1SPAMASSASSIN-RUN(1) User Contributed Perl Documentation SPAMASSASSIN-RUN(1)
2
6 spamassassin - simple front-end filtering script for SpamAssassin
7
9 spamassassin [options] [ < mailmessage | path ... ]
10 spamassassin -d [ < mailmessage | path ... ]
12 spamassassin -r [ < mailmessage | path ... ]
14 spamassassin -k [ < mailmessage | path ... ]
16 spamassassin -W|-R [ < mailmessage | path ... ]
18 Options:
20 -L, --local Local tests only (no online tests)
22 -r, --report Report message as spam
23 -k, --revoke Revoke message as spam
24 -d, --remove-markup Remove spam reports from a message
25 -C path, --configpath=path, --config-file=path
26 Path to standard configuration dir
27 -p prefs, --prefspath=file, --prefs-file=file
28 Set user preferences file
29 --siteconfigpath=path Path for site configs
30 (def: /etc/mail/spamassassin)
31 --cf='config line' Additional line of configuration
32 --pre='config line' Additional line of ".pre" (prepended to configuration)
33 -x, --nocreate-prefs Don't create user preferences file
34 -e, --exit-code Exit with a non-zero exit code if the
35 tested message was spam
36 --mbox read in messages in mbox format
37 --mbx read in messages in UW mbx format
38 -t, --test-mode Pipe message through and add extra
39 report to the bottom
40 --lint Lint the rule set: report syntax errors
41 -W, --add-to-welcomelist Add addresses in mail to persistent address welcomelist
42 --add-to-blocklist Add addresses in mail to persistent address blocklist
43 -R, --remove-from-welcomelist Remove all addresses found in mail from
44 persistent address list
45 --add-addr-to-welcomelist=addr Add addr to persistent address welcomelist
46 --add-addr-to-blocklist=addr Add addr to persistent address blocklist
47 --remove-addr-from-welcomelist=addr Remove addr from persistent address list
48 -4 --ipv4only, --ipv4-only, --ipv4 Use IPv4, disable use of IPv6 for DNS etc.
49 -6 Use IPv6, disable use of IPv4 where possible
50 --progress Print progress bar
51 -D, --debug [area,...] Print debugging messages
52 -V, --version Print version
53 -h, --help Print usage message
54
56 spamassassin is a simple front-end filter for SpamAssassin.
57 Using the SpamAssassin rule base, it uses a wide range of heuristic
59 tests on mail headers and body text to identify "spam", also known as
60 unsolicited bulk email. Once identified, the mail is then tagged as
61 spam for later filtering using the user's own mail user-agent
62 application.
63 The default tagging operations that take place are detailed in
65 "TAGGING" in spamassassin.
66 By default, message(s) are read in from STDIN (< mailmessage), or from
68 specified files and directories (path ...) STDIN and files are assumed
69 to be in file format, with a single message per file. Directories are
70 assumed to be in a format where each file in the directory contains
71 only one message (directories are not recursed and filenames containing
72 whitespace or beginning with "." or "," are skipped). The options
73 --mbox and --mbx can override the assumed format, see the appropriate
74 OPTION information below.
75 Files compressed with gzip/bzip2/xz/lz4/lzip/lzo are uncompressed
77 automatically. See "Mail::SpamAssassin::ArchiveIterator" for more
78 details.
79 Please note that SpamAssassin is not designed to scan huge messages.
81 Messages larger than ~10-20MB should not be fed to SpamAssassin, as
82 memory consumption will increase rapidly.
83
85 -e, --error-code, --exit-code
86 Exit with a non-zero error code, if the message is determined to be
87 spam.
88 -h, --help
90 Print help message and exit.
91 -V, --version
93 Print version and exit.
94 -t, --test-mode
96 Test mode. Pipe message through and add extra report. Note that
97 the report text assumes that the message is spam, since in normal
98 use it is only visible in this case. Pay attention to the score
99 instead.
100 If you run this with -d, the message will first have SpamAssassin
102 markup removed before being tested.
103 -r, --report
105 Report this message as manually-verified spam. This will submit
106 the mail message read from STDIN to various spam-blocker databases.
