be very quiet - only show errors and IP at end
107 --ram | -r MB
109 VM RAM size in megabytes; default is 2048 unless specified in
110 the KS
111 --screen | -s
113 Open the VM console screen during install
114 --secureboot | -B
116 Enable Secure Boot (implies UEFI).
117 --securepath [path]
119 Specify the path to the Secure Boot loader/NVRAM files (default
120 is /usr/share/edk2/ovmf)
121 --serial | -S
123 Add a serial console; default is to do this, use --noserial to
124 disable
125 --ssh Add found SSH key(s) to the installed system; default is to do
127 this, use --nossh to disable
128 --tpm Add TPM device
130 --uefi | -u
132 Use UEFI boot instead of BIOS
133 --vdelete
135 Delete an existing VM with the same name before creating new
136 (NOTE: will not ask for confirmation!)
137 --verbose | -v
139 Be more verbose
140 --virtinst | -V arguments
142 Additional virt-install arguments (can be used more than once)
143
145 The KS file is parsed for lines that look like #<tag>:<value>.
146 #include pulls in additional files, while the other options set default
147 values (that can still be overridden on the command line).
148 Supported tags:
150 #include:file
152 Include another file - this can be a full path or relative to
153 the kickstart file itself. HTTP/HTTPS URLs are also supported.
154 Includes can appear more than once, including in included
155 files.
156 #CPU:cores
158 Number of CPU cores
159 #RAM:MB RAM size in megabytes
161 #DISK:GB
163 Disk size in gigabytes
164 #DISK2:GB
166 Second disk size in gigabytes
167 #ISO:[pool/]file
169 ISO file/volume to use for install
170 #OS:OS string
172 Operating system (only needed if not autodetected)
173 #(NO)SSH:1
175 Add/don't add SSH keys
176 #(NO)TPM:1
178 Add/don't add TPM device
179 #(NO)UEFI:1
181 Use/don't use UEFI boot
182
184 Written by Chris Adams
185
187 Copyright 2022 Chris Adams. License: GPLv3
188perl v5.36.1 2023-05-06 KS-LIBVIRT(1)