1SYSLINUX(1) General Commands Manual SYSLINUX(1)
2
3
4
6 syslinux - install the SYSLINUX bootloader on a FAT filesystem
7
9 syslinux [OPTIONS] device
10
12 Syslinux is a boot loader for the Linux operating system which operates
13 off an MS-DOS/Windows FAT filesystem. It is intended to simplify first-
14 time installation of Linux, and for creation of rescue and other spe‐
15 cial-purpose boot disks.
16
17 In order to create a bootable Linux floppy using Syslinux, prepare a
18 normal MS-DOS formatted floppy. Copy one or more Linux kernel files to
19 it, then execute the command:
20
21 syslinux --install /dev/fd0
22
23 This will alter the boot sector on the disk and copy a file named
24 ldlinux.sys into its root directory.
25
26 On boot time, by default, the kernel will be loaded from the image
27 named LINUX on the boot floppy. This default can be changed, see the
28 section on the syslinux configuration file.
29
30 If the Shift or Alt keys are held down during boot, or the Caps or
31 Scroll locks are set, syslinux will display a lilo(8) -style "boot:"
32 prompt. The user can then type a kernel file name followed by any ker‐
33 nel parameters. The SYSLINUX bootloader does not need to know about the
34 kernel file in advance; all that is required is that it is a file
35 located in the root directory on the disk.
36
37 Syslinux supports the loading of initial ramdisks (initrd) and the
38 bzImage kernel format.
39
41 -i, --install
42 Install SYSLINUX on a new medium, overwriting any previously
43 installed bootloader.
44
45 -U, --update
46 Install SYSLINUX on a new medium if and only if a version of
47 SYSLINUX is already installed.
48
49 -s, --stupid
50 Install a "safe, slow and stupid" version of SYSLINUX. This ver‐
51 sion may work on some very buggy BIOSes on which SYSLINUX would
52 otherwise fail. If you find a machine on which the -s option is
53 required to make it boot reliably, please send as much info
54 about your machine as you can, and include the failure mode.
55
56 -f, --force
57 Force install even if it appears unsafe.
58
59 -r, --raid
60 RAID mode. If boot fails, tell the BIOS to boot the next device
61 in the boot sequence (usually the next hard disk) instead of
62 stopping with an error message. This is useful for RAID-1 boot‐
63 ing.
64
65 -d, --directory subdirectory
66 Install the SYSLINUX control files in a subdirectory with the
67 specified name (relative to the root directory on the device).
68
69 -t, --offset offset
70 Indicates that the filesystem is at an offset from the base of
71 the device or file.
72
73 --once command
74 Declare a boot command to be tried on the first boot only.
75
76 -O, --clear-once
77 Clear the boot-once command.
78
79 -H, --heads head-count
80 Override the detected number of heads for the geometry.
81
82 -S, --sectors sector-count
83 Override the detected number of sectors for the geometry.
84
85 -z, --zipdrive
86 Assume zipdrive geometry (--heads 64 --sectors 32).
87
89 Configuration file
90 All the configurable defaults in SYSLINUX can be changed by putting a
91 file called syslinux.cfg in the install directory of the boot disk.
92 This is a text file in either UNIX or DOS format, containing one or
93 more of the following items (case is insensitive for keywords).
94
95 This list is out of date.
96
97 In the configuration file blank lines and comment lines beginning with
98 a hash mark (#) are ignored.
99
100 default kernel [ options ... ]
101 Sets the default command line. If syslinux boots automatically,
102 it will act just as if the entries after "default" had been
103 typed in at the "boot:" prompt.
104
105 If no DEFAULT or UI statement is found, or the configuration
106 file is missing entirely, SYSLINUX drops to the boot: prompt
107 with an error message (if NOESCAPE is set, it stops with a "boot
108 failed" message; this is also the case for PXELINUX if the con‐
109 figuration file is not found.)
110
111 NOTE: Until SYSLINUX 3.85, if no configuration file is present, or no
112 "default" entry is present in the configuration file, the
113 default is "linux auto".
114
115 Even earlier versions of SYSLINUX used to automatically
116 append the string "auto" to whatever the user specified using
117 the DEFAULT command. As of version 1.54, this is no longer
118 true, as it caused problems when using a shell as a substitute
119 for "init." You may want to include this option manually.
120
121 append options ...
122 Add one or more options to the kernel command line. These are
123 added both for automatic and manual boots. The options are added
124 at the very beginning of the kernel command line, usually per‐
125 mitting explicitly entered kernel options to override them. This
126 is the equivalent of the lilo(8)
127 "append" option.
128
129 label label
130 kernel image
131 append options ...
132 Indicates that if label is entered as the kernel to boot, sys‐
133 linux should instead boot image, and the specified "append"
134 options should be used instead of the ones specified in the
135 global section of the file (before the first "label" command.)
136 The default for image is the same as label, and if no "append"
137 is given the default is to use the global entry (if any). Use
138 "append -" to use no options at all. Up to 128 "label" entries
139 are permitted.
140
141 The "image" doesn't have to be a Linux kernel; it can be
142 a boot sector (see below.)
