1CRRCSIM(1) User Manuals CRRCSIM(1)
2
6 crrcsim - a model-airplane flight simulation program
7
9 crrcsim [-fvhV] [-l landscape-file] [-c cdepth] [-x xres] [-y yres]
10 [-d winddir] [-w windvel] [-g config-file] [-s on|off] [-u on|off]
11 [-m AILERON|RUDDER] [-b nr:buttonfunc] [-i method] airplane-file
12
14 crrcsim is a model-airplane flight simulation program for Linux with
15 ports to other platforms. Using crrcsim you can learn how to fly model
16 aircraft, test new aircraft designs, and improve your skills by prac‐
17 ticing in the relative safety of your PC.
18
20 -b nr:buttonfunc
21 Bind a joystick button to a function. nr is the number of the
22 joystick button. For example, -b 2:INCTHROTTLE will increase the
23 current throttle setting by 10% each time button #2 is pressed.
24 See section BUTTON FUNCTIONS for a listing of all possible func‐
25 tions.
26 -c cdepth
28 Color-depth in bits-per-pixel
29 -d winddir
31 Wind direction in degrees.
32 -f Start in fullscreen mode.
34 -g config-file
36 Specify a config file.
37 -h Display help and exit.
39 -i type
41 Select input method.
42 -l landscape-file
44 Load the landscape defined by landscape-file
45 -m AILERON|RUDDER
47 Specify which function is controlled by horizontal mouse move‐
48 ment (if the input method is set to MOUSE).
49 -s on|off
51 Enable/disable sound (default: on).
52 -u on|off
54 Enable/disable graphical user interface (default: on).
55 -v Enable on-screen display of some values. This option may be
57 specified up to three times.
58 -V Only print version information and exit.
60 -w windvel
62 Wind velocity in ft/s.
63 -x xres
65 Horizontal resolution in pixels.
66 -y yres
68 Vertical resolution in pixels.
69
71 PAUSE Pause the simulation.
72 RESUME Resume the simulation from pause mode.
74 RESET Restart the simulation with the current configuration.
76 ZOOMIN Increase the zoom factor of the current view.
78 ZOOMOUT
80 Decrease the zoom factor of the current view.
81 INCTHROTTLE
83 Increase the throttle by 10%.
84 DECTHROTTLE
86 Decrease the throttle by 10%.
87
89 KEYBOARD
90 The airplane is controlled by the keyboard.
91 MOUSE Elevator and either aileron or rudder (depending on the -m
93 option) are controlled by the mouse. Throttle can be adjusted by
94 using the keyboard.
95 JOYSTICK
97 The airplane is controlled by the joystick. Control functions
98 can be mapped to the joystick axes with the -b option.
99 RCTRAN Reads the PPM signal from an r/c transmitter using the parallel
101 port and the rctran kernel module.
102 SERPIC For PPM interfaces connected to a serial port (aka 'FMS inter‐
104 face').
105 SERIAL2
107 A different serial port interface.
108 PARALLEL
110 Reads the PPM signal from an r/c transmitter using the parallel
111 port.
112 AUDIO Reads the PPM signal from an r/c transmitter using a sound card.
114 MNAV Interface to the MNAV autopilot system.
116 ZHENHUA
118 For Walkera transmitters connected directly to the serial port.
119
121 ~/.crrcsim/crrcsim.xml
122 Default configuration file. Overridden by the -g option.
123
125 crrcsim was originally written by Jan Kansky <kansky@ll.mit.edu>. You
126 may contact the current maintainers on the crrcsim-devel mailing list
127 at <crrcsim-devel@lists.sourceforge.net>.
128Linux JULY 2008 CRRCSIM(1)