1TRIPPLITE(8)                      NUT Manual                      TRIPPLITE(8)
2
3
4

NAME

6       tripplite - Driver for Tripp-Lite SmartPro UPS equipment
7

NOTE

9       This man page only documents the hardware-specific features of the
10       tripplite driver. For information about the core driver, see
11       nutupsdrv(8).
12

SUPPORTED HARDWARE

14       This driver should work on the SmartPro line, including the SMART700
15       and SMART700SER. It only supports SmartPro models that communicate
16       using the serial port.
17

EXTRA ARGUMENTS

19       This driver supports the following optional settings in the
20       ups.conf(5):
21
22       offdelay=num
23           Time to wait before the UPS is turned off after the kill power
24           command is sent. The default value is 64 (in seconds).
25
26       rebootdelay=num
27           Set the timer before the UPS is cycled after the reboot command is
28           sent. The default value is 64 (in seconds).
29
30       startdelay=num
31           Set the time that the UPS waits before it turns itself back on
32           after a reboot command. The default value is 60 (in seconds).
33

KNOWN ISSUES AND BUGS

35       Battery charge information may not be correct for all UPSes. It is
36       tuned to be correct for a SMART700SER. Other models may not provide
37       correct information. Information from the manufacturer would be
38       helpful.
39

AUTHORS

41       •   Rickard E. (Rik) Faith
42
43       •   Nicholas Kain
44

SEE ALSO

46   The core driver:
47       nutupsdrv(8)
48
49   Other drivers for Tripp-Lite hardware:
50       tripplitesu(8), tripplite_usb(8), usbhid-ups(8)
51
52   Internet resources:
53       The NUT (Network UPS Tools) home page: http://www.networkupstools.org/
54
55
56
57Network UPS Tools 2.8.0           04/26/2022                      TRIPPLITE(8)