1iscsiuio(8)                 System Manager's Manual                iscsiuio(8)
2
3
4

NAME

6       iscsiuio - iSCSI UserSpace I/O driver
7

SYNOPSIS

9       iscsiuio [-d-f-v]
10

DESCRIPTION

12       iscsiuio  is  the  UserSpace  I/O  driver  for  the QLogic NetXtreme II
13       BCM5706/5708/5709 series PCI/PCI-X Gigabit Ethernet  Network  Interface
14       Card      (NIC)     and     for     the     QLogic     NetXtreme     II
15       BCM57710/57711/57712/57800/57810/57840 series PCI-E 10 Gigabit Ethernet
16       Network  Interface  Card.  The driver has been tested on 2.6.28 kernels
17       and above.
18
19       Refer to the README.TXT from the driver package on how to  compile  and
20       install the driver.
21
22       Refer  to various Linux documentations on how to configure network pro‐
23       tocol and address.
24

DRIVER DEPENDENCIES

PARAMETERS

27       There are very few parameters when running this application.
28
29       -d<debuglevel>
30              This is to enable debug mode where debug messages will  be  sent
31              to stdout The following debug modes are supported
32
33              DEBUG         4 - Print all messages
34
35              INFO           3  - Print messages needed to follow the uIP code
36              (default)
37
38              WARN          2 - Print warning messages
39
40              ERROR         1 - Only print critical errors
41
42       -f     This is to enable foreground mode so that  this  applica‐
43              tion doesn't get sent into the background.
44
45       -v     This is to print the version.
46
47       -p<pidfile>
48              Use pidfile (default  /var/run/iscsiuio.pid )
49
50       -h     Display this help and exit.
51
52
53

AUTHOR

55       Benjamin Li - benli@broadcom.com
56
57       Eddie Wai - eddie.wai@broadcom.com
58

Maintained by

60       QLogic-Storage-Upstream@qlogic.com
61
62
63
64QLogic Corporation                12/10/2013                       iscsiuio(8)