adelsystem_cbi(8)

1ADELSYSTEM_CBI(8)                 NUT Manual                 ADELSYSTEM_CBI(8)
2
3
4

NAME

6       adelsystem_cbi - Driver for the ADELSYSTEM CB/CBI DC-UPS
7

SYNOPSIS

9       adelsystem_cbi -h
10
11       adelsystem_cbi -a DEVICE_NAME [OPTIONS]
12
13           Note
14           This man page only documents the specific features of the
15           adelsystem_cbi driver. For information about the core driver, see
16           nutupsdrv(8).
17

SUPPORTED HARDWARE

19       This is the driver for the adelsystem cb/cbi dc-ups devices.
20
21       The driver has been tested against CBI2801224A, all in one 12/24Vdc
22       DC-UPS.
23
24       More information about this UPS can be found here:
25           https://www.adelsystem.com/en/products/dc-ups-/
26

EXTRA ARGUMENTS

28       This driver supports the following optional settings in the ups.conf(5)
29       file:
30
31   Serial:
32       ser_baud_rate=value
33           A integer specifying the serial port baud rate (default 9600).
34
35       ser_data_bit=value
36           A integer specifying the serial port data bit (default 8).
37
38       ser_parity=value
39           A character specifying the serial port parity (default N).
40
41       ser_stop_bit=value
42           An integer specifying the serial port stop bit (default 1).
43
44   Modbus:
45       dev_slave_id=value
46           An integer specifying the device modbus slave ID (default 1).
47

CONFIGURATION

49       Here is an example of adelsystem_cbi driver configuration in ups.conf
50       file:
51
52           [adelsystem_cbi]
53             driver = adelsystem_cbi
54             port = /dev/ttyUSB0
55             desc = "adelsystem cb/cbi ups driver"
56             # serial settings
57             ser_baud_rate = 9600
58             ser_parity = N
59             ser_data_bit = 8
60             ser_stop_bit = 1
61             # modbus slave id
62             dev_slave_id = 5
63

INSTANT COMMANDS

65       This driver support the following instant commands:
66
67       load.off
68           executes "instant poweroff"
69

INSTALLATION

71       This driver is not built by default. You can build it by installing
72       libmodbus and running configure --with-modbus=yes.
73
74       You also need to give proper permissions on the local serial device
75       file (/dev/ttyUSB0 for example) to allow the run-time NUT driver user
76       account to access it.
77

AUTHOR

79       Dimitris Economou <dimitris.s.economou@gmail.com>
80