143
144 implicit flag_val
145 If flag_val is 0, do not load a kernel image unless it has been
146 explicitly named in a "label" statement. The default is 1.
147
148 timeout timeout
149 Indicates how long to wait at the "boot:" prompt until booting
150 automatically, in units of 1/10 s. The timeout is cancelled as
151 soon as the user types anything on the keyboard, the assumption
152 being that the user will complete the command line already
153 begun. A timeout of zero will disable the timeout completely,
154 this is also the default. The maximum possible timeout value is
155 35996; corresponding to just below one hour.
156
157 serial port [ baudrate ]
158 Enables a serial port to act as the console. "port" is a number
159 (0 = /dev/ttyS0 = COM1, etc.); if "baudrate" is omitted, the
160 baud rate defaults to 9600 bps. The serial parameters are hard‐
161 coded to be 8 bits, no parity, 1 stop bit.
162
163 For this directive to be guaranteed to work properly, it should
164 be the first directive in the configuration file.
165
166 font filename
167 Load a font in .psf format before displaying any output (except
168 the copyright line, which is output as ldlinux.sys itself is
169 loaded.) syslinux only loads the font onto the video card; if
170 the .psf file contains a Unicode table it is ignored. This only
171 works on EGA and VGA cards; hopefully it should do nothing on
172 others.
173
174 kbdmap keymap
175 Install a simple keyboard map. The keyboard remapper used is
176 very simplistic (it simply remaps the keycodes received from the
177 BIOS, which means that only the key combinations relevant in the
178 default layout - usually U.S. English - can be mapped) but
179 should at least help people with AZERTY keyboard layout and the
180 locations of = and , (two special characters used heavily on the
181 Linux kernel command line.)
182
183 The included program keytab-lilo.pl(8) from the lilo(8)
184 distribution can be used to create such keymaps.
185
186 display filename
187 Displays the indicated file on the screen at boot time (before
188 the boot: prompt, if displayed). Please see the section below on
189 DISPLAY files. If the file is missing, this option is simply
190 ignored.
191
192 prompt flag_val
193 If flag_val is 0, display the "boot:" prompt only if the Shift
194 or Alt key is pressed, or Caps Lock or Scroll lock is set (this
195 is the default). If flag_val is 1, always display the "boot:"
196 prompt.
197
198 f1 filename
199 f2 filename
200 ...
201 f9 filename
202 f10 filename
203 f11 filename
204 f12 filename
205 Displays the indicated file on the screen when a function key is
206 pressed at the "boot:" prompt. This can be used to implement
207 pre-boot online help (presumably for the kernel command line
208 options.)
209
210 When using the serial console, press <Ctrl-F><digit> to get to
211 the help screens, e.g. <Ctrl-F>2 to get to the f2 screen. For
212 f10-f12, hit <Ctrl-F>A, <Ctrl-F>B, <Ctrl-F>C. For compatiblity
213 with earlier versions, f10 can also be entered as <Ctrl-F>0.
214
215 Display file format
216 DISPLAY and function-key help files are text files in either DOS or
217 UNIX format (with or without <CR>). In addition, the following special
218 codes are interpreted:
219
220 <FF> = <Ctrl-L> = ASCII 12
221 Clear the screen, home the cursor. Note that the screen is
222 filled with the current display color.
223
224 <SI><bg><fg>, <SI> = <Ctrl-O> = ASCII 15
225 Set the display colors to the specified background and fore‐
226 ground colors, where <bg> and <fg> are hex digits, corresponding
227 to the standard PC display attributes:
228
229 0 = black 8 = dark grey
230 1 = dark blue 9 = bright blue
231 2 = dark green a = bright green
232 3 = dark cyan b = bright cyan
233 4 = dark red c = bright red
234 5 = dark purple d = bright purple
235 6 = brown e = yellow
236 7 = light grey f = white
237
238 Picking a bright color (8-f) for the background results in the
239 corresponding dark color (0-7), with the foreground flashing.
240
241 colors are not visible over the serial console.
242
243 <CAN>filename<newline>, <CAN> = <Ctrl-X> = ASCII 24
244 If a VGA display is present, enter graphics mode and display the
245 graphic included in the specified file. The file format is an
246 ad hoc format called LSS16; the included Perl program "ppm‐
247 tolss16" can be used to produce these images. This Perl program
248 also includes the file format specification.
249
250 The image is displayed in 640x480 16-color mode. Once in graph‐
251 ics mode, the display attributes (set by <SI> code sequences)
252 work slightly differently: the background color is ignored, and
253 the foreground colors are the 16 colors specified in the image
254 file. For that reason, ppmtolss16 allows you to specify that
255 certain colors should be assigned to specific color indicies.
256
257 Color indicies 0 and 7, in particular, should be chosen with
258 care: 0 is the background color, and 7 is the color used for the
259 text printed by SYSLINUX itself.