107 Currently, these are the Distributed Checksum Clearinghouse
108 "https://www.dcc-servers.net/dcc/", Pyzor "https://www.pyzor.org/",
109 Vipul's Razor "http://razor.sourceforge.net/", and SpamCop
110 "https://www.spamcop.net/".
111 If the message contains SpamAssassin markup, the markup will be
113 stripped out automatically before submission. The support modules
114 for DCC, Pyzor, and Razor must be installed for spam to be reported
115 to each service. SpamCop reports will have greater effect if you
116 register and set the "spamcop_to_address" option.
117 The message will also be submitted to SpamAssassin's learning
119 systems; currently this is the internal Bayesian statistical-
120 filtering system (the BAYES rules). (Note that if you only want to
121 perform statistical learning, and do not want to report mail to
122 third-parties, you should use the "sa-learn" command directly
123 instead.)
124 -k, --revoke
126 Revoke this message. This will revoke the mail message read from
127 STDIN from various spam-blocker databases. Currently, these are
128 Vipul's Razor.
129 Revocation support for the Distributed Checksum Clearinghouse,
131 Pyzor, and SpamCop is not currently available.
132 If the message contains SpamAssassin markup, the markup will be
134 stripped out automatically before submission. The support modules
135 for Razor must be installed for spam to be revoked from the
136 service.
137 The message will also be submitted as 'ham' (non-spam) to
139 SpamAssassin's learning systems; currently this is the internal
140 Bayesian statistical-filtering system (the BAYES rules). (Note
141 that if you only want to perform statistical learning, and do not
142 want to report mail to third-parties, you should use the "sa-learn"
143 command directly instead.)
144 --lint
146 Syntax check (lint) the rule set and configuration files, reporting
147 typos and rules that do not compile correctly. Exits with 0 if
148 there are no errors, or greater than 0 if any errors are found.
149 -W, --add-to-welcomelist
151 Previously --add-to-whitelist which will work interchangeably until
152 4.1.
153 Add all email addresses, in the headers and body of the mail
155 message read from STDIN, to a persistent address welcomelist. Note
156 that you must be running "spamassassin" or "spamd" with a
157 persistent address list plugin enabled for this to work.
158 --add-to-blocklist
160 Previously --add-to-blacklist which will work interchangeably until
161 4.1.
162 Add all email addresses, in the headers and body of the mail
164 message read from STDIN, to the persistent address blocklist. Note
165 that you must be running "spamassassin" or "spamd" with a
166 persistent address list plugin enabled for this to work.
167 -R, --remove-from-welcomelist
169 Previously --remove-from-whitelist which will work interchangeably
170 until 4.1.
171 Remove all email addresses, in the headers and body of the mail
173 message read from STDIN, from a persistent address list. STDIN must
174 contain a full email message, so to remove a single address you
175 should use --remove-addr-from-welcomelist instead.
176 Note that you must be running "spamassassin" or "spamd" with a
178 persistent address list plugin enabled for this to work.
179 --add-addr-to-welcomelist
181 Previously --add-addr-to-whitelist which will work interchangeably
182 until 4.1.
183 Add the named email address to a persistent address welcomelist.
185 Note that you must be running "spamassassin" or "spamd" with a
186 persistent address list plugin enabled for this to work.
187 --add-addr-to-blocklist
189 Previously --add-addr-to-blacklist which will work interchangeably
190 until 4.1.
191 Add the named email address to a persistent address blocklist.
193 Note that you must be running "spamassassin" or "spamd" with a
194 persistent address list plugin enabled for this to work.
195 --remove-addr-from-welcomelist
197 Previously --remove-addr-from-whitelist which will work
198 interchangeably until 4.1.
199 Remove the named email address from a persistent address
201 welcomelist. Note that you must be running "spamassassin" or
202 "spamd" with a persistent address list plugin enabled for this to
203 work.
204 --ipv4only, --ipv4-only, --ipv4
206 Do not use IPv6 for DNS tests. Normally, SpamAssassin will try to
207 detect if IPv6 is available, using only IPv4 if it is not. Use if
208 the existing tests for IPv6 availability produce incorrect results
209 or crashes.
