1NVME-ZNS-CLOSE-ZO(1)              NVMe Manual             NVME-ZNS-CLOSE-ZO(1)
2
3
4

NAME

6       nvme-zns-close-zone - Closes one or all zones
7

SYNOPSIS

9       nvme zns close-zone <device> [--namespace-id=<NUM> | -n <NUM>]
10                                                       [--start-lba=<LBA> | -s <LBA>]
11                                                       [--select-all | -a]
12                                                       [--timeout=<timeout> | -t <timeout>]
13

DESCRIPTION

15       For the NVMe device given, issues the Zone Management Send command with
16       the "Close Zone" action. This will transition the zone to the closed
17       state.
18
19       The <device> parameter is mandatory and may be either the NVMe
20       character device (ex: /dev/nvme0), or a namespace block device (ex:
21       /dev/nvme0n1).
22

OPTIONS

24       -n <NUM>, --namespace-id=<NUM>
25           Use the provided namespace id for the command. If not provided, the
26           namespace id of the block device will be used. If the command is
27           issued to a non-block device, the parameter is required.
28
29       -s <lba>, --start-lba=<lba>
30           The starting LBA of the zone to close.
31
32       -a, --select-all
33           Select all zones for this action
34
35       -t <timeout>, --timeout=<timeout>
36           Override default timeout value. In milliseconds.
37

EXAMPLES

39       •   Close all zones on namespace 1:
40
41               # nvme zns close-zone /dev/nvme0 -a -n 1
42

NVME

44       Part of nvme-cli
45
46
47
48NVMe                              09/29/2023              NVME-ZNS-CLOSE-ZO(1)