1qmail_start_selinux(8) SELinux Policy qmail_start qmail_start_selinux(8)
2
6 qmail_start_selinux - Security Enhanced Linux Policy for the
7 qmail_start processes
8
10 Security-Enhanced Linux secures the qmail_start processes via flexible
11 mandatory access control.
12 The qmail_start processes execute with the qmail_start_t SELinux type.
14 You can check if you have these processes running by executing the ps
15 command with the -Z qualifier.
16 For example:
18 ps -eZ | grep qmail_start_t
20
24 The qmail_start_t SELinux type can be entered via the
25 qmail_start_exec_t file type.
26 The default entrypoint paths for the qmail_start_t domain are the fol‐
28 lowing:
29 /var/qmail/bin/qmail-start
31
33 SELinux defines process types (domains) for each process running on the
34 system
35 You can see the context of a process using the -Z option to ps
37 Policy governs the access confined processes have to files. SELinux
39 qmail_start policy is very flexible allowing users to setup their
40 qmail_start processes in as secure a method as possible.
41 The following process types are defined for qmail_start:
43 qmail_start_t
45 Note: semanage permissive -a qmail_start_t can be used to make the
47 process type qmail_start_t permissive. SELinux does not deny access to
48 permissive process types, but the AVC (SELinux denials) messages are
49 still generated.
50
53 SELinux policy is customizable based on least access required.
54 qmail_start policy is extremely flexible and has several booleans that
55 allow you to manipulate the policy and run qmail_start with the tight‐
56 est access possible.
57 If you want to allow all daemons to write corefiles to /, you must turn
61 on the allow_daemons_dump_core boolean. Disabled by default.
62 setsebool -P allow_daemons_dump_core 1
64 If you want to allow all daemons to use tcp wrappers, you must turn on
68 the allow_daemons_use_tcp_wrapper boolean. Disabled by default.
69 setsebool -P allow_daemons_use_tcp_wrapper 1
71 If you want to allow all daemons the ability to read/write terminals,
75 you must turn on the allow_daemons_use_tty boolean. Disabled by
76 default.
77 setsebool -P allow_daemons_use_tty 1
79 If you want to allow all domains to use other domains file descriptors,
83 you must turn on the allow_domain_fd_use boolean. Enabled by default.
84 setsebool -P allow_domain_fd_use 1
86 If you want to allow sysadm to debug or ptrace all processes, you must
90 turn on the allow_ptrace boolean. Disabled by default.
91 setsebool -P allow_ptrace 1
93 If you want to enable cluster mode for daemons, you must turn on the
97 daemons_enable_cluster_mode boolean. Disabled by default.
98 setsebool -P daemons_enable_cluster_mode 1
100 If you want to allow all domains to have the kernel load modules, you
104 must turn on the domain_kernel_load_modules boolean. Disabled by
105 default.
106 setsebool -P domain_kernel_load_modules 1
108 If you want to allow all domains to execute in fips_mode, you must turn
112 on the fips_mode boolean. Enabled by default.
113 setsebool -P fips_mode 1
115 If you want to enable reading of urandom for all domains, you must turn
119 on the global_ssp boolean. Disabled by default.
120 setsebool -P global_ssp 1
122 If you want to enable support for upstart as the init program, you must
126 turn on the init_upstart boolean. Enabled by default.
127 setsebool -P init_upstart 1
129
133 The SELinux process type qmail_start_t can manage files labeled with
134 the following file types. The paths listed are the default paths for
135 these file types. Note the processes UID still need to have DAC per‐
136 missions.
137 cluster_conf_t
139 /etc/cluster(/.*)?
141 cluster_var_lib_t
143 /var/lib(64)?/openais(/.*)?
145 /var/lib(64)?/pengine(/.*)?
146 /var/lib(64)?/corosync(/.*)?
147 /usr/lib(64)?/heartbeat(/.*)?
148 /var/lib(64)?/heartbeat(/.*)?
149 /var/lib(64)?/pacemaker(/.*)?
150 /var/lib/cluster(/.*)?
151 cluster_var_run_t
153 /var/run/crm(/.*)?
155 /var/run/cman_.*
156 /var/run/rsctmp(/.*)?
157 /var/run/aisexec.*
158 /var/run/heartbeat(/.*)?
159 /var/run/cpglockd.pid
160 /var/run/corosync.pid
161 /var/run/rgmanager.pid
162 /var/run/cluster/rgmanager.sk
163 initrc_tmp_t
165 mnt_t
168 /mnt(/[^/]*)
170 /mnt(/[^/]*)?
171 /rhev(/[^/]*)?
172 /media(/[^/]*)
173 /media(/[^/]*)?
174 /etc/rhgb(/.*)?
175 /media/.hal-.*
176 /net
177 /afs
178 /rhev
179 /misc
180 root_t
182 /
184 /initrd
185 tmp_t
187 /tmp
189 /usr/tmp
190 /var/tmp
191 /tmp-inst
192 /var/tmp-inst
193 /var/tmp/vi.recover
194
197 SELinux requires files to have an extended attribute to define the file
198 type.
199 You can see the context of a file using the -Z option to ls
201 Policy governs the access confined processes have to these files.
203 SELinux qmail_start policy is very flexible allowing users to setup
204 their qmail_start processes in as secure a method as possible.
205 The following file types are defined for qmail_start:
207 qmail_start_exec_t
211 - Set files with the qmail_start_exec_t type, if you want to transition
213 an executable to the qmail_start_t domain.
214 Note: File context can be temporarily modified with the chcon command.
218 If you want to permanently change the file context you need to use the
219 semanage fcontext command. This will modify the SELinux labeling data‐
220 base. You will need to use restorecon to apply the labels.
221
224 semanage fcontext can also be used to manipulate default file context
225 mappings.
226 semanage permissive can also be used to manipulate whether or not a
228 process type is permissive.
229 semanage module can also be used to enable/disable/install/remove pol‐
231 icy modules.
232 semanage boolean can also be used to manipulate the booleans
234 system-config-selinux is a GUI tool available to customize SELinux pol‐
237 icy settings.
238
241 This manual page was auto-generated using sepolicy manpage .
242
245 selinux(8), qmail_start(8), semanage(8), restorecon(8), chcon(1) , set‐
246 sebool(8)
247qmail_start 15-06-03 qmail_start_selinux(8)