260
261 <EM>, <EM> = <Ctrl-U> = ASCII 25
262 If we are currently in graphics mode, return to text mode.
263
264 <DLE>..<ETB>, <Ctrl-P>..<Ctrl-W> = ASCII 16-23
265 These codes can be used to select which modes to print a certain
266 part of the message file in. Each of these control characters
267 select a specific set of modes (text screen, graphics screen,
268 serial port) for which the output is actually displayed:
269
270 Character Text Graph Serial
271 ------------------------------------------------------
272 <DLE> = <Ctrl-P> = ASCII 16 No No No
273 <DC1> = <Ctrl-Q> = ASCII 17 Yes No No
274 <DC2> = <Ctrl-R> = ASCII 18 No Yes No
275 <DC3> = <Ctrl-S> = ASCII 19 Yes Yes No
276 <DC4> = <Ctrl-T> = ASCII 20 No No Yes
277 <NAK> = <Ctrl-U> = ASCII 21 Yes No Yes
278 <SYN> = <Ctrl-V> = ASCII 22 No Yes Yes
279 <ETB> = <Ctrl-W> = ASCII 23 Yes Yes Yes
280
281 For example:
282 <DC1>Text mode<DC2>Graphics mode<DC4>Serial port<ETB>
283 ... will actually print out which mode the console is in!
284
285 <SUB> = <Ctrl-Z> = ASCII 26
286 End of file (DOS convention).
287
288 Other operating systems
289 This version of syslinux supports chain loading of other operating sys‐
290 tems (such as MS-DOS and its derivatives, including Windows 95/98).
291
292 Chain loading requires the boot sector of the foreign operating system
293 to be stored in a file in the root directory of the filesystem.
294 Because neither Linux kernels, nor boot sector images have reliable
295 magic numbers, syslinux will look at the file extension. The following
296 extensions are recognised:
297
298 none or other Linux kernel image
299 BSS Boot sector (DOS superblock will be patched in)
300 BS Boot sector
301
302 For filenames given on the command line, syslinux will search for the
303 file by adding extensions in the order listed above if the plain file‐
304 name is not found. Filenames in KERNEL statements must be fully quali‐
305 fied.
306
307 Novice protection
308 Syslinux will attempt to detect if the user is trying to boot on a 286
309 or lower class machine, or a machine with less than 608K of low ("DOS")
310 RAM (which means the Linux boot sequence cannot complete). If so, a
311 message is displayed and the boot sequence aborted. Holding down the
312 Ctrl key while booting disables this feature.
313
314 The compile time and date of a specific syslinux version can be
315 obtained by the DOS command "type ldlinux.sys". This is also used as
316 the signature for the LDLINUX.SYS file, which must match the boot sec‐
317 tor
318
319 Any file that syslinux uses can be marked hidden, system or readonly if
320 so is convenient; syslinux ignores all file attributes. The SYSLINUX
321 installed automatically sets the readonly attribute on LDLINUX.SYS.
322
323 Bootable CD-ROMs
324 SYSLINUX can be used to create bootdisk images for El Torito-compatible
325 bootable CD-ROMs. However, it appears that many BIOSes are very buggy
326 when it comes to booting CD-ROMs. Some users have reported that the
327 following steps are helpful in making a CD-ROM that is bootable on the
328 largest possible number of machines:
329
330 · Use the -s (safe, slow and stupid) option to SYSLINUX
331
332 · Put the boot image as close to the beginning of the ISO 9660
333 filesystem as possible.
334
335 A CD-ROM is so much faster than a floppy that the -s option shouldn't
336 matter from a speed perspective.
337
338 Of course, you probably want to use ISOLINUX instead. See the documen‐
339 tation file isolinux.doc.
340
341 Booting from a FAT partition on a hard disk
342 SYSLINUX can boot from a FAT filesystem partition on a hard disk
343 (including FAT32). The installation procedure is identical to the pro‐
344 cedure for installing it on a floppy, and should work under either DOS
345 or Linux. To boot from a partition, SYSLINUX needs to be launched from
346 a Master Boot Record or another boot loader, just like DOS itself
347 would. A sample master boot sector (mbr.bin) is included with SYSLINUX.
348
350 I would appreciate hearing of any problems you have with SYSLINUX. I
351 would also like to hear from you if you have successfully used SYS‐
352 LINUX, especially if you are using it for a distribution.
353
354 If you are reporting problems, please include all possible information
355 about your system and your BIOS; the vast majority of all problems
356 reported turn out to be BIOS or hardware bugs, and I need as much
357 information as possible in order to diagnose the problems.
358
359 There is a mailing list for discussion among SYSLINUX users and for
360 announcements of new and test versions. To join, send a message to
361 majordomo@linux.kernel.org with the line:
362
363 subscribe syslinux
364
365 in the body of the message. The submission address is sys‐
366 linux@linux.kernel.org.
367
369 lilo(8), keytab-lilo.pl(8), fdisk(8), mkfs(8), superformat(1).
370
372 This manual page is a modified version of the original syslinux docu‐
373 mentation by H. Peter Anvin <hpa@zytor.com>. The conversion to a man‐
374 page was made by Arthur Korn <arthur@korn.ch>.
375
376
377
378SYSLINUX 19 July 2010 SYSLINUX(1)