1SISUSB(4) Kernel Interfaces Manual SISUSB(4)
2
3
4
6 sisusb - SiS USB video driver
7
9 Section "Device"
10 Identifier "devname"
11 Driver "sisusb"
12 ...
13 EndSection
14
16 sisusb is an Xorg driver for SiS (Silicon Integrated Systems) video
17 chips that are connected via a Net2280-based USB dongle. The driver is
18 not accelerated, but provides support for colordepths of 8, 16 and 24
19 bpp as well as Render and other extensions.
20
22 The sisusb driver supports USB video cards based on the following
23 chipsets:
24
25 SiS315E/PRO
26
27 The SiS315E/PRO features two CRT controllers. However, in its USB ver‐
28 sion, only the first output, referred to as "CRT1", is being used.
29
31 Please refer to xorg.conf(5x) for general configuration details and to
32 sis(4) for more information. This manpage only covers a subset of the
33 supported options.
34
35 Detailed information on all supported options can be obtained at
36 http://www.winischhofer.at/linuxsisusbvga.shtml
37
38 Please note that this driver requires a Linux kernel driver as well
39 which is included in Linux 2.6.12 and later, as well as available at
40 the aforementioned website.
41
42 The following driver Options are supported:
43
44 Option "HWCursor" "boolean"
45 Enable or disable the hardware cursor. It is not recommended to
46 disable the hardware cursor as this will increase the amount of
47 data transferred over the USB. Default: HWCursor is on.
48
49 Option "SWCursor" "boolean"
50 The opposite of HWCursor. This enables or disables the software
51 cursor. This sort of cursor is slower because the pointer must
52 be painted into the graphics display. This increases the amount
53 of data transferred over the USB significantly. Default: SWCur‐
54 sor is off.
55
56 Option "CRT1Gamma" "boolean"
57 Enable or disable gamma correction. Default: Gamma correction
58 is on.
59
60 Option "DisconnectTimeout" "integer"
61 This option determines how the driver will react to a disconnec‐
62 tion of the USB device. If the integer supplied is -1, the
63 driver will abort the X server immediately upon disconnection.
64 If the value given is 0, the driver will probe for a re-connec‐
65 tion every 2 seconds and in case the device is detected, re-
66 establish the display. If the value is greater than 0, the
67 driver will do this re-probing within the given number of sec‐
68 onds and abort the server if it does not detect the device
69 within this time-out. Default: 0 (probe forever for device
70 reconnection).
71
73 none.
74
76 Xorg(1x), xorg.conf(5x), xorgconfig(1x), Xserver(1x), X(7), sis(4)
77
78
79
80
81 http://www.winischhofer.at/linuxsisvga.shtml for more information and
82 updates
83
85 Author: Thomas Winischhofer
86
87
88
89X Version 11 xf86-video-sisusb 0.8.1 SISUSB(4)