210 -L, --local
212 Do only the ''local'' tests, ones that do not require an internet
213 connection to operate. Normally, SpamAssassin will try to detect
214 whether you are connected to the net before doing these tests
215 anyway, but for faster checks you may wish to use this.
216 Note that SpamAssassin's network rules are run in parallel. This
218 can cause overhead in terms of the number of file descriptors
219 required if --local is not used; it is recommended that the minimum
220 limit on fds be raised to at least 256 for safety.
221 -d, --remove-markup
223 Remove SpamAssassin markup (the "SpamAssassin results" report,
224 X-Spam-Status headers, etc.) from the mail message. The resulting
225 message, which will be more or less identical to the original, pre-
226 SpamAssassin input, will be output to STDOUT.
227 (Note: the message will not be exactly identical; some headers will
229 be reformatted due to some features of the Mail::Internet package,
230 but the body text will be.)
231 -C path, --configpath=path, --config-file=path
233 Use the specified path for locating the distributed configuration
234 files. Ignore the default directories (usually
235 "/usr/share/spamassassin" or similar).
236 --siteconfigpath=path
238 Use the specified path for locating site-specific configuration
239 files. Ignore the default directories (usually
240 "/etc/mail/spamassassin" or similar).
241 --cf='config line'
243 Add additional lines of configuration directly from the command-
244 line, parsed after the configuration files are read. Multiple
245 --cf arguments can be used, and each will be considered a separate
246 line of configuration. For example:
247 spamassassin -t --cf="body NEWRULE /text/" --cf="score NEWRULE 3.0"
249 --pre='config line'
251 Add additional lines of .pre configuration directly from the
252 command-line, parsed before the configuration files are read.
253 Multiple --pre arguments can be used, and each will be considered a
254 separate line of configuration. For example:
255 spamassassin -t --pre="loadplugin Mail::SpamAssassin::Plugin::Foobar"
257 -p prefs, --prefspath=prefs, --prefs-file=prefs
259 Read user score preferences from prefs (usually
260 "$HOME/.spamassassin/user_prefs").
261 --progress
263 Prints a progress bar (to STDERR) showing the current progress.
264 This option will only be useful if you are redirecting STDOUT (and
265 not STDERR). In the case where no valid terminal is found this
266 option will behave very much like the --showdots option in other
267 SpamAssassin programs.
268 -D [area,...], --debug [area,...]
270 Produce debugging output. If no areas are listed, all debugging
271 information is printed. Diagnostic output can also be enabled for
272 each area individually; area is the area of the code to instrument.
273 For example, to produce diagnostic output on bayes, learn, and dns,
274 use:
275 spamassassin -D bayes,learn,dns
277 Use an empty string (-D '') to indicate no areas when the next item
279 on the command line is a path, to prevent the path from being
280 parsed as an area.
281 Higher priority informational messages that are suitable for
283 logging in normal circumstances are available with an area of
284 "info".
285 For more information about which areas (also known as channels) are
287 available, please see the documentation at:
288 L<https://wiki.apache.org/spamassassin/DebugChannels>
290 -x, --nocreate-prefs
292 Disable creation of user preferences file.
293 --mbox
295 Specify that the input message(s) are in mbox format. mbox is a
296 standard Unix message folder format.
297 --mbx
299 Specify that the input message(s) are in UW .mbx format. mbx is
300 the mailbox format used within the University of Washington's IMAP
301 implementation; see "https://en.wikipedia.org/wiki/UW_IMAP".
302
304 sa-learn(1) spamd(1) spamc(1) Mail::SpamAssassin::Conf(3)
305 Mail::SpamAssassin(3)
306
308 "Mail::SpamAssassin"
309
311 See <https://issues.apache.org/SpamAssassin/>
312
314 The SpamAssassin(tm) Project <https://spamassassin.apache.org/>
315
317 SpamAssassin is distributed under the Apache License, Version 2.0, as
318 described in the file "LICENSE" included with the distribution.
319perl v5.38.0 2023-07-22 SPAMASSASSIN-RUN(1)