1IPMCTL-SHOW-CEL(1)                  ipmctl                  IPMCTL-SHOW-CEL(1)
2
3
4

NAME

6       ipmctl-show-cel - Shows the current PMem module firmware Command Effect
7       Log.
8

SYNOPSIS

10           ipmctl show [OPTIONS] -cel [TARGETS]
11

DESCRIPTION

13       Retrieves the PMem module command effect log and presents the response
14       as a list of DimmID, Opcode, SubOpcode and PMem module firmware command
15       effects.
16

OPTIONS

18       -h, -help
19           Displays help for the command.
20
21       -ddrt
22           Used to specify DDRT as the desired transport protocol for the
23           current invocation of ipmctl.
24
25       -smbus
26           Used to specify SMBUS as the desired transport protocol for the
27           current invocation of ipmctl.
28
29           Note
30           The -ddrt and -smbus options are mutually exclusive and may not be
31           used together.
32
33       -lpmb
34           Used to specify large transport payload size for the current
35           invocation of ipmctl.
36
37       -spmb
38           Used to specify small transport payload size for the current
39           invocation of ipmctl.
40
41           Note
42           The -lpmb and -spmb options are mutually exclusive and may not be
43           used together.
44
45       -o (text|nvmxml), -output (text|nvmxml)
46           Changes the output format. One of: "text" (default) or "nvmxml".
47

TARGETS

49       -dimm [DimmIDs]
50           Restricts output to specific PMem modules by supplying one or more
51           comma separated PMem module identifiers. The default is to display
52           all manageable PMem modules.
53

EXAMPLES

55       Lists command effects for all PMem modules installed in the system
56
57           ipmctl show -cel
58
59       Lists command effects for PMem module 0x1001
60
61           ipmctl show -dimm 0x1001 -cel
62

LIMITATIONS

64       In order to successfully execute this command:
65
66       •   The caller must have the appropriate privileges.
67
68       •   The specified PMem modules must be manageable by the host software.
69

RETURN DATA

71       The default behavior is to return a table which lists the command
72       effects per Opcode and SubOpcode.
73
74       DimmID
75           The default display of PMem module identifiers. One of:
76
77           •   UID: Use the DimmUID attribute as defined in the command [Show
78               Dimm].
79
80           •   HANDLE: Use the DimmHandle attribute as defined in the command
81               [Show Dimm]. This is the default.
82
83       Opcode
84           The Opcode for a command.
85
86       SubOpcode
87           The SubOpcode for a command.
88
89       CE Description
90           A comma separated list that includes one or more of:
91
92           •   NE:   No Effect
93
94           •   SSC:  Security State Change
95
96           •   DCC:  DIMM Configuration Change after reboot
97
98           •   IDCC: Immediate DIMM Configuration Change
99
100           •   QIO:  Quiesce All IO
101
102           •   IDDC: Immediate DIMM Data Change
103
104           •   TM:   Test Mode
105
106           •   DM:   Debug Mode
107
108           •   IDPC: Immediate DIMM Policy Change
109
110
111
112ipmctl                            2023-07-20                IPMCTL-SHOW-CEL(1)
Impressum